• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.124-131
• /
• 2009

A reliable detection of regions in radiography is one of the most important task before the evaluation of defects on welded joints. The extracted features is to be classified into distinctive clusters for each segmented region. But conventional segmentation techniques give unsatisfactory results for this task due to the spatial superposition of intensity and low signal-to-ratio(SNR) in radiographic images. The usage of global or local processes not only provide the necessary noise resistance but also fail in classification of regions. In this paper, we presents an appropriate approach for segmentation of region-based indications in industrial Computed Radiography(CR) images. The geometric differences between welded and non-welded area which is generated on radiography as the representative regions(background, thickness, middle and welded region in steel tube image) have constructed the hierarchical structure. Although this structure is contaminated by noise, the scheme between regions can be selected by the help of local clustering based on distinctive geometric property of each region. Because of the geometric nature of the considered region and so that the region is selected layer by layer, and that the real class represents the boundary between regions, the vertical and horizontal clustering process in each layer must be judicious. In order to show the effectiveness of this approach, a comparative experiment of various segmentation method is performed on industrial steel tube CR images.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.138-145
• /
• 2007

Wireless transmission system using the multipath channel is affected ISI due to the delay spread. So we use a decision feedback equalizer which consist of decision part and feedback filter for remove the ISI effectively. In this paper, we propose a improved adaptive decision feedback equalizer to mitigate ISI effectively. The proposed adaptive decision feedback equalizer is construct by using soft decision device and hierarchical feedback filter based on MMSE sub-optimal equalizer using the LMS algorithm. Soft decision device mitigate the error propagation in feedback filter by incorrectly detected decision symbol and feedback filter which is divided two step independently mitigate the ISI by using a adaptive algorithm. As a result this structure shows better performance than conventional decision feedback equalizer by mitigating the error propagation in filter cause incorrectly detecting symbol. and we get the MSE more rapidly by using larger step-size due to reduce the number of feedback filter tap. In computer simulation, we compare the bit error rate performance of proposed decision feedback equalizer with conventional one on the S-V channel model for UWB system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.51-59
• /
• 2008

Incontinence is the urination disorder as the leakage of urine without her own volition and the woman's representative disease which reduce the life quality. The electromagnetic therapy has high possibility of development cause it has no needs of operant exercise, no arousing of shame and impossibility of infection. But, it has improvement points such as uniformity of the treatment protocol, patient dependance and absent of patient monitoring system. With these demands, the system which stimulate the pelvic flaw muscle with electromagnetic and monitoring the patient status during the therapy is proposed, in this study. And individually adapted electromagnetic therapy system for incontinence patient is also suggested. The proposed system consisted of electromagnetic generation device, cooling device, treating chair, patient monitoring device with pulsation and control software. The simulation for high power system and evaluation confirm was performed. With the development of control software, the convenience of using and maintenance are ensured and the patient adapted therapy protocol is applied. The developed patient adapted electromagnetic therapy system with monitoring device is regarded as the patient affinitive treating method by reducing the riskiness, improving the efficiency with patterned protocol and pre/post therapy. These results, in this study, can bring the safe and organized treatment method to incontinence patients and can lead the variable study for electromagnetic therapy in incontinence.

• Journal of Korean Academy of Nursing
• /
• v.26 no.3
• /
• pp.576-590
• /
• 1996

Advanced countries such as the USA and Japan are eagerly seeking ways to improve health and welfare of the elderly. One of the services is home health care service using the telephone. Various types of services using the telephone have been developed, improved and are being utilized ranging from the basic consulting to emergency response systems in the area of health care for the elderly. A demonstration project was launched to study the feasibility of a consulting system and telemedicine for the elderly using the public phone system in Korea. For this project, a gathering site for the elderly was selected and those who visited this place were interviewed to find out what kinds of services they wanted and what kind of system they needed to provide the required services. Based on the users' requests and the surrounding environment, a telephone consulting facility was established at the Research Institute of Nursing Science at Seoul National University and consulting personnel was recruited, trained and posted at the center. An Application program for home health care nurses to use when they visited the patients at their homes was developed. This system operates on a notebook Computer and allows nurses to communicate with a doctor at a local hospital through a modem and telecommunication line. These systems were implemented for three months and problems which developed during operation of the systems were identified and progressively modified. Through system evaluation, it was found that a consulting system using phone service will be an invaluable system for the welfare of the elderly in the future. But in order to meet the elderly's need, more services than mere consultation are needed. That is, communication with physicians and hospitals are needed. Thus, when there is any need for physicians' attention, physicians or hospitals should be contacted directly. Similarly for telemedicine, when the home health care nurse visits elderly patients she can assess the patient's problem and provide nursing care, access a physician or hospital to refer her patient to or consult directly using the telecommunication the system. The above mentioned system is a basic form of futuristic telemedicine for the elderly and those who have chronic disease problems. This kind of system will be of great value when it is used on the national information super-highways in the future. In order to get to that stage, of course, this project needs great improvement in the technical, academic, and legal aspects.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.434-441
• /
• 2006

Objective: While one of the most prevailing motivations for seeking orthodontic treatment is to achieve good facial esthetics, understanding the level of a person's perception to the changes that have occurred on the face after orthodontic treatment is critical to the process of orthodontic diagnosis and treatment planning. Methods: 40 students attending art school participated in determining the level of their perception of changed lip position and facial asymmetry. Computer-graphic frontal face and facial profile photographs with balanced proportions were used to evaluate the level of a participant's perception of the changes in facia! asymmetry and in lip position. Results: Change of lip position over 2 mm and over a 3 mm change of facial asymmetry was perceived significantly. Conclusion: The results indicated that at least a 2 mm change of lip position was needed to be perceived after orthodontic treatment. The level of perception of the change in facial asymmetry was lower than that of the change in lip position. Information about facial changes given prior to the evaluation enhanced the level of perception.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.113-119
• /
• 2003

Purpose : To evaluate the relationship between morphometric analysis of bone microstructure from digital radiographic image and trabecular bone strength. Materials and Methods : One hundred eleven bone specimens with 5 mm thickness were obtained from the mandibles of 5 pigs. Digital images of specimens were taken using a direct digital intraoral radiographic system. After selection of ROI (100 × 100 pixel) within the trabecular bone, mean gray level and standard deviation were obtained. Fractal dimension and the variants of morphometric analysis (trabecular area, periphery, length of skeletonized trabeculae, number of terminal point, number of branch point) were obtained from ROI. Punch sheer strength analysis was performed using Instron (model 4465, Instron Corp., USA). The loading force (loading speed 1 mm/min) was applied to ROI of bone specimen by a 2 mm diameter punch. Stress-deformation curve was obtained from the punch sheer strength analysis and maximum stress, yield stress, Young's modulus were measured. Results: Maximum stress had a negative linear correlation with mean gray level and fractal dimension significantly (p<0.05). Yield stress had a negative linear correlation with mean gray level, periphery, fractal dimension and the length of skeletonized trabeculae significantly (p < 0.05). Young's modulus had a negative linear correlation with mean gray level and fractal dimension significantly (p < 0.05). Conclusions : The strength of cancellous bone exhibited a significantly linear relationship between mean gray level, fractal dimension and morphometric analysis. The methods described above can be easily used to evaluate bone quality clinically.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.45-50
• /
• 2020

In this paper, we propose a QoS-based handover management scheme in SDN. Even though there have been lots of recent services such as IoT, the conventional networks provide a monolitic handover method without considerations on flow-specific QoS features. For example, the conventional Internet provides a handover method which only considers IP continuity. On the other hand, 4G and 5G networks use a strict handover method for all kinds of flows with resource reservations. This means that it is difficult to guarantee the QoS requirements for the flow with a strict QoS requirement in Internet and the inefficient resource utilization can occur in the 4G and 5G because of the strict QoS-based handover management. The proposed scheme proposes the flow handover management scheme based on QoS requirements according to the SDN controller's management. From the network operators' perspective, the proposed scheme can provide the efficient resource utilization as well as QoS provisioning.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.11
• /
• pp.369-382
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(quality of service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to activate only the minimum number of servers needed to handle current user requests. Previous studies on energy aware server cluster put efforts to reduce power consumption or heat dissipation, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management method to improve not only performance per watt but also QoS of the existing server power mode control method based on autonomous learning. Our proposed method is to adjust server power mode based on a hybrid approach of autonomous learning method with multi level thresholds and power consumption prediction method. Autonomous learning method with multi level thresholds is applied under normal load situation whereas power consumption prediction method is applied under abnormal load situation. The decision on whether current load is normal or abnormal depends on the ratio of the number of current user requests over the average number of user requests during recent past few minutes. Also, a dynamic shutdown method is additionally applied to shorten the time delay to make servers off. We performed experiments with a cluster of 16 servers using three different kinds of load patterns. The multi-threshold based learning method with prediction and dynamic shutdown shows the best result in terms of normalized QoS and performance per watt (valid responses). For banking load pattern, real load pattern, and virtual load pattern, the numbers of good response per watt in the proposed method increase by 1.66%, 2.9% and 3.84%, respectively, whereas QoS in the proposed method increase by 0.45%, 1.33% and 8.82%, respectively, compared to those in the existing autonomous learning method with single level threshold.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.9
• /
• pp.279-292
• /
• 2014

Energy aware server cluster aims to reduce power consumption at maximum while keeping QoS(quality of service) as much as energy non-aware server cluster. In the existing methods of energy aware server cluster, they calculate the minimum number of active servers needed to handle current user requests and control server power mode in a fixed time interval to make only the needed servers ON. When loads change rapidly, QoS of the existing methods become degraded because they cannot increase the number of active servers so quickly. To solve this QoS problem, we classify load change situations into five types of rapid growth, growth, normal, decline, and rapid decline, and apply five different thresholds respectively in calculating the number of active servers. Also, we use a flexible scheme to adjust the above classification criterion for multi threshold, considering not only load change but also the remaining capacity of servers to handle user requests. We performed experiments with a cluster of 15 servers. A special benchmarking tool called SPECweb was used to generate load patterns with rapid change. Experimental results showed that QoS of the proposed method is improved up to the level of energy non-aware server cluster and power consumption is reduced up to about 50 percent, depending on the load pattern.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.121-134
• /
• 2017

With rapid increasing the development and use of IoT Devices, requirements for safe IoT devices and services such as reliability, security are also increasing. In Security engineering, SDLC (Secure Development Life Cycle) is applied to make the trustworthy system. Secure Development Life Cycle has 4 big steps, Security requirements, Design, Implementation and Operation and each step has own goals and activities. Deriving security requirements, the first step of SDLC, must be accurate and objective because it affect the rest of the SDLC. For accurate and objective security requirements, Threat modeling is used. And the results of the threat modeling can satisfy the completeness of scope of analysis and the traceability of threats. In many countries, academic and IT company, a lot of researches about drawing security requirements systematically are being done. But in domestic, awareness and researches about deriving security requirements systematically are lacking. So in this paper, I described about method and process to drawing security requirements systematically by using threat modeling including DFD, STRIDE, Attack Library and Attack Tree. And also security requirements are described via Common Criteria for delivering objective meaning and broad use of them.