• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.77-77
• /
• 2016

Thin films synthesized by plasma processes have been widely applied in a variety of industrial sectors. The structure control of thin film is one of prime factor in most of these applications. It is well known that the structure of this film is closely associated with plasma parameters and species of plasma which are electrons, ions, radical and neutrals in plasma processes. However the precise control of structure by plasma process is still limited due to inherent complexity, reproducibility and control problems in practical implementation of plasma processing. Therefore the study on the fundamental physical properties that govern the plasmas becomes more crucial for molecular scale control of film structure and corresponding properties for new generation nano scale film materials development and application. The thin films are formed through nucleation and growth stages during thin film depostion. Such stages involve adsorption, surface diffusion, chemical binding and other atomic processes at surfaces. This requires identification, determination and quantification of the surface activity of the species in the plasma. Specifically, the ions and neutrals have kinetic energies ranging from ~ thermal up to tens of eV, which are generated by electron impact of the polyatomic precursor, gas phase reaction, and interactions with the substrate and reactor walls. The present work highlights these aspects for the controlled and low-temperature plasma enhanced chemical vapour disposition (PECVD) of Si-based films like crystalline Si (c-Si), Si-quantum dot, and sputtered crystalline C by the design and control of radicals, plasmas and the deposition energy. Additionally, there is growing demand on the low-temperature deposition process with low hydrogen content by PECVD. The deposition temperature can be reduced significantly by utilizing alternative plasma concepts to lower the reaction activation energy. Evolution in this area continues and has recently produced solutions by increasing the plasma excitation frequency from radio frequency to ultra high frequency (UHF) and in the range of microwave. In this sense, the necessity of dedicated experimental studies, diagnostics and computer modelling of process plasmas to quantify the effect of the unique chemistry and structure of the growing film by radical and plasma control is realized. Different low-temperature PECVD processes using RF, UHF, and RF/UHF hybrid plasmas along with magnetron sputtering plasmas are investigated using numerous diagnostics and film analysis tools. The broad outlook of this work also outlines some of the 'Grand Scientific Challenges' to which significant contributions from plasma nanoscience-related research can be foreseen.

• Land and Housing Review
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2017

The BIM design is expected to expand to the domestic and overseas construction industries, depending on the effect of construction productivity and quality improvement. However, with the obligation of Public Procurement Service to design the BIM design, it includes a design error and the problem of utilization of 3D design by choosing a simple 2D to 3D remodelling method that can not be modelled in 3D modeling or use of the construction and maintenance phases. The results reviewed by BIM design results were largely underutilized and were not even performed with the verification of the error. In order to resolve this, one must develop the check system that secures the quality of BIM design and ensure that the reliability of BIM results are available. In this study, it is designed to develop a program that can automatically verify the design of the BIM design results such as violation of the rules of the BIM design, design flaws, and improve the usability of the BIM design. In particular, this programs were developed not only to identify programmes that were not commercially available, but also to validate drawings in low-light computer environments. The developed program(LH-BIM) store the information of attribute extracted from the Revit file(ArchiCAD, IFC file included) in the integrated DB. This provides the ability to freely lookup the features and properties of drawings delivered exclusively by the LH-BIM Program without using the Revit tools. By doing so, it was possible to resolve the difficulties of using traditional commercial programs and to ensure that they operate only with traditional PC performance. Further, the results of the various BIM software can be readily validated, which can be solved the conversion process error of IFC in the case of SMC. Additionally, the developed program has the ability to automatically check the error and design criteria of the drawings, as well as the ability to calculate the area estimation. These functions allow businesses to apply simple and easy tasks to operate tasks of BIM modelling. The developed system(LH-BIM) carried out a verification test by reviewing the review of the BIM Design model of the Korea Land & Housing Corporation. It is hoped that the verification system will not only be able to achieve the Quality of BIM design, but also contribute to the expansion of BIM and future construction BIM.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.9-16
• /
• 1999

When the conventional IPD (inter-poly-dielctrics) layer with ONO(oxide-nitride-oxide) structure was used in the Flash EEPROM cell, its data retention characteristics were significanfly degraded because the top oxide of the ONO layer was etched off due to the cleaning process used in the gate oxidation process for the peripheral MOSFETs. When the IPD layer with the ONON(oxide-nitride-oxide-nitride) was used there, however, its data retention characteristics were much improved because the top nitride of the ONON layer protected the top oxide from being etched in the cleaning process. For the modelling of the data retention characteristics of the Flash EEPROM cell with the ONON IPD layer, the decrease of the threshold voltage cue to the charge loss during the bake was here given by the empirical relation ${\Delta}V_t\; = \;{\beta}t^me^{-ea/kT}$ and the values of the ${\beta}$=184.7, m=0.224, Ea=0.31 eV were obtained with the experimental measurements. The activation energy of 0.31eV implies that the decrease of the threshold voltage by the back was dur to the movement of the trapped electrons inside the inter-oxide nitride layer. On the other hand, the results of the computer simulation using the model were found to be well consistent with the results of the electrical measurements when the thermal budget of the bake was not high. However, the latter was larger then the former in the case of the high thermal budger, This seems to be due to the leakage current generated by the extraction of the electrons with the bake which were injected into the inter-oxide niride later and were trapped there during the programming, and played the role to prevent the leakage current. To prevent the generation of the leakage current, it is required that the inter-oxide nitride layer and the top oxide layer be made as thin and as thick as possible, respectively.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.2
• /
• pp.67-73
• /
• 2007

A respiration rate analysed by enzyme kinetics-based respiration model and gas permeability data of LDPE film were applied to design the optical modified atmosphere (MA) packaging condition of persimmon (Diospyros kaki cv. Fuyu) fruits. The fruit quality rapidly decreases due to physiology disorder such as softening and peel blackening. $O_2$ permeance ($Q_{O2}$ in $ml{\cdot}hr^{-1}{\cdot}atm^{-1}{\cdot}m^{-2}$) and $CO_2$ performance ($Q_{CO2}$ in $ml{\cdot}hr^{-1}{\cdot}atm^{-1}{\cdot}m^{-2}$) of low density polyethylene (LDPE) film samples were measured at $0^{\circ}C$ and described as function of thickness (L in ${\mu}m$) as $Q_{O2}=(2540{\times}1/L)-16$, and $Q_{CO2}=(13742{\times}1/L)-70$, respectively. MA package containing single persimmon fruit of 225g was designed and tested experimentally at $0^{\circ}C$ by using LDPE films. Package atmospheres predicted from the relationship of $O_2$, $CO_2$ and $N_2$ balances on the packages was in good agreement with those obtained experimentally. Physiology disorder occurrence was the lowest at 52 ${\mu}m$ package that attained optimum gas condition ($O_2$ 2.8% and $CO_2$ 5.4%). The computer simulation was found to be effective to help to design the optimum MA packaging condition of individual persimmon fruit.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.279-288
• /
• 2001

Jointed rock mass can be analyzed by either continuum model or discontinuum model. Finite element method or finite difference method is mainly used for continuum modelling. Although discontinuum model is very attractive in analyzing the behavior of each block in jointed blocky rock masses, it has shortcomings such that it is difficult to investigate each joint exactly with the present technology and the amount of calculation in computer becomes trio excessive. Moreover, in case of the jointed blocky rock mass which has more than 2 dominant joint sets, it is impossible to model the behavior of each block. Therefore, a model such as ubiquitous joint model theory which assumes the rock mass as a continuum, is required. In the case of tunnels, unlike slopes, it is not easy to obtain safety factor by utilizing analysis method based on limit equilibrium method because it is difficult to assume the shape of failure surface in advance. For this reason, numerical analyses for tunnels have been limited to analyzing stability rather than in calculating the safety factor. In this study, the behavior of a tunnel excavated in jointed rock mass is analyzed numerically by using ubiquitous joint model which can incorporate 2 joint sets and a method to calculate safety factor of the tunnel numerically is presented. To this end, stress reduction technique is adopted.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.10
• /
• pp.520-529
• /
• 2005

A feature-based 3D modeling algorithm is presented in this paper. Since conventional methods use depth-based techniques, they need much time for the image matching to extract depth information. Even feature-based methods have less computation load than that of depth-based ones, the calculation of modeling error about whole pixels within a triangle is needed in feature-based algorithms. It also increase the computation time. Therefore, the proposed algorithm consists of three phases, which are an initial 3D model generation, model evaluation, and model refinement phases, in order to acquire an efficient 3D model. Intensity gradients and incremental Delaunay triangulation are used in the Initial model generation. In this phase, a morphological edge operator is adopted for a fast edge filtering, and the incremental Delaunay triangulation is modified to decrease the computation time by avoiding the calculation errors of whole pixels and selecting a vertex at the near of the centroid within the previous triangle. After the model generation, sparse vertices are matched, then the faces are evaluated with the size, approximation error, and disparity fluctuation of the face in evaluation stage. Thereafter, the faces which have a large error are selectively refined into smaller faces. Experimental results showed that the proposed algorithm could acquire an adaptive model with less modeling errors for both smooth and abrupt areas and could remarkably reduce the model acquisition time.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.192-200
• /
• 2008

Multimodal biometrics is a method for personal authentication and verification using more than two types of biometrics data. RBF based score-level fusion uses pattern recognition algorithm for multimodal biometrics, seeking the optimal decision boundary to classify score feature vectors each of which consists of matching scores obtained from several unimodal biometrics system for each sample. In this case, all matching scores are assumed to have the same reliability. However, in recent research it is reported that the quality of input sample affects the result of biometrics. Currently the matching scores having low reliability caused by low quality of samples are not currently considered for pattern recognition modelling in multimodal biometrics. To solve this problem, in this paper, we proposed the RBF based score-level fusion approach which employs quality information of input biometrics data to adjust decision boundary. As a result the proposed method with Qualify information showed better recognition performance than both the unimodal biometrics and the usual RBF based score-level fusion without using quality information.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.31-39
• /
• 2006

The visibility graph is a well-known method for efficient path-finding with the minimum search space modelling the game world. The generalized visibility graph is constructed on the expanded obstacle boundaries to eliminate the "wall-hugging" problem which is a major disadvantage of using the visibility graph. The paths generated by the generalized visibility graph are guaranteed to be near optimal and natural-looking. In this paper we propose the method to apply the generalized visibility graph efficiently for game characters who moves among static obstacles between varying start and goal points. Even though the space is minimal once the generalized visibility graph is constructed, the construction itself is time-consuming in checking the intersection between every two links connecting nodes. The idea is that we build the map for static obstacles first and then incorporate start and goal nodes quickly. The incorporation of start and goal nodes is the part that must be executed repeatedly. Therefore we propose to use the rotational plane-sweep algorithm in the computational geometry for incorporating start and goal nodes efficiently. The simulation result shows that the execution time has been improved by 39%-68% according to running times in the game environment with multiple static obstacles.

• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.589-603
• /
• 2014

Expressions for determining the value of the impact force as reported in the literature and incorporated into code provisions are essentially quasi-static forces for emulating deflection. Quasi-static forces are not to be confused with contact force which is generated in the vicinity of the point of contact between the impactor and target, and contact force is responsible for damage featuring perforation and denting. The distinction between the two types of forces in the context of impact actions is not widely understood and few guidelines have been developed for their estimation. The value of the contact force can be many times higher than that of the quasi-static force and lasts for a matter of a few milli-seconds whereas the deflection of the target can evolve over a much longer time span. The stiffer the impactor the shorter the period of time to deliver the impulsive action onto the target and consequently the higher the peak value of the contact force. This phenomenon is not taken into account by any contemporary codified method of modelling impact actions which are mostly based on the considerations of momentum and energy principles. Computer software such as LS-DYNA has the capability of predicting contact force but the dynamic stiffness parameters of the impactor material which is required for input into the program has not been documented for debris materials. The alternative, direct, approach for an accurate evaluation of the damage potential of an impact scenario is by physical experimentation. However, it can be difficult to extrapolate observations from laboratory testings to behaviour in real scenarios when the underlying principles have not been established. Contact force is also difficult to measure. Thus, the amount of useful information that can be retrieved from isolated impact experiments to guide design and to quantify risk is very limited. In this paper, practical methods for estimating the amount of contact force that can be generated by the impact of a fallen debris object are introduced along with the governing principles. An experimental-calibration procedure forming part of the assessment procedure has also been verified.

• Ecology and Resilient Infrastructure
• /
• v.6 no.2
• /
• pp.89-100
• /
• 2019

We've reviewed existing studies on the interactions among vegetation, hydrology, and geomorphology in the stream corridors, adding one more factor of vegetation in the traditional area of hydro-geomorphology. Understanding of the interactions among those three factors is important not only academically but also practically since it is related intimately to the restoration of river corridor as well as management itself. Studies of this area started from field investigations in the latter part of the 20th century and focused on the flume experiments and then computer modelling in the 1990s and 2000s. Now, it has turned again to the field investigations of specific phenomena of the vegetative-hydrologic-geomorphologic interactions in detailed micro scales. Relevant studies in Korea, however, seem to be uncommon and far behind the international status quo in spite that practically important issues related directly to this topic have been emerged. In this study, we propose, based on the extensive literature review and authors' own knowledge and experiences, a conceptual diagram expressing the interactions among vegetation, flow (water), sediment, and geomorphology. Existing relevant studies in Korea since the 1990s are classified according to the categorization in the proposed diagrams and then briefly reviewed. Finally, considering the practical issues of riparian vegetation that have emerged recently in Korea, we propose areas of investigation needed in near future such as, among others, long-term and systematic field investigations and monitoring at multiple river corridors having different attributes on vegetative-hydrologic-geomorphologic interactions, including vegetative dynamics for succession.