• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.90-96
• /
• 2011

In this study, the characteristic of fractured portion and shape on solder joints were investigated according to the thermal shock test for Automotive Application Component using Sn-3.0Ag-0.5Cu solder, which has a outstanding property as Lead-free solder. The value of pull and shear strength was decreased in principle after 432 cycles thermal shock test. In addition, fracture mode was verified by using EDS and SEM to observe fractured shape on the solder joints before and after thermal shock. In before thermal shock test, the fracture mode revealed typically solder layer's fracture mode. In after thermal shock test, we identified multiple fracture mode of the ductile and brittle fracture. Even though same composition of solder was used to experimental for estimating. the fracture mode varied on the fracture portion's height and the directional angles of shear strength. In conclusion, we identified that mechanical strength was affected on the solder layer's fracture mode.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.5
• /
• pp.245-256
• /
• 2017

This paper proposes a method to generate test scripts for testing embedded system in an easy manner by using hierarchical checklist. In the proposed method, a checklist is constructed with event, component and command dictionaries. And the test scripts are hierarchically generated based on the dictionaries. Since the physical layer of system input becomes abstract with component layer and event layer by virtue of the hierarchy, It is possible to generate test scripts without complicated system input information. It is easy to generate test scripts for embedded systems with similar inputs using the highly reusable dictionaries. The effectiveness of the proposed method is demonstrated with experiments.

• Communications for Statistical Applications and Methods
• /
• v.6 no.1
• /
• pp.11-24
• /
• 1999

In this paper we propose a method to test $\textit{H}$:$\rho_i$=$\gamma_i$ for 1$\leq$$\textit{i}$$\leq$$\ell$ against $\textit{K}$:$\rho_i$$\neq$$\gamma_i$ for some ｉin k-variance component random or mixed linear model where $\rho$i denotes the ratio of the i-th variance component to the error variance and $\ell$$\leq$K. The test which we call Rao-Wald test is exact and does not depend upon nuisance parameters. From a numerical study of the power performance of the test of the interaction effect for the case of a two-way random model Rao-Wald test was seen to be quite comparable to the locally best invariant (LBI) test when the nuisance parameters of the LBI test are assumed known. When the nuisance parameters of the LBI test are replaced by maximum likelihood estimators Rao-Wald test outperformed the LBI test.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.89-95
• /
• 2002

This paper considers the problem of estimating paramaters of the bivariate exponential distribution with a loaction parameter for a two-component shared parallel system using component data from system-level life test terminated at the time of the prespecified number of system failure. In the system-level life testing, there are three patterns of failure types; 1) both component failed 2) both component censored 3) one is failed and the other is censored. In the third case, we assume that the failure time might be known or unknown. The maximum likelihood estimators are obtained for the case of known/unknown failure time when the other component is censored.

• Journal of the Korean Statistical Society
• /
• v.30 no.3
• /
• pp.511-527
• /
• 2001

This paper consider the testing problem of variance component for the unbalanced tow=-way error component model. We provide a conditional LM test statistic for testing zero individual(time) effects assuming that the other time-specific(individual)efefcts are present. This test is extension of Baltagi, Chang and Li(1998, 1992). Monte Carlo experiments are conducted to study the performance of this LM test.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.423-429
• /
• 2020

In this paper, the electromagnetic compatibility (EMC) test standard is described, and the purpose and test configuration for the electromagnetic susceptibility (EMS) test of the missile component and the missile system are confirmed. The test configuration and specifications are suggested by the configuration of the missile component and the missile system based on the US military standards MIL-STD-461F and MIL-STD-464C, and explained that the ungrounded state, the final operating state of the missile component and the missile system, was constructed. In addition, the methods for checking the steady state and the points to be considered during the immunity test were introduced.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.842-847
• /
• 2010

Thermal analysis for the simulation of satellite component level thermal vacuum test processes was carried out by considering thermal vacuum test environment condition, thermal vacuum chamber configuration, and satellite's inner thermal environment. The transient analysis results can be obtained for the temperatures of component and thermal vacuum chamber assemblies. The thermal analysis model was verified with the component thermal environmental test results by using enhanced thermal vacuum chamber.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.21-26
• /
• 2018

This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.

• Journal of Applied Reliability
• /
• v.6 no.1
• /
• pp.27-36
• /
• 2006

It is increasingly important to ensure that a given vibration test specification of a particular machinery component is appropriately established by considering its real environmental conditions. Vibration test standards for electrical components are well documented, for example in an IEC 60068 series, while standards for machinery components are rarely found except a few military standards. Thus many vibration tests are performed based on the military standards. However, a test based on these military standards often results in over-testing, and under-testing in some cases due to the different environmental conditions. Also, these standards require an appropriate tailoring that may not be easily accomplished. In this paper, various international and military standards are compared and investigated to obtain test specifications relevant for machinery components. Also appropriate tailoring methods are demonstrated through a case study.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.6 s.39
• /
• pp.22-28
• /
• 2006

Operation of a microturbine was simulated on the basis of component characteristic parameters obtained from performance test. Characteristic parameters, such as compressor and turbine efficiencies, recuperator effectiveness as well as turbine inlet temperature, were obtained for a wide operation range. Component characteristics including performance maps and characteristic curves were generated using measured data. Based on the component characteristics, a simulation program was constructed and operation of the microturbine was simulated, and the simulated results were compared with the measured data to verify the program. Also, influence of variation in the power control scheme on the operating characteristic and performance of the engine was simulated. The simulation program can be used for predicting operation of both healthy and degraded engine conditions.