• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.413-421
• /
• 2017

Mammography, the basic test for finding and treating increased breast cancer, gives the anxiety of cancer and radiation exposure to most women. In addition, it gave very severe compression pain, so we studied the degree of pain and tried to reduce the pain. The purpose of this study is to compare and analyze the modified imaging technique and the basic imaging technique based on clinical experience, respectively. The subjects of this study were 160 women from 30 to 60 years old who visited to Seoul Boramae Hospital operated by Seoul National University Hospital from February to March 2017 for breast screening. Modified 80 persons and 80 persons were divided into two groups, and each group was asked to fill out questionnaires sequentially without knowing the subjects. The first method is a modified method in which an automatic pedal is divided into four or more presses, a manual pressure is used together, and an attitude is described in detail. Secondly, we used only the automatic pedal compression method and press it within 1-3 times. In the mean of the pain distribution, the experimental group (modified method) was 2.49 and the control group (basic method) had an average of 4.86, which showed 48.8% less pain. In this modified method, the pain scores of the experimental group were lower than those of the control group, and the degree of the pain was statistically significant.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.53-60
• /
• 2007

L/EPS, manufactured in the shape of block and used for civil engineering, is a lightweight material with an excellent resistance to compression, and provides a superb self-sufficient stability. EPS is a suitable material capable of resolving the problem of settlement and lateral flow if it is applied as the soil on soft ground. The Korean Standards (KS) has not yet proposed any testing method for use of EPS as an engineering banking material. Only its testing and quality ordinance as a heat insulation material has been standardized. The design criteria for EPS has been established and applied through the trial construction of KHC (Korea Highway Corporation) and quality test of manufacturer, but most studies on them have been confined to factory products. This study is focused on comparing and analyzing long-term durability by conducting cyclic load test, freezing and thawing test, absorption rate test and others. EPS used in the test was chosen from construction sites and factory products, focusing on the long-term durability of EPS depending on the passage of time. Unconfined compression test results indicated that the strength of collected samples was lower than factory products. While the triaxial compression test results indicated that the shear strength increased in proportion to the increase of confining pressure, and factory products had declining shear strength as the confining pressure rose.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.46-54
• /
• 2011

In this paper, we propose a low-complexity loop filtering method depending on transform-block regions. Block adaptive loop filter (BALF) was developed to improve about 10% in compression performance for the next generation video coding. The BALF employs the Wiener filter that makes reconstructed frames close to the original ones and transmits filter-related information. However, the BALF requires high computational complexity, while it can achieve high compression performance because the block adaptive loop filter is applied to all the pixels in blocks. The proposed method is a new loop filter that classifies pixels in a block into inner and boundary regions based on the characteristics of the integer transform and derives optimum filters for each region. Then, it applies the selected filters for the inner and/or boundary regions. The decoder complexity can be adjusted by selecting region-dependent filter to be used in the decoder side. We found that the proposed algorithm can reduce 35.5% of computational complexity with 2.56% of compression loss, in case that only boundary filter is used.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.3
• /
• pp.131-135
• /
• 2008

Objective : Hemifacial spasm (HFS) is considered as a reversible pathophysiological condition mainly induced by continuous vascular compression of the facial nerve root exit zone (REZ) at the cerebellopontine angle. As an offending vessel, vertebrobasilar artery tends to compress much more heavily than others. The authors analyzed HFS caused by vertebrobasilar artery and described the relationships between microsurgical findings and clinical courses. Methods : Out of 1,798 cases treated with microvascular decompression (MVD) from Jan. 1980 to Dec. 2004. the causative vessels were either vertebral artery or basilar artery in 87 patients. Seventy-nine patients were enrolled in this study. Preoperatively, computed tomography (CT) or brain magnetic resonance (MR) imaging with 3-dimentional short range MR technique was performed and CT was checked immediately or 2-3 days after anesthetic recovery. The authors retrospectively analyzed the clinical features. the compression patterns of the vessels at the time of surgery and treatment outcomes. Results : There were 47 were male and 32 female patients. HFS developed on the left side in 52 cases and on the right side in 27. The mean age of onset was 52.3 years (range 19-60) and the mean duration of symptoms was 10.7 years. Many patients (39 cases; 49.1%) had past history of hypertension. HFS caused only by the vertebral artery was 8 cases although most of the other cases were caused by vertebral artery (VA) in combination with its branching arteries. Most frequently, the VA and the posterior inferior cerebellar artery (PICA) were the simultaneous causative blood vessels comprising 32 cases (40.5%). and in 27 cases (34.2 %) the VA and the anterior inferior cerebellar artery (AICA) were the offenders. Facial symptoms disappeared in 61 cases (77.2%) immediately after the operation and 68 cases (86.1%) showed good outcome after 6 months. Surgical outcome just after the operation was poor in whom the perforators arose from the offending vessels concurrently (p<0.05). Conclusion : In case where the vertebral artery is a cause of HFS, commonly branching arteries associated with main arterial compression on facial REZ requires more definite treatment for proper decompression because of its relatively poor results compared to the condition caused by other vascular compressive origins.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.820-823
• /
• 2013

Recently, the need for improving image quality of the image is increasing in various fields smartphones, cameras, and portable devices. How a significant impact on improving image quality of the image is a contrast enhancement, as a representative method to improve the contrast, the process of histogram equalization, various studies have been made. However, the method of histogram equalization general, by readjusting the only brightness, when the image histogram is biased to one side, due to changes in the excess brightness, distortions such as blocking phenomenon occurs. In this paper, we provide a contrast enhancement techniques through the compression and re-distribution of a well-balanced average brightness of the histogram distribution. By be differential compression histogram based on the histogram frequency in order to suppress the supersaturation phenomenon due to the increase in contrast ratio excessive repositioning well-balanced histogram lopsided, the proposed method, the balance of the brightness of the image I want to to take. The experimental results, the image brightness is balanced manner compared to conventional methods, the proposed method showed a good effect to improve the contrast without supersaturation phenomenon as compared with the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.233-242
• /
• 2009

This paper intend to show the affect of the intra-prediction on the typical digital watermarking method and the fact that the watermarking method has very low effectiveness when it is performed for the intra-frames of H.264. The target watermarking method was the one for imperceptibility and robustness and was assumed to be performed during the intra-compression process by the H.264 technique. Also this method was assumed to insert watermark data and to extract it for certification if needed. The problem is that the resulting data from the re-engineering of the watermark insertion process to extract the watermark data is different from the one before. We experimentally showed that it stems from the intra-prediction itself. That is, we showed that the resulting image data from only compression without watermarking changes if it is re-compressed by the same conditions as the first compression and it is because the intra-prediction modes as well as the coefficient values change. Also, we applied one blind and one semi-blind watermarking methods to show that the typical attacks after watermarking makes this problem much more serious and lowers the effectiveness of the watermarking method dramatically. Therefore we concluded by considering the experimental data that a typical watermarking method which has been researched so far cannot guarantee the effectiveness of intra-frame watermarking and it is highly required to developed a new kind of methodologies.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.359-366
• /
• 2022

In this paper, the effect of compression levels on the strengths of porous concrete using bottom ash aggregates was analyzed. Coal bottom ash (CBA) was used as aggregate in porous concrete in this study. The aggregate size types used in the CBA concrete mixtures were catagorized into two different ones. One included only a single aggregate particle size and the other included hybrid aggregate particles mixed at a ratio of 8:2 volume proportion. The water-binder ratio was fixed at 0.30, and the compression levels were applied at 0.5, 1.5, and 3.0 MPa valu es to fabricate a porou s concrete specimen. The total porosity, compressive, splitting tensile, and flexural tensile strengths were tested and analyzed. When the compression level increased, the total porosity decreased, meanwhile the compressive, split tensile, and flexural tensile strengths increased. The total porosity of concrete using hybrid aggregate was lower and the strength was larger than those of concrete using single-type aggregate. Finally, the correlation between the total porosity, compressive, split tensile, and flexural tensile strengths of porous concrete were presented. The total porosity and strength characteristics showed an inversely proportional correlation.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.29-41
• /
• 2022

Recently, with the development of deep learning technology, a variety of huge models with excellent performance have been devised by pre-training massive amounts of text data. However, in order for such a model to be applied to real-life services, the inference speed must be fast and the amount of computation must be low, so the technology for model compression is attracting attention. Knowledge distillation, a representative model compression, is attracting attention as it can be used in a variety of ways as a method of transferring the knowledge already learned by the teacher model to a relatively small-sized student model. However, knowledge distillation has a limitation in that it is difficult to solve problems with low similarity to previously learned data because only knowledge necessary for solving a given problem is learned in a teacher model and knowledge distillation to a student model is performed from the same point of view. Therefore, we propose a heterogeneous knowledge distillation method in which the teacher model learns a higher-level concept rather than the knowledge required for the task that the student model needs to solve, and the teacher model distills this knowledge to the student model. In addition, through classification experiments on about 18,000 documents, we confirmed that the heterogeneous knowledge distillation method showed superior performance in all aspects of learning efficiency and accuracy compared to the traditional knowledge distillation.