• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.70-78
• /
• 2000

In applying high-${\underline{T_c}}$ superconducting material to microwave devices, Uncertainty of electromagnetics of high-${\underline{T_c}}$ superconductor(HTS) and the temperature dependence of the substrate fits with HTS thin film cause difficulty in realization of such antenna for industrial applications. It must be noted to characteristic the HTS antenna in contrast with normal conducting counterpart for this real application. In this paper, a comparative study between HTS microstrip antennas and gold antennas was reported in terms of the return loss, the characteristic impedance, efficiency, and other various characteristics. HTS thin films were $YBa_2Cu_3O_{7-x}$ (YBCO) on MgO substrates. Superconducting microstrip antennas used in this work were to directly inset a microstrip transmission line into the 50 ${\Omega}$ region of the radiating patch. Measurement results of HTS antennas and gold antennas showed that usable antennas can be made using this architecture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.39-44
• /
• 2011

This purpose of this study is to propose the characteristics analysis of the PCB pattern designed two modes for the output voltage value on the PMIC through converting the limited voltage value inputted from a battery. The PCB design technology has been undergoing difficulty in getting the related technology in a domestic market because of increasing EMI/EMC, Cross-talk, Impedance. And it requires to have the appropriate clearance between the patterns and the technology of PCB pattern width with a amperage according to various uses. The study carried out the characteristics analysis of the PCB pattern designed from a direct output method without a capacitor[mode1], to an output method through a capacitor[mode2] for PMIC output voltage value. Besides, we calculated the pattern width with a amperage using the equation suggested by IPC-2221, presenting the right way of the layout design to analyze the trouble with the test. Therefore, this study is expected to contribute not only to applying the PMIC design for the mobile panel power supply, but also helping the design and application technology in various areas such as car control, camera, note-book, computer, PDA, etc.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.9-16
• /
• 2008

For the efficient routing on a Sensor Network, one may consider a deployment problem to interconnect the sensor nodes optimally. There is an analogous theoretic problem: the Steiner Tree problem of finding the tree that interconnects given points on a plane optimally. One may use the approximation algorithm for the problem to find out the deployment that interconnects the sensor nodes almost optimally. However, the Steiner Tree problem is to interconnect mathematical set of points on a Euclidean plane, and so involves particular cases that do not occur on Sensor Networks. Thus the approach of using the algorithm does not make a proper way of analysis. Differently from the randomly given locations of mathematical points on a Euclidean plane, the locations of sensors on Sensor Networks are assumed to be physically dispersed over some moderate distance with each other. By designing an approximation algorithm for the Sensor Networks in terms of that physical property, one may produce the execution time and the approximation ratio to the optimality that are appropriate for the problem of interconnecting Sensor Networks.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.39-45
• /
• 2017

Image compression is now essential for applications such as transmission and storage in data bases. For video and digital image applications the use of long tap filters, while not providing any significant coding gain, may increase the hardware complexity. We use a wavelet transform in order to obtain a set of bi-orthogonal sub-classes of images; First, the design of short kernel symmetric analysis is presented in 1-dimensional case. Second, the original image is decomposed at different scales using a subband filter banks. Third, this paper is presented a technique for obtaining 2-dimensional bi-orthogonal filters using McClellan transform. It is shown that suggested wavelet bases is well used on wavelet transform for image compression. From performance comparison of bi-orthogonal filter, we actually use filters close to ortho-normal filters on application of wavelet bases to image analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.455-461
• /
• 2020

Electronic payment system using Internet banking is a very important application for users of e-commerce environment. With rapidly growing use of fintech applications, the risk and damage caused by malicious hacking or identity theft are getting significant. To prevent the damage, fraud detection system (FDS) calculates the risk of the electronic payment transactions using user profiles including types of goods, device status, user location, and so on. In this paper, we propose a new risk calculation method using relative location of users such as SSID of wireless LAN AP and MAC address. Those relative location information are more difficult to imitate or copy compared with conventional physical location information like nation, GPS coordinates, or IP address. The new method using relative location and cumulative user characteristics will enable stronger risk calculation function to FDS and thus give enhanced security to electronic payment systems.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.26-34
• /
• 2018

In this paper, we propose a scheduling scheme that can efficiently serve I/O requests having deadlines in flash storage. The I/O requests with deadlines, namely, real-time requests, are assumed to be issued for streaming services of continuous media. Since a Web-based streaming server commonly supports downloads of HTMLs or images, we also aim to quickly process non-real-time I/O requests, together with real-time ones. For this purpose, we adopt the well-known rate-reservation EDF (RR-EDF) algorithm for determining scheduling priorities among mixed I/O requests. In fact, for the use of an EDF-style algorithm, overhead of task's switching should be low and predictable, as with its application of CPU scheduling. In other words, the EDF algorithm is inherently unsuitable for scheduling I/O requests in HDD storage because of highly varying latency times of HDD. Unlike HDD, time for reading a block in flash storage is almost uniform with respect to its physical location. This is because flash storage has no mechanical component, differently from HDD. By capitalizing on this uniform block read time, we compute bandwidth utilization rates of real-time requests from streams. Then, the RR-EDF algorithm is applied for determining how much storage bandwidth can be assigned to non-real-time requests, while meeting deadlines of real-time requests. From this, we can improve the service times of non-real-time requests, which are issued for downloads of static files. Because the proposed scheme can expand flexibly the scheduling periods of streams, it can provide a full usage of slack times, thereby improving the overall throughput of flash storage significantly.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.43-52
• /
• 2014

In weapon systems development, live fire tests have been frequently adopted to evaluate the performance of the systems under development. Therefore, it is necessary to ensure safety in the test ranges where the live fire tests can cause serious hazards. During the tests, a special care must be taken to protect the test and evaluation (T&E) personnel and also test assets from potential danger and hazards. Thus, the development and management of the range safety process is quite important in the tests of guided missiles and artillery considering the explosive power of the destruction. Note also that with a newly evolving era of weapon systems such as laser, EMP and non-lethal weapons, the test procedure for such systems is very complex. Therefore, keeping the safety level in the test ranges is getting more difficult due to the increased unpredictability for unknown hazards. The objective of this paper is to study on how to enhance the safety in the test ranges. To do so, an approach is proposed based on model-based systems engineering (MBSE). Specifically, a functional architecture is derived utilizing the MBSE method for the design of the range safety process under the condition that the derived architecture must satisfy both the complex test situation and the safety requirements. The architecture developed in the paper has also been investigated by simulation using a computer-aided systems engineering tool. The systematic application of this study in weapon live tests is expected to reduce unexpected hazards and test design time. Our approach is intended to be a trial to get closer to the recent theme in T&E community, "Testing at the speed of stakeholder's need and rapid requirement for rapid acquisition."

• Journal of Digital Contents Society
• /
• v.4 no.2
• /
• pp.233-242
• /
• 2003

A TTS(Text-To-Speech) System is a computer-based system that should be able to read any text aloud. To output a natural voice, we need a general knowledge of language, a lot of time, and effort. Furthermore, the sound pattern of english has a variable pattern, which consists of phonemic and morphological analysis. It is very difficult to maintain consistency of pattern. To handle these problems, we present a system based on phonemic analysis for vowel and consonant. By analyzing phonological variations frequently found in spoken english, we have derived about phonemic contexts that would trigger the multilevel application of the corresponding phonological process, which consists of phonemic and allophonic rules. In conclusion, we have a rule data which consists of phoneme, and a engine which economize in system. The proposed system can use not only communication system, but also utilize office automation and so on.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.111-119
• /
• 2010

Many researchers have studied on the optimal seismic design with the development of the computer. So far the application structure of most researches on the optimal seismic design was almost the moment resisting frame. Because the braced frames are the representative lateral load resisting system with the moment resisting frames, it is estimated that the effect on the practice will be great if it can is provided a design guideline through the development of optimal seismic design model for the braced frames. The purpose of this study is to propose the optimal seismic design model for the inverted V-type special concentrically braced frames considering the buckling of braces. The objective functions of this are to minimize the structural weight and maximize the total dissipated energy of the structure and the constraints of this are the strength conditions for the column, beam, brace and inter-story drifts condition. To verify the proposed model, it is applied to 2D steel concentrically braced frames of 3-story and 9-story.

• Phonetics and Speech Sciences
• /
• v.7 no.3
• /
• pp.139-149
• /
• 2015

This paper aims to analyze pronunciation variations of loanwords produced by Korean and improve the performance of pronunciation modeling of loanwords in Korean by using syllable-based segmentation and phonological knowledge. The loanword text corpus used for our experiment consists of 14.5k words extracted from the frequently used words in set-top box, music, and point-of-interest (POI) domains. At first, pronunciations of loanwords in Korean are obtained by manual transcriptions, which are used as target pronunciations. The target pronunciations are compared with the standard pronunciation using confusion matrices for analysis of pronunciation variation patterns of loanwords. Based on the confusion matrices, three salient pronunciation variations of loanwords are identified such as tensification of fricative [s] and derounding of rounded vowel [ɥi] and [$w{\varepsilon}$]. In addition, a syllable-based segmentation method considering phonological knowledge is proposed for loanword pronunciation modeling. Performance of the baseline and the proposed method is measured using phone error rate (PER)/word error rate (WER) and F-score at various context spans. Experimental results show that the proposed method outperforms the baseline. We also observe that performance degrades when training and test sets come from different domains, which implies that loanword pronunciations are influenced by data domains. It is noteworthy that pronunciation modeling for loanwords is enhanced by reflecting phonological knowledge. The loanword pronunciation modeling in Korean proposed in this paper can be used for automatic speech recognition of application interface such as navigation systems and set-top boxes and for computer-assisted pronunciation training for Korean learners of English.