• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.47-51
• /
• 2015

To achieve a high tunneling magneto resistance (TMR) of sputtered magnetic tunnel junctions (MTJs) with an MgO barrier, the annealing process is indispensable. The structural and compositional changes as consequences of the annealing greatly affect the spin-dependent transport properties of MTJs. Higher TMR could be obtained for MTJs annealed at higher annealing temperature. The diffusion of Ru, Mn and/or Ta in the MTJs may occur during annealing process, which is known to be detrimental to spin-dependent tunneling effect. The rapid thermal annealing (RTA) process was used for annealing the MTJs with synthetic antiferromagnets. To suppress the diffusion of Mn, Ru and/or Ta in the MTJs, the process time and temperature of RTA were minutely controlled.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1230-1231
• /
• 2008

The effect of content of $Al_2O_3+Y_2O_3$ sintering additives on the densification behavior, mechanical and electrical properties of the pressureless-sintered $SiC-ZrB_2$ electroconductive ceramic composites was investigated. The $SiC-ZrB_2$ electroconductive ceramic composites were pressureless-sintered for 2 hours at 1,700[$^{\circ}C$] temperatures with an addition of $Al_2O_3+Y_2O_3$(6:4 mixture of $Al_2O_3$ and $Y_2O_3$) as a sintering aid in the range of 8${\sim}$20[wt%]. Phase analysis of $SiC-ZrB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), $ZrB_2$ and In Situ YAG($Al_5Y_3O_{12}$). The relative density, flexural strength, Young's modulus and vicker's hardness showed the highest value of 89.01[%], 81.58[Mpa], 31.437[GPa] and 1.34[GPa] for $SiC-ZrB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature respectively. Abnormal grain growth takes place during phase transformation from ${\beta}$-SiC into ${\alpha}$-SiC was correlated with In Situ YAG phase by reaction between $Al_2O_3$ and $Y_2O_3$ additive during sintering. Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites. In this paper, it is convinced that ${\beta}$-SiC based electroconductive ceramic composites for heaters or ignitors can be manufactured by pressureless sintering.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.382-382
• /
• 2012

CIGS thin films have received great attention as a promising material for solar cells due to their high absorption coefficient, appropriate bandgap, long-term stability, and low cost production. CIGS thin films are deposited by various methods such as co-evaporation, sputtering, spray pyrolysis and electro-deposition. The deposition technique is one of the most important processes in preparing CIGS thin film solar cells. Among these methods, co-evaporation is one of the best technique for obtaining high quality and stoichiometric CIGS films. However, co-evaporation method is known to be unsuitable for commercialization. The sputtering is known to be very effective and feasible process for mass production. In this study, CIGS thin films have prepared by rf magnetron sputtering using a $Cu(In_{1-x}Ga_x)Se_2$ single quaternary target without post deposition selenization. This process has been examined by the effects of deposition parameters on the structural and compositional properties of the films. In addition, we will explore the influences of substrate temperature and additional annealing treatment after deposition on the characteristics of CIGS thin films. The thickness of CIGS films will be measured by Tencor-P1 profiler. The crystalline properties and surface morphology of the films will be analyzed using X-ray diffraction and scanning electron microscopy, respectively. The optical properties of the films will be determined by UV-Visible spectroscopy. Electrical properties of the films will be measured using van der Pauw geometry and Hall effect measurement at room temperature using indium ohmic contacts.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.93-97
• /
• 2003

Using alumina-glass infiltrated material which has been in the spotlight of biomaterials including dental material, appropriate composition of glass infiltrated material mainly depends on the thermal expansion coefficient. To obtain proper compositional glass of suitable thermal expansion coefficient effiiently. a Taguchi analysis was conducted. The influence of alkali oxide and alkali earths oxide, which affect mostly the thermal expansion coefficient of glass infiltrated material, was infiltrated material, the effect having influenced on the thermal expansion coefficient of glass was presented in this order (Na$_2$O≫K$_2$O ≫MgO≒CaO). The effect of Na$_2$O was about eight times as great as the effects of MgO, CaO and $K_2$O was about four times. Among the interaction affects of each variables the interaction affects of $K_2$O-CaO showed most significantly and thermal expansion property of specified composition was predicted by calculating contribution rate on each level of variables and interaction affects.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.815-824
• /
• 2006

This study was performed to determine the optimum ratio of each ingredient in the steamed foam cake with barley (Hordeum vulgare L.) sproutling powder. The experiment was designed according to the D-optimal design of mixture design, which showed 14 experimental points including 4 replicates for three independent variables (sugar 112${\sim}$139%, barley sproutling powder 1${\sim}$8%, and oil 5${\sim}$25%). The compositional and functional properties of test were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed the influence of each ingredient on the mixture final product. The results of F-test, volume, color values (L, a, b), textural properties (hardness, gumminess, chewiness) and sensory characteristics (softness) decided a linear model, while the sensory characteristics (color, smell, taste, overall acceptance) decided a quadratic model. The volume of steamed foam cake was increased by sugar addition, and a negative effect was exerted by barley sproutling powder and oil. L and a of color values increased but the b value decreased with increasing sugar and oil content, whereas barley sproutling powder tended to decrease all color values. The addition of barley sproutling powder also had a positive effect on the textural properties (hardness, gumminess, chewiness). Sensory characteristics (color, smell, softness, taste, overall acceptance) could suffer counter results with the excessive addition of sugar, barley sproutling powder, and oil. The optimum formulations by numerical and graphical methods were similar: sugar, barley sproutling powder, and oil were 130.4%, 4.0%, and 10.7% by numerical method, compared to 130.4%, 4.0%, and 10.7% by graphical method, respectively.

• Journal of Families and Better Life
• /
• v.33 no.5
• /
• pp.37-53
• /
• 2015

The purpose of this study is to examine the differences in perceived time pressure between employed and non-employed married women in Korea. The sample of married couple from the Korean Time Use Survey 2009 (n = 6,948 couple diaries) was used to examined the difference in the level of perceived time pressure over the life cycle of two group. This study also investigated the married women's time use, husband's time use as well as hour of domestic outsourcing and whether such factors are associated with lowering perceived time pressure of married women. Results showed employed wives felt almost 3 times more time pressed than non-employed wives, and the gap mostly remained over different life cycles. Total work hours were associated with increasing the time pressure of both groups of women, while regenerating time was associated with ameliorating time pressure. The result suggests that the time pressure gap between employed and non-employed wives can be partly due to the relative length of total labor hours and regenerating time among the two groups. Ordered logit analysis revealed that husband's paid work hours were not associated with wive's feeling rushed, but husband' unpaid work hours were positively linked with time pressure of their wives. Results indicated if employed or non-employed wives are feeling very busy, there is a high chance that husband might give them some help. We found employed wives spend more hours on housework outsourcing, and purchasing goods for housework was not associated with lowering the feeling of pressure of employed wives. There were both similarity and difference in factors associated with women's feeling pressed among employed and non-employed wives. It implies that social process and it's strategies to alleviate the time pressure can be different by women's employment status.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.300-311
• /
• 2019

The corrosion behaviors of twinning-induced plasticity (TWIP) steels with different alloying elements (Cu, Al, Si) in a neutral aqueous environment were investigated in terms of the characteristics of the corrosion products formed on the steel surface. The corrosion behavior was evaluated by measuring potentiodynamic polarization test and electrochemical impedance spectroscopy. For compositional analysis of the corrosion products formed on the steel surface, an electron probe x-ray micro analyzer was also utilized. This study showed that the addition of Cu to the steel contributed to the increase in corrosion resistance to a certain extent by the presence of metallic Cu in discontinuous form at the oxide/steel interface. Compared to the case of steel with Cu, the Al-bearing specimen exhibited much higher polarization resistance and lower corrosion current by the formation of a thin Al-enriched oxide layer. On the other hand, Si addition (3.0 wt%) to the steel led to an increase in grain size, which was twice as large as that of the other specimens, resulting in a deterioration of the corrosion resistance. This was closely associated with the localized corrosion attacks along the grain boundaries by the formation of a galvanic couple with a large cathode-small anode.

• Journal of Sasang Constitutional Medicine
• /
• v.29 no.3
• /
• pp.211-223
• /
• 2017

Objectives The purpose of this study is to understand the formation of Jogakdaehwang-tang(JD-T)'s patholoy and the compositional change of it in Sasang Constitutional Medicine(SCM). Methods The pathologic condition in which JD-T was used and the change of its composition was studied in SCM Results and Conclusions 1. Jogak and Daehwang in "Dongmuyoogo Haedong" were presented with Ungdam because of the common purpose flowing the energy of lung. Therapeutic method for exogenous Ungibyeong in "Dongyisusebowon sangchobongwon" was subdivided into Hangwul's treated by Ungdam, and the heat pattern featuring contagious cold and constipation, treated by Jogakhwanggeumdaehwang-tang(JHD-T). 2. JD-T in "Dongyisusebowon Gabogubon" was used for Yangdok and Onbyeong which are exogenous disease causing by heat. The composition of JD-T has been completed as it included Mahwang, Gilgyeong, and Seungma derived from prescriptions relevant with Yangdok. 3. JD-T in "Dongyisusebowon Sinchukbon(Sinchukbon)" was included in pathology of Ganyeol, and it substituted Galgeunhaegi-tang(GH-T) for Onbyeong, not for Yangdok, so Galgeun and Seungma became the main drug in JD-T. Galgeunseung-gitang(GS-T) was created for treating heat pattern owing to Daehwang, its main drug, and moreover Jogak's effect is too strong. Therefore, Mahwang, Hwanggeum and Gilgyeong was excluded from the composition of JD-T. 4. The origins of JD-T could be Yiseonggugo-hwan, Daesiho-tang, Jowiseungchung-tang, Heukno-hwan, and GH-T. The change of JD-T went for them throughout JHD-T to JD-T. JD-T in "Sinchukbon" consists of Galgeun and Daehwang which directly gets rid of severe heat from small intestine, and Jogak and Seungma which help to eliminate mild heat existing from small intestine throughout nose to flesh.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.510-516
• /
• 2013

Fly ash is one of the aluminosilicate sources used for the synthesis of geopolymers. The particle size distribution of fly ash and the content of unburned carbon residue are known to affect the compressive strength of geopolymers. In this study, the effects of particle size and unburned carbon content of fly ash on the compressive strength of geopolymers have been studied over a compositional range in geopolymer gels. Unburned carbon was effectively separated in the $-46{\mu}m$ fraction using an air classifier and the fixed carbon content declined from 3.04 wt% to 0.06 wt%. The mean particle size ($d_{50}$) decreased from $22.17{\mu}m$ to $10.79{\mu}m$. Size separation of fly ash by air classification resulted in reduced particle size and carbon residue content with a collateral increase in reactivity with alkali activators. Geopolymers produced from carbon-free ash, which was separated by air classification, developed up to 50 % higher compressive strength compared to geopolymers synthesized from raw ash. It was presumed that porous carbon particles hinder geopolymerization by trapping vitreous spheres in the pores of carbon particles and allowing them to remain intact in spite of alkaline attack. The microstructure of the geopolymers did not vary considerably with compressive strength, but the highest connectivity of the geopolymer gel network was achieved when the Si/Al ratio of the geopolymer gel was 5.0.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.179.1-179.1
• /
• 2011

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. The objective of this study was to evaluate the effect of combined aqueous ammonia-dilute sulfuric acid treatment on cellulosic biomass. Miscanthus was pretreated using aqueous ammonia and dilute sulfuric acid solution under high temperature and pressure conditions to be converted into bioethanol. Aqueous ammonia treatment was performed with 15 %(w/w) ammonia solution at $150^{\circ}C$ of reaction temperature and 20 minutes of reaction time. And then, dilute sulfuric acid treatment was performed with 1.0 %(w/w) sulfuric acid solution at $150^{\circ}C$ of reaction temperature and 10 minutes of reaction time. The compositional variations of this combined aqueous ammonia-dilute sulfuric acid treatment resulted in 68.0 % of cellulose recovery and 95.7 % of hemicellulose, 81.3 % of lignin, 89.1 % of ash removal respectively. The enzymatic digestibility of 90.5 % was recorded in the combined pretreated Miscanthus sample and it was 14.7 times higher than the untreated sample. The ethanol yield in the Simultaneous Saccharification and Fermentation was 90.4 % of maximum theoretical yield based on cellulose content of the combined pretreated sample and it was about 98 % compared to the ${\alpha}$-cellulose ethanol yield.