• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.226-231
• /
• 2014

Thin thermistor films of solutions with nickel and manganese oxides were prepared by metal-organic decomposition (MOD). The structural properties of the thin films were investigated as a function of annealing temperature. Field emission scanning electron microscope (FE-SEM) results indicated that the thin films had a thin thickness, smooth and dense surface. The crystallization temperature of $414.9^{\circ}C$ was confirmed from thermogavimetric-differential thermal analysis (TG-DTA) curve. A single phase of cubic spinel structure was obtained for the thin film annealed from $700^{\circ}C$ to $800^{\circ}C$, which was confirmed from the X-ray diffraction (XRD). From the selected area electron diffraction (SAED) in high resolution transmission electron microscope (HRTEM), the nano grains (2~3 nm) of spinel phase with (311) and (222) planes were detected for the thin film annealed at $500^{\circ}C$, which could be applicable to read-out integrated circuit (ROIC) substrate of the uncooled microbolometer with low processing temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.7
• /
• pp.452-457
• /
• 2014

Copper manganite thin films were fabricated on $SiN_x/Si$ substrate by metal organic decomposition (MOD) process. They were burned-out at $400^{\circ}C$ and annealed at various temperatures ($400{\sim}800^{\circ}C$) for 1h in ambient atmosphere. Their micro-structure and negative temperature coefficient of resistance (NTCR) characteristics were analyzed for micro-bolometer application. The copper manganite film with a cubic spinel structure was well developed at $500^{\circ}C$ which confirmed by XRD and HRTEM analysis. It showed a low resistivity ($47.5{\Omega}{\cdot}cm$) at room temperature and high NTCR characteristics of $-4.12%/^{\circ}C$ and $-2.15%/^{\circ}C$ at room temperature and $85^{\circ}C$, implying a good thin film for micro-bolometer application. Furthermore, its crystallinity was enhanced with increasing temperature to $600^{\circ}C$. However, the appearance of secondary phase at temperatures higher than $600^{\circ}C$ lead to deteriorate the NTCR characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.809-814
• /
• 2014

Spinel thin films were prepared by the spin spray technique to develop new thermal imaging materials annealed at low temperature for uncooled microbolometer applications. The spinel thin films were deposited from $[(Ni_{0.30}Co_{0.33}Mn_{0.37})_{1-x}Cu_x]_3O_4$ ($0.1{\leq}x{\leq}0.2$) solutions and then annealed at $400^{\circ}C$ for 1 h in argon. Effects of Cu content (x) and deposition time on the electrical properties of the annealed films were investigated. With increasing deposition time, the resistivity of the annealed films increased. For the annealed films deposited for 1 min, the resistivity of x=0.15 films was lower than that of x=0.1 films due to the different grain sizes. The high temperature coefficient of resistance (TCR) of the annealed films could be obtained at temperature below $50^{\circ}C$. Typically, the resistivity of $127{\Omega}{\cdot}cm$ and TCR of -5.69%/K at $30^{\circ}C$ were obtained for x=0.1 films with deposition time of 1 min annealed at $400^{\circ}C$ for 1 h in argon.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2016

In this study, we fabricated high quality color conversion component with green/red phosphor and low melting glass frit. The color conversion component was prepared by placing the green and red phosphor layer on slide glass via screen printing process. The properties of color conversion component could be controlled by changing coating sequence, layer thickness and heat treatment temperature. We discovered that optical properties of color conversion component were generally determined by the lowest layer. On the other hand, the heat treatment temperature also affected to correlated color temperature (CCT) and color rending index (CRI). The color conversion component with a green (lower) - red (upper) layer which was sintered at $550^{\circ}C$ showed the best optical properties: CCT, CRI and luminance efficacy were 3340 K, 78, and 56.5 lm/w, respectively.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.515-518
• /
• 2000

컴포넌트 소프트웨어 기술은 재사용성, 적시성, 유지 보수성 등이 업체의 경쟁력으로 대두되고 있는 정보 기술 업계에서 점차 각광을 받고 있다. 현재 다양한 컴포넌트 기반 개발 방법론 및 지원 도구들이 제공되고 있지만 각 방법론별 고유의 컴포넌트의 식별 방법을 기반으로 하고 있으며 포괄적인 컴포넌트 식별방법을 제공하는 방법론은 없다고 볼 수 있다. 이 논문에서는 현재 산업계에서 쓰이고 있는 여러 방법론과 한국전자통신연구원에서 개발하고 있는 컴포넌트 기반 개발방법론(FOCUS)에서 제안하고 있는 컴포넌트 식별 방법을 비교 분석하여, FOCUS에서는 보다 포괄적인 컴포넌트 식별 방법을 제공하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.237-242
• /
• 2015

$Bi_{0.5}(Na_{0.78}K_{0.22})_{0.5}TiO_3$ (BNKT) lead-free piezoelectric ceramics modified by $LaMnO_3$ (LM) were fabricated by conventional solid-state method. The crystal structure and the morphology of the lead free ceramics were analyzed by XRD (X-ray diffraction) and FE-SEM (Field Emission Scanning Electron Microscopy). The LM modified BNKT ceramics have a phase transition from ferroelectric tetragonal to non-polar pseudo-cubic. Despite decreases in the remnant polarization ($P_r$) and coercive field ($E_c$) in the P-E hysteresis loops, the electric-field induced strain properties were significantly enhanced by the LM modification. The highest value of $S_{max}/E_{max}=412pm/V$ at an applied electric field of 5 kV/mm was found in BNKT-0.01LM ceramic.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.105-109
• /
• 2014

Structure and electrical properties of $0.85NaNbO_3-0.15LiNbO_3$ ($(Li_{0.15}Na_{0.85})NbO_3$) ceramics were investigated as a function of sintering temperature. $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were prepared by conventional solid state processing. A main phase of the orthorhombic perovskite structure and secondary phase of $LiNbO_3$ were confirmed for all sintered specimens. Dense $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were obtained at sintering temperature above $1050^{\circ}C$. With increasing sintering temperature, the electromechanical coupling factor ($k_p$), piezoelectric constant ($d_{33}$) and relative dielectric constant (${\varepsilon}_r$) of the sintered specimens increased, while the mechanical quality factor ($Q_m$) decreased. These results are due to the increase of grain size and crystallite size of orthorhombic perovskite structure. Based on the temperature dependence of ${\varepsilon}_r$, stable piezoelectric properties were expected because no phase transition found up to $300^{\circ}C$. Typically, kp of 18%, $d_{33}$ of 34.7 pC/N, ${\varepsilon}_r$ of 135, and $Q_m$ of 62.8 were obtained for the specimens sintered at $1200^{\circ}C$ for 5 h.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.188-193
• /
• 1999

Technology of GIS evolved as a means of assembling and analyzing diverse spatial data. Many systems have been developed, and almost of systems are proprietary. There is a lots of lack of interoperability and reusability between them. This paper describes the development of Open GIS component software. The developing system have an end in view of GIS tool software which is interoperable and reusable. To increase the interoperability and reusability, the system is based on the OGC(Open GIS Consortium)'s Open GIS Simple Features Specification for OLE/COM. The OGC's specification is announced to increasing the full interoperability of various geospatial data and geoprocessing resources. With the Open specification, component based software ensures the reusability. We implement three kinds of component: Geometry component, Spatial Reference System Component, and MapBase Component. The first two components are compatible to the OGC's specification and the third one is designed to GIS tool software for variant GIS applications. The Open GIS component software system is developed on object-oriented computing environment, ATL/COM and Visual C++. As we made application programs using Visual Basic, the advantages of component based Open GIS software was proved.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.160-163
• /
• 2006

We have prepared crystalline Ag nanoparticles with an average size of 4 nm in diameter by using an inductively coupled plasma reactor equipped with the liquid nitrogen cooling system. Our magnetic data show that the nano-sized effect of Ag nanoparticles on the magnetic properties is ferromagnetic, instead of a diamagnetic component of the Ag bulk and a superparamagnetic component of magnetic nanoparticles. We have also studied the magnetic properties of Ag-Cu nanocomposites with an opposite concentration profile between surface and core. These comparisons indicate that the ferromagnetic component strongly depends on the surface of Ag nanoparticles, while the paramagnetic component is strongly affected by the outer oxide layer, with the background of a diamagnetic component from the core of Ag.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.489-492
• /
• 2001

소프트웨어의 대형화와 급격히 변화하는 소프트웨어 시장에 시기 적절히 대응하기 위해, 기존의 소프트웨어를 재사용함은 물론이고 재사용이 용이한 구조로 소프트웨어를 구성하여 다른 부분에 영향을 미치지 않고 특정 부분을 변경시킬 수 있는 솔루션이 요구된다. 이러한 기술에 부합되는 것이 재사용성, 대체가능성 등의 기능을 강조한 컴포넌트 기술이라 할 수 있겠다. 컴포넌트 기반 시스템을 설계하는데 있어서는 기존의 객체지향 접근방식을 포함하면서 컴포넌트의 고유의 특성을 반영하는 다른 접근방식을 필요로 하게 된다. 본 논문에서는 이러한 객체지향적 접근방식에 개념적인 컴포넌트 설계 방식과 이를 EJB 컴포넌트로 다시 상세화하는 컴포넌트의 모텔링 프로세스와 이를 지원하는 도구에 대해 다룬다.