• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.643-657
• /
• 2020

This study presents experimental and numerical investigations on circular steel tube confined ultra high performance concrete (UHPC) columns under axial compression. The plain UHPC without fibers was designed to achieve a compressive strength ranged between 150 MPa and 200 MPa. Test results revealed that loading on only the UHPC core can generate a significant confinement effect for the UHPC core, thus leading to an increase in both strength and ductility of columns, and restricting the inherent brittleness of unconfined UHPC. All tested columns failed by shear plane failure of the UHPC core, this causes a softening stage in the axial load versus axial strain curves. In addition, an increase in the steel tube thickness or the confinement index was found to increase the strength and ductility enhancement and to reduce the magnitude of the loss of load capacity. Besides, steel tube with higher yield strength can improve the post-peak behavior. Based on the test results, the load contribution of the steel tube and the concrete core to the total load was examined. It was found that no significant confinement effect can be developed before the peak load, while the ductility of post-peak stage is mainly affected by the degree of the confinement effect. A finite element model (FEM) was also constructed in ABAQUS software to validate the test results. The effect of bond strength between the steel tube and the UHPC core was also investigated through the change of friction coefficient in FEM. Furthermore, the mechanism of circular steel tube confined UHPC columns was examined using the established FEM. Based on the results of FEM, the confining pressures along the height of each modeled column were shown. Furthermore, the interaction between the steel tube and the UHPC core was displayed through the slip length and shear stresses between two surfaces of two materials.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.23-30
• /
• 1985

Keloids are abnormally healed skin wounds that develop in the subpapillary layer of the dermis. They are a lesion with wide, raised and deep scars. They exceed the original dimensions of the wound and grow mounds upon mounds of collagen in a pseudotumor fashion. Their treatment may take several forms such as surgery, intralesional injection of steroid, compression, superficial irradiation, and combination therapy. However, absolute method is nothing until now. Recently, the cryosurgery shows relatively good effect in treatment, so we tried the clinical experience with cryosurgery in the treatment of keloids. Material and methods: During the past 2 years, we treated 20 individuals of the keloids with severe itching and pain. The age ranged from 5 to 45 years old. Only 6 cases were biopsied before and after cryotherapy. The cryosurgery set we used was Toitu model CR 201 $N_2O$ gas (tip temperature is $-80^{\circ}C$) and was applied directly on the lesion about 4 to 5 minutes with slight compression. After cryosurgery in keloids, the following results were obtained: 1. It is both quick and easy method. 2. It causes little or no pain and no loss of blood. 3. Integumentary normalization is rapid. The new scar tissue is smaller, and more elastic and soft. 4. The pain, itching and paresthesia commonly associated with keloid is usually disappeared. 5. Other treatment can be used after cryosurgery. 6. Histologic picture after cryosurgery is similar with the result of steroid injection. 7. The mechanism of the cryosurgery in keloids is the result of the direct tissue destroying action and cryoimmunologic reaction.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.87-88
• /
• 2012

Because intra prediction modes in H.264 are determined by the brightness continuity between neighboring blocks, they can be used as a method for extracting edge information in the compression domain. However, if we just consider 9 intra prediction modes in H.264 as 9 different edge directions, we have the following two problems. First, intra prediction modes tend to yield too many edge blocks, generating unnecessary edge information. Second, we may not need all 9 directional edges (including the DC type) in H.264 intra prediction modes. For example, the EHD (edge histogram descriptor) in MPEG-7 defines only 4 directional edge types, namely horizontal, vertical, diagonal (HVD) edges with $0^{\circ}$, $90^{\circ}$, $45^{\circ}$, and $135^{\circ}$. Here, semi-diagonal (SD) edge types with $112.5^{\circ}$, $157.5^{\circ}$, $22.5^{\circ}$, and $67.5^{\circ}$ in the intra prediction modes in H.264 are not used. In this paper. we prepose a method that removes unnecessary edges from the intra prediction modes by utilizing the total average coefficient of 4x4 blocks in each slice and assign SD edges to HVD (horizontal, vertical, diagonal, $0^{\circ}$, $90^{\circ}$, $45^{\circ}$, $135^{\circ}$) edges by the contextual information of the neighboring blocks. Experimental results show that the edges determined by the proposed method in the compression domain are comparable to those of the previous edge detection methods in the spatial domain.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.9-16
• /
• 2002

As existing analog video surveillance systems could save and retrieve data only in a limited space within short distance, it had many constraints in developing into various application systems. However, on the back of development of the Internet and computer technologies, digital video surveillance systems can be controlled from a remote location by web browser without space limits. Moreover, data compression and management technologies with Index Search algorithm make it possible to efficiently handling, storing, and retrieving a large amount of data and further motion detection algorithm enhances a recording speed and efficiency for a practical application, that is, a practical remote recordable video surveillance system using our efficient algorithms as mentioned, called WebCam. The WebCam server system can intelligently record and save video images digitized through efficient database management, monitor and control cameras in a remote place through user authentication, and search logs.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.147-151
• /
• 2008

Since the first HDV(High Definition Video) camcoder, HDR-FX1 with 1080i resolution, had been launched at 2004, the image capture and record with HD resolution have been possible by the various types of camcoder and recorder which can support the HDV format. At a present day, a non-linear editing system, which is composed of only one computer, can capture, edit and export the image with HDV format. The HDV format has the same class of resolution with HD and the same data transfer bit rate of DV(Digital Video). Additionally, the image with HDV format can be recorded in 6mm DV cassette tape. It is possible because the HDV format uses the concept of Long GOP(Gorup of pictures) method for its compression. In this paper, the characteristic feature of HDV format, the essential factors in editing with HDV format and the concept of Long GOP method for its compression have been studied for the way of effective HDV editing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.386-392
• /
• 2015

Data in a image compression codec are processed with a specific regular block size. The processing order of block sized data is changed in specific function blocks and the data is packed in memory and read by a new sequence. To maintain a regular throughput rate, double buffering is normally used that interleaving two block sized memory to do concurrent read and write operations. Single buffering using only one block sized memory can be adopted to the simple data reordering, but when a complicate reordering occurs, irregular address changes prohibit from implementing adequate address generating for single buffering. This paper shows that there is a predictable and recurring regularity of changing address access orders within a finite updating counts and suggests an effective method to implement. The data reordering function using suggested idea is designed with HDL and implemented with TSMC 0.18 CMOS process library. In various scan blocks, it shows more than 40% size reduction compared with a conventional method.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.119-127
• /
• 2007

Based on the critical plane approach, a methodology far predicting the anisotropic strength ot transversely isotropic rock is Proposed. It is assumed that the rock failure is governed by Hoek-Brown failure criterion. In order to establish an anisotropic failure function, Mohr envelope equivalent to the original Hoek-Brown criterion is used and the strength parameters m, s are expressed as scalar functions of orientation. The conjugate gradient method, which is one of the robust optimization techniques, is applied to the failure function for searching the orientation giving the maximum value of the anisotropic function. While most of the existing anisotropic strength models can be applied only when the stress condition is the same as that of conventional triaxial compression test, the proposed model can be applied to the general 3-dimensional stress conditions. Through the simulation of triaxial compression tests for transversely isotropic rock sample, the validity of the proposed method is investigated by comparing the predicted triaxial strengths and inclinations of failure plane.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup2
• /
• pp.254-258
• /
• 2001

Objective : The terminology of degenerative disc disease lacks official standardization. Lacks of such standardization may provoke some clinical and litigation problems. The authors investigated interobserver and intraobserver variability in interpretation of lumbar disc abnormality. Methods : Magnetic resonance imaging studies of the lumbar spine performed prospectively in 50 patients, were read blindly by three doctors dealing spinal disorders, using two nomenclature. Nomenclature I was normal, bulging, protrusion, extrusion. Nomenclature II was normal, bulging, herniation without neural compression, with neural compression. Intraobserver and interobserver variation were measured statistically. Results : Interobserver agreement was 70.4-80.8% for nomenclature I, 76.2-80.2% for nomenclature II. Intraobserver agreement was 84.0-88.0% for nomenclature I, 79.2-86.8% for nomenclature II. Interobserver Kappa statistic was 0.53-0.56 for nomenclature I, 0.54-0.57 for nomenclature II. Intraobserver Kappa statistic was 0.60-0.85 for nomenclature I, 0.53-0.72 for nomenclature II. Conclusion : Experienced doctors showed only moderate interobserver agreement when interpreting disc status on lumbar magnetic resonance imaging. Intraobserver agreement was superior to interbserver. The standardization of nomenclatures for lumbar disc extension beyond interspace are needed.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.7-15
• /
• 2007

A mechanical model was developed to predict the behavior of point-loaded RC slender beams (a/d > 2.5) without stirrups. It is commonly accepted by most researchers that a diagonal tension crack plays a predominant role in the failure mode of these beams, but the failure mechanism of these members is still debatable. In this paper, it was assumed that diagonal tension failure was triggered by the concrete cover splitting due to the dowel action at the initial location of diagonal tension cracks, which propagate from flexural cracks. When concrete cover splitting occurred, the shape of a diagonal tension crack was simultaneously developed, which can be determined from the principal tensile stress trajectory. This fictitious crack rotates onto the crack tip with load increase. During the rotation, all forces acting on the crack (i.e, dowel force of longitudinal bars, vertical component of concrete tensile force, shear force by aggregate interlock, shear force in compression zone) were calculated by considering the kinematical conditions such as crack width or sliding. These forces except for the shear force in the compression zone were uncoupled with respect to crack width and sliding by the proposed constitutive relations for friction along the crack. Uncoupling the shear forces along the crack was aimed at distinguishing each force from the total shear force and clarifying the failure mechanism of RC slender beams without stirrups. In addition, a proposed method deriving the dowel force of longitudinal bars made it possible to predict the secondary shear failure. The proposed model can be used to predict not only the entire behavior of point-loaded RC slender shear beams, but also the ultimate shear strength. The experiments used to validate the proposed model are reported in a companion paper.

• Korean Journal of Remote Sensing
• /
• v.10 no.2
• /
• pp.1-15
• /
• 1994

Since Seasat SAR mission in 1978, SAR has become one of the most important surface imaging tools in satellite remote sensing SAR achieves high resolution by signal processing synthesizing a larger aperture. Therefore, SAR signal processing along with antenna technology has been centered upon SAR technologies. Thus interpreters of SAR imagery as well as those who involved in signal processing require the knowledge of the principal SAR processing algorithm. Although the conventional range-Doppler approach has been widely adopted by many SAR processors, azimuth compression including the range migration has been problematic. The recent development of the wavenumber domain approace is able to provide high precision SAR focusing algorithm. Compared with the wavenumber domain algorithm derived by applying Born (first) approximation, the transfer function of the conventional range-Doppler algorithm accounts only for the first order approximation of the exact transfer function. The results of a simulation and an actual test using airborne C-band SAR configuration demonstrate the dxcellent performance of the wavenumber domain algorithm.