• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.37-55
• /
• 2016

In this study, the influence of centrally placed circular and square cutouts on vibration and buckling characteristics of different ply-oriented laminated panels under the action of compressive and/or tensile types of non-uniform in-plane edge loads are investigated. The panels are inspected under the action of uniaxial compression, uniaxial tension and biaxial, compression-tension, loading configurations. Furthermore, the effects of different degrees of edge restraints and panel aspect ratios are also addressed in this work. Towards this, a nine-node heterosis plate element has been adopted which includes the effect of shear deformation and rotary inertia. According to the results, the tensile buckling loads are higher than that of compressive buckling loads. However, the tensile buckling load continuously reduces with the increased cutout sizes irrespective of ply-orientations. This is also true for compressive buckling loads except for some particular ply-orientations with higher sized cutouts.

• 한국전문물리치료학회지
• /
• 제6권1호
• /
• pp.62-73
• /
• 1999

The purpose of this article was to provide basic knowledge and treatment principles of patient with lymphedema, which was usually not treated at all, or the treatment given didn't work efficiently. Lmphedema is defined as an abnormal accumulation of protein-rich fluid, edema, and chronic inflammation within an extremity. Lmphedema may be classified as either primary results from defects with aplasia, hypoplasia, and hyperplasia in the lymphatic system at birth or secondary is caused by known precipitating factors such as cancer, infection, inflammation, radiation, surgery, or trauma etc. There are essentially several conservative treatment methods which has been utilized successfully to treat lymphedema in Samsung Medical Center. We used following procedures: CPT (Complex Physical therapy) or CDP (Complex Decongesitive Physical therapy) such as skin care, MLD (Manual Lymph Drainage), compression with short-stretch bandage, exercise, elevation, elastic stocking, and pneumatic compression. Our experiences shows that conservative treatments can significantly reduce lymphedema and prevent different complications.

• 한국산업융합학회 논문집
• /
• 제14권3호
• /
• pp.113-119
• /
• 2011

This study analyzed facts affecting the performance of refrigeration systems after throttling actions, by changing the amount of refrigerant according to adjusting the opening of manual expansion valve to 80%, or 20% with vapor compressional refrigeration training equipment. At opening of 20%, the inlet and outlet temperature of compressor, subcooling and superheat, condenser heat, refrigeration effect, flash gas heat, coefficient of performance were higher, while at 80%, condensing pressure, evaporating pressure, compression work were higher, Thus, we could see changes in the amount of refrigerant affect the performance of the refrigeration system.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1124-1124
• /
• 2001

CARNAC is a procedure for obtaining quantitative analysis of a sample by comparison of the NIR spectra of the unknown sample with a database of a large number of samples with NIR spectral and compositional data. The method depends on the compression of the NIR database followed by a modification of the compressed data which emphasizes the required analyte. The method identifies a few very similar samples and the value of the required analyte is calculated from a weighed average of the analyte values for the selected similar samples. The method was originally described at Chambersburg IDRC in 1986 and in the Proceedings of the FT Conference of 1987. This contribution will describe recent work on utilising new methods for both compression and modification.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1526-1531
• /
• 2007

Data transmission capacity that is required in 2010 is forecasted that increase by optical communication capacity more than present centuple, and is doing increased demand of optical communication related industry product present. Specially, Lid glass' application that is one of optical communication parts is used in optical communication parts manufacture of Fiber array, Ferrule array, Fanout Black, Silica optical waveguide chip and splitter etc. Also, it is used widely for communication network system, CATV, ATM-PON, FTTH and system. But, Lid glass need much processing times and becomes cause in rising prices of optical communication parts because production cost is expensive. The objectives, of this work is to suggest the micro concave and convex pattern manufacturing technology on borosilicate plate using high temperature and compression molding method. As a result, could developed micro pattern Mold more than 5 pattern, and reduce Lid Glass manufacture cycle time.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.161-165
• /
• 1997

Recently, industrial accidents have been getting great damage to an enterprise management directly and indirectly, the industrial injuries of conventional type are decreasing : on the other hand, musculoskeletal injuries are trending to a rapid increase. This shows that most of carrying works have been performing in almost all production process and convey objects, machine equipment and work method. Then, they are made by unfitted design which doesn't consider physical condition of workers, so it causes them to bring about forceful motion. In this paper, it was used NIOSH standard the data of spot. The ergonomic design of machine equipment and the evaluation of biomechanical compression force at theL_5/S_1$and back power, intend to provide the basis which can be applied, compared, and analyzed between before process improvement and after.

• Computers and Concrete
• /
• 제15권5호
• /
• pp.709-733
• /
• 2015

This work deals with a damage model formulation taking into account the unilateral effect of the mechanical behaviour of brittle materials such as concrete. The material is assumed as an initial elastic isotropic medium presenting anisotropy, permanent strains and bimodularity induced by damage evolution. Two damage tensors governing the stiffness in tension or compression regimes are introduced. A new damage tensor in tension regimes is proposed in order to model the diffuse damage originated in prevails compression regimes. Accordingly with micromechanical theory, the constitutive model is validate when dealing with unilateral effect of brittle materials, Finally, the proposed model is applied in the analyses of reinforced concrete framed structures submitted to reversal loading. The numerical results have shown the good performance of the modelling and its potentialities to simulate practical problems in structural engineering.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.1-17
• /
• 2009

This paper is focused on the buckling and post buckling behaviour of rectangular corrugated board panels simply supported and subjected to compression load. The aim of the work is to understand the failure mechanism of investigated structure in order to quantify the effect of design parameters on the strength of a panel of given geometry. Two numerical models were developed adopting the finite element method. In the first one the corrugated board is represented by means of shell elements adopting an equivalent material, in the second the local structure is described in full detail modelling both straight and corrugated layers by means of shell elements and representing the connection between layers by special interface elements. The model correctness was checked by the comparison between out of plane central displacement predicted by the models and the experimental values found in literature. For the same case the effect of panel planarity error was evaluated. Finally a parametric analysis to investigate the effect of design parameters was carried out.

• 한국음향학회지
• /
• 제14권1호
• /
• pp.5-12
• /
• 1995

Training 벡터 집합이 Cluster를 이루는 경우, 벡터 양자화에서 영상과 음성의 압축에 사용되는 코드북의 코드벡터는 Cluster의 중심벡터로 간주된다. 본 연구에서는 Training 벡터 간의 Euclidean 거리가 최소가 되는 벡터를 찾는 과정에서 얻어지는 Euclidean 거리분포를 관찰하여 적절한 Cluster수와 그 중심벡터를 결정할 수 있는 방법을 제시하고, 제안된 방법이 기존의 LBG 알고리즘이나 Competitive 학습 알고리즘에 의한 영상 압축보다 약 4[dB] 이상 향상된 SNR을 얻을 수 있음을 보인다.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.579-589
• /
• 2017

The objective of this work is to analyze post-buckling of functionally graded (FG) beams with porosity effect under compression load. Material properties of the beam change in the thickness direction according to power-law distributions with different porosity models. It is known that post-buckling problems are geometrically nonlinear problems. In the nonlinear kinematic model of the beam, total Lagrangian finite element model of two dimensional (2-D) continuum is used in conjunction with the Newton-Raphson method. In the study, the effects of material distribution, porosity parameters, compression loads on the post-buckling behavior of FG beams are investigated and discussed with porosity effects. Also, the effects of the different porosity models on the FG beams are investigated in post-buckling case.