• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.682-687
• /
• 2010

The IEEE 802.15.4a specification targets the low-rate (LR) Impulse-radio (IR) ultra-wideband (UWB) system which is now widely applied in the WPANs considering rather short distance communications with low complexity and power consumption. The physical (PHY) layer uses concatenated coding with mixed binary phase-shift keying and binary pulse-position modulation (BPSK-BPPM), and direct sequence spreading with time hopping in order that both coherent and non-coherent receiver architectures are supported. In this paper, the performances of multiple access schemes compliant with IEEE 802.15.4a specification are investigated with energy detection receiver, which allow avoiding the complex channel estimation needed by a coherent receiver. However, the performance of energy detection receiver is severely degraded by multi-user interference (MUI), which largely diminishes one of the most fascinating advantages of UWB, namely robustness to MUI as well as the possibility to allow parallel transmissions. So as to improve the performance of multiple access schemes, we propose to apply the novel TH sequences as well as to increase the number of TH positions. The simulation results show that our novel multiple access schemes significantly improve the performance against MUI.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1137-1144
• /
• 2002

Possibility of federation improvement requires flexibility and adaptability of member federates. Moreover, to develop and convert a non-HLA(High Level Architecture) compliant model as a HLA federate and allow this federate to be integrated with a changeable federation, more time and efforts will be necessary. In this research, I proposed a method to design and implement a ROM (RTI Object Model) Framework as a solution to this problem. ROM completely separates RTI (Run-Time Infrastructure) programming and simulation programming therefore providing epochal efficiencies in cost and productivity to the development a HLA federate that supports a changeable FOM. That is, ROM contains two layers : 1) a management layer that manages RTI services between the RTI and the federate and 2) a Foundation Class layer that actually updates/reflects objects and interactions. These two layers allow federate developers to use more generalized HLA services and automates the iterative, low-level RTI programming process.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.73-82
• /
• 1998

In silicon surface micro-machining, the newly developed GPE(gas-phase etching) process was verified as a very effective method for the release of highly compliant micro-structures. The developed GPE system with anhydrous HF gas and $CH_{3}OH$ vapor was characterized and the selective etching properties of sacrificial layers to release silicon micro-structures were discussed. P-doped polysilicon and SOI(silicon on insulator) substrate were used as a structural layer and TEOS(tetraethyorthdsilicate) oxide, thermal oxide and LTO(low temperature oxide) as a sacrificial layer. Compared with conventional wet-release, we successfully fabricated micro-structures with virtually no process-induced striction and residual product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.335-335
• /
• 2011

Instability of a thin film attached to a compliant substrate often leads to emergence of exquisite wrinkle patterns with length scales that depend on the system geometry and applied stresses. However, the patterns that are created using the current techniques in polymer surface engineering, generally have low aspect ratio of undulation amplitude to wavelength, thus, limiting their application. Here, we present a novel and effective method that enables us to create wrinkles with a desired wavelength and high aspect ratio of amplitude over wavelength as large as to 2.5:1. First, we create buckle patterns with high aspect ratio of amplitude to wavelength by deposition of an amorphous carbon film on a surface of a soft polymer poly(dimethylsiloxane) (PDMS). Amorphous carbon films are used as a protective layer in structural systems and biomedical components, due to their low friction coefficient, strong wear resistance against, and high elastic modulus and hardness. The deposited carbon layer is generally under high residual compressive stresses (~1 GPa), making it susceptible to buckle delamination on a hard substrate (e.g. silicon or glass) and to wrinkle on a flexible or soft substrate. Then, we employ glancing angle deposition (GLAD) for deposition of a high aspect ratio patterns with amorphous carbon coating on a PDMS surface. Using this method, pattern amplitudes of several nm to submicron size can be achieved by varying the carbon deposition time, allowing us to harness patterned polymers substrates for variety of application. Specifically, we demonstrate a potential application of the high aspect wrinkles for changing the surface structures with low surface energy materials of amorphous carbon coatings, increasing the water wettability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1183-1190
• /
• 2018

The environmental regulations are being strengthened all over the world, and the introduction of electric vehicles are actively being considered to cope with them effectively. It is essential to establish a charging infrastructure, which is an essential element of electric vehicle distribution. In this paper, power line communication technology essential for smart charging infrastructure is studied. A control board capable of achieving a physical layer speed of 10Mbps and a TCP/IP layer of 4.5Mbps, which conforms to the ISO/IEC 15118 international standard, and a control board mounted on the board and compliant with international standards. We have developed a software solution to perform functions for linking. In addition, in order to be applied to the combo-type DC fast charger, the hardware was designed to meet the industrial environment standard and the V2G communication module was developed by integrating it with the software solution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.91-101
• /
• 2014

In this study, we presented a timing verification method for a passenger car diesel engine management system (EMS) using measurement-based worst-case execution time (WCET) analysis. In order to cope with AUTOSAR-compliant software architecture, a development process model is proposed. In the process model, a runnable is regarded as a test unit and its temporal behavior (i.e. maximum observed execution time, MOET) is obtained along with on-target functionality evaluation results during online unit test. Furthermore, a cost-effective framework for online unit test is proposed. Because the runtime environment layer and the standard calibration environment are utilized to implement test interface, additional resource consumption of the target processor is minimized. Using the proposed development process model and unit test framework, the MOETs of 86 runnables for diesel EMS are obtained with 213 unit test cases. Using the obtained MOETs of runnables, the WCETs of tasks are estimated and the schedulability is evaluated. From the schedulability analysis results, the problems of the initially designed schedule table is recognized and it is fixed by redesigning of the runnable mapping and task offset. Through the various test scenarios, the proposed method is validated.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.53-60
• /
• 2014

IEEE 802.15.4 is one of the most widely adopted physical layer standards in the area of LR-WPAN(Low-Rate Wireless Personal Area Network). Numerous previous researches have contributed to deep insights on energy efficiency, transmission throughput, and reliability that IEEE 802.15.4 delivers to the LR-WPAN. As a research that is orthogonal and complementary to previous researches, we explore the implementation and practical performance evaluation of IEEE 802.15.4 MAC software. We implement the MAC software from the perspective of the networking stack, exploring the issues raised when the MAC software serves as a functional component in a complete networking stack consisting of MAC, network as well as well as application support layers. The performance is evaluated on a realistic experimental software environment integrated with operating system, networking stack, and applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.46-56
• /
• 2002

In this paper, we describe a hardware-software co-verification methodology and environment in developing a mobile station modem chip for cdma2000 1x which is one of the 3rd generation mobile communication standards. By constructing an efficient co-verification environment for a register-transfer-level hardware model and a physical-layer software model combining a channel link simulator and a versatile test-bench, we can drastically reduce both time and cost for developing a complex three-million-gate class system integrated circuit.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.472-477
• /
• 2018

In this paper, we develop interactive content services for preventing depression of users through an intelligent Internet of Things(IoT) mirror system. For interactive content services, an IoT mirror device measures attention and meditation data from an EEG headset device and also measures facial expression data such as "sad", "angery", "disgust", "neutral", " happy", and "surprise" classified by a multi-layer perceptron algorithm through an webcam. Then, it sends the measured data to an oneM2M-compliant IoT server. Based on the collected data in the IoT server, a machine learning model is built to classify three levels of depression (RED, YELLOW, and GREEN) given by a proposed merge labeling method. It was verified that the k-nearest neighbor (k-NN) model could achieve about 93% of accuracy by experimental results. In addition, according to the classified level, a social network service agent sent a corresponding alert message to the family, friends and social workers. Thus, we were able to provide an interactive content service between users and caregivers.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.872-883
• /
• 2013

In this paper, we design and analyze performance of Exclusive-OR based FEC (Forward error correction) system to deploy SVC video transmission service over packet-loss prone IP network. In the designed system, we adopt standard compliant Exclusive-OR based FEC scheme and apply it to be appropriate to the hierarchical layer structure of SVC video. To verify the performance of the designed Exclusive-OR based FEC system for SVC video transmission, we employ NIST-NET based transport simulator. By the SVC video transmission using the NIST-NET based simulator, we confirm the error resilient transmission performance of the designed Exclusive-OR based FEC system.