• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.139-141
• /
• 2007

Compression tests were carried out to investigate morphologies of compressed specimen, deformation microstructure and stress-strain relation in high-nitrogen austenite stainless steel. Tests were performed under a wide range of temperature and, with true strain rates up to $\dot{\varepsilon}$ =0.05, 0.1, 0.5 and $1.0s^{-1}$. The activation energy of loading force was equal to plastic deformation energy within the temperature range of $900^{\circ}C$ to $1250^{\circ}C$. Dynamically recrystallized grain size decreased with an increasing strain rate and temperature. Flow stresses and deformation microstructures, were used to quantify the critical strain rate and recrystallized grain size. The grain size versus strain rate-temperature map obtained in the study was in good agreement with the deformation microstructures of compressed specimens.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.98-108
• /
• 2023

In this study, the boards were manufactured according to the mandarin peels addition rate using sawdust and mandarin orange peel. After that, the mechanical properties and density profile of ceramics prepared by conditions through resin impregnation process and carbonization process were investigated. The bending and compression strengths of ceramics tended to increase as the resin impregnation rate increased. When the resin impregnation rate was 70%, the highest values were 8.58 MPa and 14.77 MPa, respectively. Also, the mechanical properties of ceramics according to carbonization temperature showed the highest values at 1,200℃ for bending strength of 11.09 MPa and compression strength of 17.20 MPa. The bending strength and compression strength according to the mandarin peels addition rate showed the highest values at 8.62 MPa and 14.16 MPa, respectively, when the mandarin orange peel addition rate was 5%. The mechanical properties tended to decrease when the addition rate of mandarin orange was increased. The density profile of ceramics showed a similar tendency to the mechanical properties. It can be seen that the density distribution from the surface layer to the center layer is more uniform as the resin impregnation rate and carbonization temperature increase and the mandarin peels addition rate decreases.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.354-359
• /
• 2007

Effects of forging and mechanical properties of 6061 aluminum alloy wheel for automobiles were investigated in the present study. Microstructural and tensile characteristics of automobile wheel after hot forging process using dynamic screw press were analyzed to evaluate effect of metal flow on mechanical properties. The results showed advanced mechanical properties of 6061 alloy wheel because of $Mg_2Si$ precipitation by T6, elongated grain by forging, and work hardening by dense metal flow, etc. Hot compression tests were conducted in order to characterize high temperature compression deformation behaviors and microstructural variation in the range of $300{\sim}450^{\circ}C$, in the strain rate range of $10^{-3}{\sim}10^1\;sec^{-1}$. As strain rate increased, maximum compression stress increased but it was shown the reverse linear relation between temperature and maximum stress irrelevant to strain rate variation. On the other hand, temperature and yield stress didn't have any linear relation and its relation showed big deviation by a function of strain rate and test temperature.

• 정보처리학회논문지A
• /
• 제13A권3호
• /
• pp.185-190
• /
• 2006

JPEG 2000 알고리즘은 기존의 정지영상 압축 PEG 알고리즘에서 발생하는 블록화 현상의 문제점을 해결하였지만, 압축 율과 이미지 복원율을 높이기 위한 과정이 복잡해 졌고 부동소수점의 연산 시간이 많이 걸리는 단점을 가지고 있다. 이 단점을 보완하기 위하여 본 논문은 JPEG 2000 알고리즘의 부동소수점 연산이 많은 필터 부분을 하드웨어로 구현하였다. 이 DWT Filter[1] 칩은 Daubechies 9/7 filter[6]을 기반으로 설계되었고 성능과 크기(반도체 숫자)를 최적화하기 위해서 3 단계 파이프라인 시스템으로 구성되었다. 본 논문에서 설계한 Filter는 소프트웨어로 구현된 것보다 부동 소수점의 연산에서 7배 정도 성능이 향상되었다.

• Geomechanics and Engineering
• /
• 제29권4호
• /
• pp.451-461
• /
• 2022

The roadways surrounded by rock and coal will lose their stability or even collapse under rock burst. Rock burst mainly involves an evolution of dynamic loading which behaves quite differently from static or quasi-static loading. To compare the dynamic response of coal and rocks with different static strengths, three different rocks and bituminous coal were selected for testing at three different dynamic loadings. It's found that the dynamic compression strength of rocks and bituminous coal is much greater than the static compression strength. The dynamic compression strength and dynamic increase factor of the rocks both increase linearly with the increase of the strain rate, while those of the bituminous coal are irregular due to the characteristics of multi-fracture and heterogeneity. Moreover, the absorbed energy of the rocks and bituminous coal both increase linearly with an increase in the strain rate. And the ratio of absorbed energy to the total energy of bituminous coal is greater than that of rocks. With the increase of dynamic loading, the failure degree of the sample increases, with the increase of the static compressive strength, the damage degree also increases. The static compassion strength of the bituminous coal is lower than that of rocks, so the number of small-scale fragments was the largest after bituminous coal rupture.

• Journal of Acupuncture Research
• /
• 제35권4호
• /
• pp.219-225
• /
• 2018

Background: The purpose of this study was to review whether Korean medicine treatment was effective to maintain the spinal stability and to relieve spinal symptom by reviewing medical records of 18 vertebral compression fracture patients. Methods: The subjects were 18 thoracolumbar compression fracture patients who were taken more than two lateral view x-rays of fractured vertebra from Jan, 2010 to June, 2018. They were divided into two groups: the time admitted into Department of Acupuncture & Moxibustion Medicine, Pohang Korean Medical Hospital of Daegu Hanny University from onset (Research 1) and whether or not they have a past history of osteoporosis (Research 2). Then, they were follow-up observed and compared by compression ratio and numerical rating scale (NRS) and so on. Results: The amount of weekly compression rate increase of 18 patients was 1.76% per week. According to the result of Research 1, the patients group (14 patients) who were admitted into the hospital within 1-2 weeks from getting injury was 1.88% per week whereas the patients group(4 patients) who were admitted into the hospital within 3-4 weeks from getting injury was 1.22% per week. By Research 2 result, the patients group (7 patients) who had been diagnosed as an osteoporosis patient was 2.19% per week, and those (11 patients) who had not was 1.49% per week. There was a statistical significance in the change of the amount of compression rate increase in the case of Research 1, but there was not in the case of Research 2. NRS was decreased without significant difference regardless of the time admitted into the hospital and whether or not the patients had the past history of osteoporosis. Conclusion: Considering that there were more amount of compression rate increase at 1-4 weeks from onset, it is necessary to offer treatment more actively on early time from onset. Further research is needed into the increase of compression rate by the patients' having a past history of osteoporosis or not. Given that NRS decreased without significant difference, it is assumed that Korean medicine treatment has a meaningful effect on relieving subjective symptom of patients who are diagnosed as vertebral compression fractures.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.83-90
• /
• 2004

A flywheel-driven rapid compression and expansion machine is developed and utilized for experimental study of homogeneous charge compression ignition combustion. Compression ignition of homogeneous charge in IC engines offers possibilities of realizing ultra-lean engine operation with greatly reduced NOx and particulate formation. Fundamental investigations are carried out in order to better understand this ideal engine combustion mechanism. Perfectly premixed propane-air mixtures of various equivalence ratio are compression-ignited in the rapid compression and expansion machine, and the characteristics of the auto-ignition and the following combustion process are analyzed.

• 인터넷정보학회논문지
• /
• 제21권4호
• /
• pp.35-41
• /
• 2020

본 논문은 Context Tree Weighting (CTW) 를 이용하여 Adaptive Multi-Rate (AMR) 데이터의 압축 성능을 개선하는 알고리즘을 제안한다. AMR은 IMT-2000에서 채택된 음성부호화 표준안으로써, 무선채널의 환경변화에 대처할 수 있도록 4.75 kbit/s 에서 12.2 kbit/s 까지 8가지의 전송률을 지원한다. CTW는 산술부호화기의 일종으로, 가변 차수 마르코프 모델을 사용하는 압축기이다. 우리는 CTW가 비트단위로 수행한다는 점을 고려하여 AMR 데이터를 변환한 후 CTW로 압축하는 알고리즘을 제안한다. 제안하는 알고리즘의 유효성을 검증하기 위하여 ZIP을 포함한 기존 압축방식과 제안된 알고리즘의 압축률을 비교하는 실험을 하였다. 실험 결과, AMR 데이터의 평균 추가 압축률이 ZIP의 경우 약 3.21%, 제안된 알고리즘의 경우 약 9.10%로 나타났다. 따라서 본 논문에서 제안한 알고리즘이 AMR 데이터의 압축 성능을 약 5.89% 개선하였다.

• 한국인터넷방송통신학회논문지
• /
• 제15권3호
• /
• pp.77-83
• /
• 2015

블록절단 코딩 또는 BTC(Block Truncation Coding)는 회색 영상을 위한 손실 영상 압축 기술의 일종이다. 이 방법은 원본 영상을 여러 개의 블록으로 나누고 각 블록에 대해서 평균과 표준편차를 계산하여 각 블록에서의 회색 레벨의 수를 줄인다. BTC는 비디오 압축에 적합하도록 만들어졌다. BTC의 변형된 것으로 AMBTC (Absolute Moment Block Truncation Coding)가 있다. AMBTC는 BTC보다 계산이 간편하다. 본 논문에서는 압축 성능과 이미지 해상도를 높이기 위해서 패턴을 활용한 BTC 기반의 이미지 압축방법을 제안하고자 한다. 이 방법은 여러 이미지의 BTC에 빈도수가 높은 패턴 36개와 64개를 추출하여 코드 북을 만든다. 이미지를 압축할 때 해당 블록과 패턴을 비교해서 일치하는 패턴의 인덱스를 압축에 이용하는 방법이다. 제안한 방법을 실험하였고 36개의 패턴을 활용할 경우 1.37bpp의 압축 성능을 보였다. 본 논문에서 제안한 방법은 BTC 압축보다 높은 성능을 보였다. 제안한 방법의 성능은 표준 이미지를 이용하여 실험하였다.

• 융합정보논문지
• /
• 제9권11호
• /
• pp.227-233
• /
• 2019

본 연구는 병원 전 환경에서 기계식 가슴압박기(LUCAS)와 수기심폐소생술의 비교실험을 통해 가슴압박의 질을 평가하고 기계적 가슴압박기를 사용한 효과적인 전문심장소생술을 제안하는데 그 목적이 있다. 병원 전 심정지상황을 가정하고 구급대원이 3인 1조로 현장에서 수기심폐소생술과 LUCAS를 이용한 심폐소생술을 적용하고, 구급차로 이송하며 수기심폐소생술과 LUCAS를 이용한 심폐소생술을 시행하였다. 연구결과는 다음과 같다. 첫째, 현장과 이송중의 수기심폐소생술의 비교결과 현장에서 수기심폐소생술이 평균압박깊이와 압박률, 이완율에서 유의한 차이가 나타났다(p<.001). 둘째, 현장에서 수기심폐소생술과 LUCAS를 비교한 결과 LUCAS가 압박률, 이완율에서 유의한 차이가 나타났다(p<.001). 셋째, 구급차로 이송중 수기심폐소생술과 LUCAS를 비교한 결과 평균압박깊이, 압박률, 분당압박횟수에서 유의한 차이를 보였다(p<.001). 위와 같은 결과로 보아 LUCAS는 적절한 압력으로 가슴압박을 수행할 수 있고, 그 동안 구급대원의 전문기도기 삽입, 정맥로 확보 등의 전문심장소생술을 추가적으로 수행할 수 있으며 환자의 소생률을 높이는데 기여할 것이다.