• 대한조선학회지
• /
• 제10권1호
• /
• pp.1-14
• /
• 1973

In the Department of Naval Architecture, Seoul National University, the development of computer programs for the computer-aided ship design sponsored by the Ministry of Science and Technology has been begun. The project is to be accomplished as a four-year plan, and the results of the works of the first year, preliminary design of dry-cargo ships based on an optimization technique and some fundamental calculations accompanied with the basic design of ships such as calculations of displacement, hydrostatic characteristics of hull forms, stability, floodable length, load line and longitudinal section modulus, are given in the Report R-72-9[9] published by the sopnsor for the public interests. In this paper, the philosophy and methodological principles with which the preliminary design program given in Appendix II was developed are summerized.

• 대한치과기공학회지
• /
• 제46권3호
• /
• pp.61-66
• /
• 2024

Purpose: This study aimed to assess the accuracy of implant custom abutments according to the different radii of the curvature value. Methods: Two custom abutments with different radii of the curvature value were designed based on dental computer-aided design. Then, a total of 20 customized abutments, 10 of each design, were milled according to the designs. The fabricated custom abutments were scanned using a model scanner. Using Geomagic Control X (3D Systems) scanned files were superimposed on the designed files to evaluate trueness, and scanned files for each group were superimposed on each other to evaluate precision. Results: The trueness values of radius of curvature value (CV)-0.75 and CV-1.50 were 56.26±5.66 ㎛ and 47.10±2.64 ㎛, respectively. A significant difference (p<0.001) was found between the groups. The precision values of CV-0.75 and CV-1.50 were 26.87±1.24 ㎛ and 26.08±1.03 ㎛, respectively. No significant difference was found between the groups. Conclusion: The radius of the curvature value in the custom abutment design affected the machining accuracy.

• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.427-435
• /
• 2017

임플란트를 이용한 완전 무치악 환자의 치료에 있어 가장 중요한 것은 최종 보철물의 형태이며, 최종 보철물의 형태가 결정된 후 잔존골 분석 및 식립할 임플란트의 종류, 개수, 위치 등에 대한 선택이 이루어져야 한다. 본 증례는 상악 우측 측절치를 제외하고 전악에 임플란트가 식립된 채로 내원한 환자에 대해 고정성 보철 수복한 증례이다. 최종 보철물에 대한 고려 없이 임플란트가 식립되었기 때문에 먼저 총의치를 제작하여 안모 분석 및 고정성 보철 수복 가능성을 평가하였다. 고정성 보철 수복이 가능하다고 판단되어 진단 납형, 방사선 영상 및 디지털 분석을 통해 최종 보철물에 사용할 수 없는 임플란트를 치료계획에서 제외한 후 고정성 임시 보철물을 제작하였다. 4개월 동안 고정성 임시 보철물을 사용하면서 안정적인 교합과 심미적인 만족을 보였기에 CAD/CAM (Computer aided design and computer aided manufacturing)을 이용하여 지르코니아 최종 보철물로 이행하였고, 치료 종료 후 3개월 동안의 평가에서 만족스러운 결과를 얻었다.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1085-1091
• /
• 2014

Recently, 3D printing has received increasing attention due to its boundless potentials. Because 3D printing starts from 3D geometry information, computer-aided design (CAD) is an essential technology to build 3D geometry data. These days, education of 3D CAD for engineering students has been changed from the theoretical lecture to practical design training using commercial CAD software. As a result, open-ended design projects have replaced the traditional theoretical examinations to evaluate students' outcomes. However, such design projects are not enough to evaluate students' outcomes because their results are expressed in two-dimensional ways. In this paper, applications of 3D printing in engineering design education are discussed by describing the procedure and outcomes of design projects. It was found that the use of 3D printing could improve students' outcomes by fabricating real physical models out of their designs.

• 호남수학학술지
• /
• 제27권4호
• /
• pp.665-672
• /
• 2005

By its simplicity and efficiency, subdivision is a widely used technique in computer graphics, computer aided design and data compression. In this paper we prove a regularity theorem for ternary interpolatory subdivision scheme that can be applied to non-stationary subdivision. This theorem converts the convergence of the limit curve of a ternary interpolatory subdivision to the analysis of the rate of the contraction of differences of the polygons.

• 대한전기학회논문지
• /
• 제33권2호
• /
• pp.47-55
• /
• 1984

This paper is concerned with a computer-aided state assignment, that is, coding race-free internal states of asynchronous sequential circuits, and a method for minimizing the combinational network of asynchronous sequential circuits. The FORTRAN version of the peoposed algorithm results in race-free state assignments and reduction of the number of connections and gates with near minimal hardware cost. Some examples are designed by the proposed computer program to illustrate the algorithm in this paper. Finally, results are compared with those of the other methods.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.38-44
• /
• 1996

The CAD system for design and drawing of limit gauges was constructed and developed. This system was made by Visual Basic program. Using this system, drawings together with concerned data for the manufacturing of limit gauges are generated on the screen, file and printer. The data base was constructed by referring handbooks, textbooks, relevant standards and regulations. This system was proved a powerful tool for design and drawing of limit gauges by actual applications. The output drawings from this system are in good agreement with the drawings and data of the concerned standards and regulations.

• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.123-132
• /
• 1987

In this paper, we studied on the design of elliptic digital filters using the bilinear z transformation method, and proposed a design procedure satisfying prescribed specifications. The magnitude characteristics of digital filters are compared with its of analog filiters by computer simulation. Finaly we considered the quantization effects of digital filters. In cascader realization of fixed-point digital filters under dynamic range constraints, the outpout noise for IIR digital filters depends on the pole-zero pairing and ordering of the second order sections. Therfore an optmization procedure to finding a good ordering and pairing is very desirable. Thus, we proposed a sub-optimization procedure for finding "near optimal" solution.

• 소성∙가공
• /
• 제5권1호
• /
• pp.27-36
• /
• 1996

In this paper a computer-aided design system for axisymmetric deep drawing process will be described. An approach to the system is based on the knowledge based system. The system has been written in AutoLISP with personal computer. The system is composed of four main modules such as input geometrical design test & rectification and user modification. the system which aids designer provides powerful capabilities for the design of axisymmetric deep drawing process.

• 대한토목학회논문집
• /
• 제3권2호
• /
• pp.61-72
• /
• 1983

본(本) 연구(硏究)는 Computer Graphic System(CGS)을 이용한 선상시설물측량(線狀施設物測量)의 설계도면작성(設計圖面作成)에 관한 고안(考案)이다. 본(本) 연구(硏究)를 통(通)하여, 측량설계도면(測量設計圖面)을 작성(作成)할 경우 선(線), 글자 등(等)의 표현방법(表現方法)에 관한 문제점(問題點)을 효과적으로 처리(處理)할 수 있는 프로그램을 개발(開發)하므로써 금후(今後) Computer Aided Design에 기여(寄與)코자 하는데 본(本) 논문(論文)의 의의(意義)를 두고 있다.