• Smart Structures and Systems
• /
• 제26권4호
• /
• pp.469-480
• /
• 2020

This is the first research on the smart control and vibration analysis of a Graphene nanoplatelets (GPLs) Reinforced Composite (GPLRC) porous cylindrical shell covered with piezoelectric layers as sensor and actuator (PLSA) in the framework of numerical based Generalized Differential Quadrature Method (GDQM). The stresses and strains are obtained using the First-order Shear Deformable Theory (FSDT). Rule of the mixture is employed to obtain varying mass density and Poisson's ratio, while the module of elasticity is computed by modified Halpin-Tsai model. The external voltage is applied to sensor layer and a Proportional-Derivative (PD) controller is used for sensor output control. Governing equations and boundary conditions of the GPLRC cylindrical shell are obtained by implementing Hamilton's principle. The results show that PD controller, length to radius ratio (L/R), applied voltage, porosity and weight fraction of GPL have significant influence on the frequency characteristics of a porous GPLRC cylindrical shell. Another important consequence is that at the lower value of the applied voltage, the influence of the smart controller on the frequency of the micro composite shell is much more significant in comparison with the higher ones.

• Composites Research
• /
• 제14권1호
• /
• pp.39-46
• /
• 2001

본 논문에서는 신경망 제어기를 이용하여 복합재 보의 적응 다중 모드 진동 제어에 관한 실험적 연구를 수행하였다. 신경망 제어기는 계산량이 많기 때문에 실시간 적용에 어려움이 따른다. 본 논문에서는 진동 신호를 모드별로 분리하기 위한 적응 노치 필터를 제안하였다. 연결 강도의 개수가 적어서 계산량이 적은 두 개의 신경망 제어기를 이용하여 각 모드의 제어력을 계산하였다. 끝단 질량의 위치의 차이로 인해 고유 진동수가 다른 두 시편 A, B에 대하여 적응 노치 필터와 신경망 제어기를 이용한 적응 진동 제어를 수행한 결과, 두 경우 모두 효과적으로 진동 제어가 이루어졌다. 이러한 결과로 시스템 파라미터의 변환에 대한 신경망 제어기의 적응 진동 제어 성능을 확인할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권6호
• /
• pp.2050-2077
• /
• 2015

One of the major issues in emerging cloud management system needs the efficient service level agreement negotiation framework, with an optimal negotiation strategy. Most researchers focus mainly on the atomic service negotiation model, with the assistance of the Agent Controller in the broker part to reduce the total negotiation time, and communication overhead to some extent. This research focuses mainly on composite service negotiation, to further minimize both the total negotiation time and communication overhead through the pre-request optimization of broker strategy. The main objective of this research work is to introduce an Automated Dynamic Service Level Agreement Negotiation Framework (ADSLANF), which consists of an Intelligent Third-party Broker for composite service negotiation between the consumer and the service provider. A broker consists of an Intelligent Third-party Broker Agent, Agent Controller and Additional Agent Controller for managing and controlling its negotiation strategy. The Intelligent third-party broker agent manages the composite service by assigning its atomic services to multiple Agent Controllers. Using the Additional Agent Controllers, the Agent Controllers manage the concurrent negotiation with multiple service providers. In this process, the total negotiation time value is reduced partially. Further, the negotiation strategy is optimized in two stages, viz., Classified Similarity Matching (CSM) approach, and the Truncated Negotiation Group Gale Shapely Stable Matching (TNGGSSM) approach, to minimize the communication overhead.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.84-91
• /
• 2002

A new composite control method for a carriage balancing single inverted pendulum system is proposed and applied to swing up the pendulum and to stabilize it under the state constraint. The target inverted pendulum system has an extremely limited length of the cart(below 16cm). The proposed swing-up controller comprises a sliding mode control algorithm and an optimal control algorithm based on two regions: the region near the inverted unstable equilibrium position and the rest of the state space including the downward stable equilibrium position. The sliding mode controller uses a switching control action to converge along the specified path(hyperplane) derived from energy equation from a state around the path to desired state(standing position). An optimal control method is also used to guarantee the stability at unstable equilibrium position. Compared with the reported controllers, it is simpler and easier to implement. Experimental results are given to show the effectiveness of this controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.141-144
• /
• 2003

A composite adaptive dual fuzzy controller combining the approximate mathematical model, linguistic model description, linguistic control rules and identification modeling error into a single adaptive fuzzy controller is developed for a nonlinear system. It ensures the system output tracks the desired reference value and excites the plant sufficiently for accelerating the parameter estimation process so that the control performances are greatly improved. Using the Lyapunov synthesis approach, proposed controller is analyzed and simulation results verify the effectiveness of the proposed control algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.71.5-71
• /
• 2001

This paper presents the vibration control of a flexible intelligent beam with added mass. The materials which is a glass fiber reinforced(GFR) thermoplastic composite is employed to achieve vibration characteristics according to added mass induced end of composite beam. In the experiments of forced vibration control, the -controller are employed to achieve vibration suppression in forced vibration situations. Also, in the controller design, 1st and 2nd´s natural frequencies are considered in the modeling, because robust control theory which has robustness to structured uncertainty is adopted to suppress the vibration. By designing a controller using mu-synthesis, robust performance against measurement noise, various modeling.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1144-1150
• /
• 2013

The stabilizing controller design problem of time-delay singularly perturbed systems is considered. The proposed approach is based on the $H_{\infty}$ norm and the composite control method. A sufficient condition for the stability of the time-delay slow subsystem is presented. Using this condition, we can construct the composite control law for the time-delay singularly perturbed system and analysis the system by the matrix Lambert W function. Illustrated examples are presented to demonstrate the validity and applicability of the proposed method.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.369-382
• /
• 2014

A growing dynamic electrical demand has created an increasing interest in utilizing nonconventional energy sources like Photovoltaic (PV), wind power, etc. In this context, this paper focuses on the design and development of a composite power controller (CPC) in the decoupled double synchronous reference frame (DDSRF) combining the advantages of direct power control (DPC) and voltage oriented control (VOC) for a PV sourced grid connected inverter. In addition, a controller with the inherent active filter configuration is tested with nonlinear and unbalanced loads at the point of common coupling in both grid connected and autonomous modes of operation. Furthermore, the loss and reactive power compensation due to a non-fundamental component is also incorporated in the design, and the developed DDSRF model subsequently allows independent active and reactive power control. The proposed developed model of the controller is also implemented using MATLAB-Simulink-ISE and a Xilinx system generator which evaluate both the simulated and experimental setups. The simulation and experimental results confirm the validity of the developed model. Further, simulation results for the DPC are also presented and compared with the proposed CPC to further bring out the salient features of the proposed work.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1075-1085
• /
• 2018

To deal with the operation performance degradation of permanent magnet synchronous machine (PMSM) drives with uncertainties and unmodeled dynamics, this paper presents a finite-time nonlinear disturbance observer (FTNDO) based discretized integral sliding mode (DISM) composite control scheme. Based on the reaching-law approach, a DISM speed controller featuring a superior dynamic quality and global robustness against disturbances is constructed. This controller can avoid the reaching phase and overlarge control action. In addition, a sliding mode differentiator based FTNDO is devised and extended to the discrete-time domain for disturbance estimation. The attractive features of the FTNDO are that it can provide a finite-time converging estimation and alleviate the chattering effect in conventional sliding mode observers, while retaining robustness to parameter variations. By feeding the estimate forward to the pre-stage DISM controller, both disturbances and chattering can be significantly suppressed. Moreover, considering the estimation error of a FTNDO caused by discrete sampling, a stability analysis of the composite controller is discussed. Experimental results validate the superiority of the presented scheme.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.253-261
• /
• 2013

본 논문에서는 복합 비동기 순차 머신을 제어하는 방법을 다룬다. 논문에서 고려하는 비동기 머신은 입력/상태 머신 두 개가 직렬 결합된 것으로서 선행 머신의 출력 값이 후행 머신의 입력으로 전달된다. 제어 목적은 폐루프 시스템의 입력과 출력의 정상 상태 특성을 원하는 모델의 동작과 일치시키는 모델 정합 문제를 구현하는 교정 제어기를 꾸미는 일이다. 교정 제어기는 후행 머신의 상태 피드백 정보만 전달 받기 때문에 선행 머신의 상태를 정확하게 알 수 없는 불확실성이 존재한다. 본 논문에서는 그러한 불확실성 하에서 모델 정합 교정 제어기가 존재할 조건을 구하고 설계 알고리듬을 제안한다. 또한 사례 연구를 통해서 제안된 제어기의 설계 과정을 예시한다.