• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.398-403
• /
• 2011

Recently, Near-infrared (NIR)colorant is intriguing and attractive but full of challenges. Although some cyanine colorant have been commercialized, near-infrared colorant with intensive NIR absorption, good chemical and photo-stability, and high solubility still remain as target compound. Certain polycyclic aromatic compounds such as quaterrylene represent a key class of NIR colorant and also give rise to outstanding physical and chemical properties after appropriate chemical modification. In this study, We have tried to introduceimide functional group to quaterrylene in order to give chemical and thermal stability. Finally, N,N'-bis (2,6-diisopropylphenyl)-quarterrylene-3,4:13,14-tetracarboximide was synthesized and evaluated its properties using $^1H$ NMR, Maldi-tof, TGA, and UV/VIS/NIR spectroscopy as NIR colorant. The quaterrylene bisimide compound exhibit a excellent thermal stability and chemical stability.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.38-42
• /
• 2016

For improving the heat loss of a refrigerator around door gasket, it is very important to reduce the amount of rubber magnet used, of which thermal conductivity is much higher than the plastics, and enhancing the magnetic properties of rubber magnet itself is crucial for this. In the present study, therefore, a relationship between the optimum conditions of rubber magnet fabrication process and raw material compositions in the ferrite powder/CPE binder compounds was investigated for finding a way to enhance the magnetic properties of rubber magnet. Magnetic attraction forces of a sample rubber magnet was measured as function of distance, and thermal properties of the sample ferrite powder/CPE binder compound were analyzed with TG/DTA thermal analyzer. As a results, a rubber magnet strip with enhanced magnetic properties was expected to be fabricated, of which raw material compound was prepared by compounding with higher ferrite magnetic powder concentration.

• Transactions on Electrical and Electronic Materials
• /
• 제2권4호
• /
• pp.7-10
• /
• 2001

A new possibility of our atmospheric cold plasma torch has been examined on the surface treatment of an air-exposed vulcanized rubber compound. The plasma treatment effect was evaluated by the bondability with another rubber compound using a polyurethane adhesive. The adhesion property was improved by the treatment with plasma containing oxygen radicals. The oxygen radical generation from the plasma was verified and its efficiency was found to be dependent on the cathode material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.223-223
• /
• 2007

Thermal and mechanical properties were investigated in several semi-conductive materials which is composed of carbon black and polymer. EVA, EEA, and EBA is normally used for matrix polymer and normally acetylene black and furnace black is used. Isothermal thermo gravimetric analysis is done as a function of atmosphere and temperature. In nitrogen atmosphere semicon compound was slowly degradaded but in ambient condition degradaded fast. So in the cable manufacturing, atmosphere and materials are very important.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.77-78
• /
• 2006

We fabricated photonic crystals on GaAs and GaN substrates. After anodizing the aluminium thin film in electrochemical embient, the porous alumina was implemented to the mask for reactive ion beam etching process of GaAs wafer. And photonic crystals in GaN wafer were also fabricated using electron beam nano-lithography process. The coated PMMA thin film with 200 nm-thickness on GaN surface was patterned with triangular lattice and etched out the GaN surface by the inductively coupled plasma source. The fabricated GaAs and GaN photonic crystals provide the enhanced intensities of light emission for the wavelengths of 858 and 450 nm, respectively. We will present the detailed dimensions of photonic crystals from SEM and AFM measurements.

• Bulletin of the Korean Chemical Society
• /
• 제11권5호
• /
• pp.464-466
• /
• 1990

A ternary Zintl phase material of the formula $K_2Ga_2Sb_4$ has been prepared directly from reaction of the elements following a high temperature procedure. The compound consists of potassium ions and planar ribbons of $(Ga_2Sb_4^{-2})_{\infty}$ consisting of five membered $[Ga_2Sb_3]$ rings bridged by Sb atoms. The variable temperature specific resistivity measurements show the material to be an intrinsic semiconductor.

• 한국결정성장학회지
• /
• 제21권6호
• /
• pp.246-252
• /
• 2011

반도성 $MnSi_{1.73}$ 화합물은 고온 특성이 우수하고 뛰어난 내산화성을 가진 열전재료로서 알려져 있다. 본 연구에서는 순 Mn 및 Si 분말재료를 출발 원료로 기계적 합금화법(MA)을 적용하여 $MnSi_{1.73}$ 화합물 합성을 실시하였다. MA 처리는 P-5 유성형 볼밀장치를 이용하여 Ar 중에서 행하였다. MA 분말재료의 X선 회절, 열분석 및 전자현미경 분석을 통하여 고상반응을 관찰하였다. MA 공정 중 Si의 손실을 고려하여 화학양론 조성에서 Si 양을 증가시켜 $MnSi_{1.73}$ 화합물 합성을 시도하였다. 그 결과 $MnSi_{1.73}$ 화합물 단상은 $MnSi_{1.88}$ 조성의 혼합 분말을 200시간 볼밀 처리함으로써 얻을 수 있었다. 또한 200시간 볼밀 처리에 의하여 제조된 $MnSi_{1.73}$ 화합물의 평균결정립 크기는 40 nm 임을 X 선 회절피크의 Hall plot으로 부터 알 수 있었다.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.650-658
• /
• 2000

This study was investigated to compare the bond strength of polysulfide adhesive between tray resin and border molding materials and to evaluate the effect of saliva contamination on them. We made the 135 resin tray secimens with a dimension of $1{\times}1{\times}1cm$ and divided them into 3 groups by the materials 1) Quicky group, 2) Compound group, and 3) Impregum group Each group was subdivided by saliva contimination. Group S1 : applied adhesive without saliva contamination Group S2 : applied adhesive after drying 15seconds after saliva contamination Group S3 : applied adhesive no after saliva contamination. Tensile tests were performed with a Universal Load testing machine. Results showed Impregum group significantly higher bond strength than Quicky group, but there was no significant difference in adhesive bond strength between Compound group and Quicky group in experimental group by materials In experimental group by saliva contamination, S1 group is significantly higher bond strength than S2 group and S2 group is significantly higher bond strength than S3 group in Quicky group and S1, S2 group is significantly higher bond strength than S3 group in Compound group and Impregum group. Impression compound and Impregum F which are usually used as an individual tray border mold-ing material can be said to be satisfied in adhesive bond strength to polysulfide impression materials. After try-in and clinical adjustment are performed, a custom tray should be properly rinsed and air dried before tray adhesive was placed.

• 한국융합학회논문지
• /
• 제12권1호
• /
• pp.193-198
• /
• 2021

본 연구에서는 초고압(Extra High Voltage) 케이블의 방식층(Oversheath)에 사용되는 반도전성 난연컴파운드의 보다 우수한 내충격성 및 전기적 특성을 만족할 수 있는 나노융복합 소재기술에 대해 연구하였다. 반도전성 난연컴파운드에 사용되는 도전성 카본블랙 일부를 CNT(carbon nano tube)로 대체하였으며, 이때 물성변화를 분석하였다. 전기적 특성이 현격하게 뛰어난 탄소나노튜브의 적용을 통해 소량의 전도성필러 처방으로도 보다 우수한 전기적 특성을 부여할 수 있게 된다. 또한, 컴파운드 기준 전체 필러량이 감량됨에 따라서 가공성이 향상되며, 특히 유연성 및 내충격성이 향상되기 때문에 케이블의 내구성 향상에 기여할 것으로 기대된다.

• 건축역사연구
• /
• 제18권6호
• /
• pp.23-46
• /
• 2009

The history to have used lime in building construction was much long without distinction of the East or the West. The ancient nations of korean peninsula had used lime as construction material. The witness was discovered in the kings' tombs of fifth century. In the Joseon dynasty(15~19c), what applied several developed lime compounds to the kings' tombs have been recorded in 'Sanleong-Uigwe(山陵儀軌)' & 'Yeonggeon-Uigwe(營建儀軌)' of those days documents. Therefore, this paper is to examine the whole procedures from the product and provision of lime to its application through those days documents. Following conclusions have been reached through the study. Three lime compounds to be developed for the kings' tombs was extendedly applied to residential government buildings step by step within the current of time. These compounds to be used in the kings' tombs of the Joseon dynasty had been correlated to those of the ancient nations, which were nations of korean peninsula in narrow range, chinese and orient nations in broad range. These compounds have possibilities of development as the environmental-friendly building material. And these compounds should provide a standard specification for conservation & restoration of the traditional and cultural properties. I could confirm that the whole procedures had not been developed within limited space-time of the specified nation & period, but within interactions of the nations & periods. In the periods which disturb its interaction, the expansion of productivity in building construction was interfered.