• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.6
• /
• pp.755-763
• /
• 2014

In this paper, a System Dynamics(SD) computer simulation model has been developed to assess the effects of developing and providing an alternate water source. A water service index was also developed to estimate the level of overall customer satisfaction on water supply service. Data from the Busan water supply service and the Korea Development Institute regarding the Nak Dong river bank storage development were utilized during the modeling processes. Some important indicators of the system under study were analyzed by the simulations of development of the alternate water source for Busan. The developed SD model and the water service index can be further utilized as a tool that can assess the extent and timing of an additional service improvement project.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.1
• /
• pp.113-124
• /
• 1998

This paper has simulated JIT production system. One of the well-known production management system, JIT, was first developed in Toyota in Japan during 1970's. Its contribution to productivity and quality improvement seemingly predicts its wider use. The JIT system has been proved its effectiveness lot production management system by many industries, however the effectiveness of its application in non-repetitive productions is yet uncertain. In this respect, this paper develope the JIT simulation model, and this JIT model are evaluated by using a SIMAN simulation. It has proved that the performances of JIT model are excellent.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.524-530
• /
• 1999

This paper describes performance analysis techniques for SSSC using computer simulations with EMPT and experiments with a hardware scaled-model. A switching-level simulation model with EMTP was developed for the SSSC connected in series with the transmission line. The increase of transmission capability and dynamic performance was analyzed with the simulation model. The simulation results were reverified by experimental works with a hardware scaled-model. The developed analysis techniques can be used for designing and evaluating actual system of SSSC.

• Journal of the Korea Society for Simulation
• /
• v.10 no.2
• /
• pp.33-46
• /
• 2001

Recently, the usage of containers in marine transportation is rapidly increasing. The problem of ship stability is important because of its direct influence to the loss of the human-life, ship, and merchandise. However, the assessment for ship stability during container loading/unloading in port is dependent on human experience only. On the other hand, the emerging information and communication technologies of shipbuilding industrial environments are rapidly changing. To respond to the situation, a new paradigm has been matured with new concepts such as the concrete method. Especially, all the efforts are shown to be concentrated to realize the concept of Simulation Based Design(SBD) based on three dimensional Computer Aided Design(CAD) model. In this paper, ship model-based simulation methodology for design and operation of ship is suggested, and for the verification of suggested methodology, the system for stability assessment of ship during container loading/unloading was developed using ENVISION, a general-purpose simulation system. The developed system consists of geometric modeling subsystem, basic calculation subsystem, and Computer Aided Engineering(CAE) subsystem. In addition, interface to CAE/CAD /simulation system such as SIKOB and ENVISION is provided.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1127-1136
• /
• 1993

A mathematical model has been developed for the simulation of static stability of agricultural tractors. The model was based on Reichmann's model but modified to improve its shortcomings for practical applications. Two examples of model simulation were presented and showed its usefulness in evaluating the control and stability loss boundaries.

• Journal of the military operations research society of Korea
• /
• v.25 no.1
• /
• pp.199-214
• /
• 1999

The Constructive Battle Simulation Model is very important to the recent military training for the substitution of the field training. However, real battlefield systems operate under real-time conditions, they are inherently distributed, concurrent and dynamic. In order to reflect these properties by the computer-based simulation systems which represent real world processes, we have been developing constructive simulation model for several years. Conventionally, scheduling and resource allocation activities which have timing constraints, we elaborated on these issues and developed the simulation system on commercially available hardware and operating system with lock-free resource allocation scheme and rate monotonic scheduling.

• Korean System Dynamics Review
• /
• v.12 no.4
• /
• pp.125-156
• /
• 2011

The information service management models developed thus far have put their focuses mostly on technical dimensions of information systems (IS), finding their rationale from the goods-dominant logic (GDL) that IS as goods has value in itself. Information systems, however, is nothing more than a mechanism by which value is delivered to the users. According to the service-dominant logic (SDL), value is created and determined not at the time serve is made by the providers but at the time it is consumed by the users. The users therefore should be regarded as active value creators not as passive consumers of the value delivered by the providers. Based on the service-dominant logic, DISQM (Dynamic Information Service Quality Model) is developed. DISQM's backbone is designed in causal loop diagrams referring to and reinterpreting in systems thinking the 'Parasuraman, Zeithaml & Berry's GAP Model' and 'SERVQUAL' as an operational tool for the GAP Model, and the main IS success constructs are mapped onto the model exploiting the 'DeLone & MacLean's IS Success Model'. With VENSIM simulation software, this paper also shows how DISQM works in computer-simulation settings. After confirming DISQM's validity with the base simulation run, two scenarios are developed for the exemplary purpose and tested in terms of IS quality, service quality, and net benefits from the service for the public information service. Implications from the simulation runs are also discussed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.94-99
• /
• 1999

In this Paper, the estimation method of painting process in the automobile plant using computer simulation techniques is studied to improve the bottle neck process, the weak point and the productivity. For model and analysis, Promodel is used which is a manufacturing oriented simulation software developed by Promodel corporation in the U.S.A. Firstly the result of the simulation shows that we can obtain capability improvement in the system performance using computer simulation. Secondly, the optimum system specification is decided by comparing reports generated by scenario in simulation program find out the suitable conditions. Finally, the speed of conveyor and a pitch of painting body as the most critical parameters are chosen on the basis of exhaustive field evaluation to study their effects o the capacity of the process. The best alternative condition for the maximum capacity of the process is selected by computer simulation.

• Korean System Dynamics Review
• /
• v.7 no.1
• /
• pp.67-90
• /
• 2006

A series of system dynamics model was developed for forecasting demand and supply of human resource in the electricity industry. To forecast demand of human resource in the electric power industry, BLS (Bureau of Labor Statistics) methodology was used. To forecast supply of human resource in the electric power industry, forecasting on the population of our country and the number of students in the department of electrical engineering were performed. After performing computer simulation with developed system dynamics model, it is discovered that the shortage of human resource in the electric power industry will be 3,000 persons per year from 2006 to 2015, and more than a double of current budget is required to overcome this shortage of human resource.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.