• Journal of Soil and Groundwater Environment
• /
• v.22 no.1
• /
• pp.13-17
• /
• 2017

Over 30% of domestic soil contamination has occurred via petroleum products and complex oil. Moreover, contamination by complex oil is more intense than it is by a single petroleum product species. In this study, we analyzed sectional TPH (total petroleum hydrocarbon) pattern and sectional ratio of current domestically distributed petroleum products, such as kerosene, diesel, bunker C, and lubricant and complex oils, to determine pollution characteristics of the soil. In the TPH pattern, kerosene, which is a light distillate, had an early retention time, and lubricant oil, which is a heavy distillate, had a late retention time in the gas chromatogram. In addition, we obtained a complexly contaminated soil via diesel and lubricant oil from the Navy and inspected it for its ratio of complex oil species. The inspection results showed that this soil was contaminated with 85% diesel and 15% lubricant oil. The method developed in this study could be used to determine complex petroleum sources and ratios at sites with accidentally contaminated soil.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.14-20
• /
• 2016

Remediation of crude oil contaminated soil is complicate and hard to apply traditional methods because of its persistency, durability, and high viscosity. Therefore, in this study, the efficiency of crude oil contaminated soil remediation was tested by developing a pilot-scale thermal desorption system using the indirect heating method with an exhaust gas treatment. Under optimal condition drawed by temperature and retention time, the remedial efficiency of crude oil contaminated soil and treatability of exhaust gas were analyzed. Total Petroleum Hydrocarbon (TPH) concentration of crude oil contaminated soil was decreased to 69.7 mg/kg on average and the remedial efficiency was measured at 99.60%. Through the exhaust gas, 86.0% of Volatile Organic Compounds (VOC) was degraded and 97.16% of complex malodor was reduced under the suggested optimum operation condition. This study provides important basic data to be useful in scaling up of the indirect thermal desorption system for the remediation of crude oil contaminated soil.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2018

A continuous process of persulfate oxidation and citric acid washing was investigated for ex-situ remediation of complex contaminated soil containing total recoverable petroleum hydrocarbons (TRPHs) and heavy metals (Cu, Pb, and Zn). The batch experiment results showed that TRPHs could be degraded by $Fe^{2+}$ activated persulfate oxidation and that heavy metals could be removed by washing with citric acid. For efficient remediation of the complex contaminated soil, two-stage and three-stage processes were evaluated. Removal efficiency of the two-stage process (persulfate oxidation - citric acid washing) was 83% for TRPHs and 49%, 53%, 24% for Cu, Zn, and Pb, respectively. To improve the removal efficiency, a three-stage process was also tested; case A) water washing - persulfate oxidation - citirc acid washing and case B) persulfate oxidation - citric acid washing (1) - citric acid washing (2). In case A, 63% of TRPHs, 73% of Cu, 60% of Zn, and 55% of Pb were removed, while the removal efficiencies of TRPHs, Cu, Pb, and Zn were 24%, 68%, 62%, and 59% in case B, respectively. The results indicated that case A was better than case B. The three-stage process was more effective than the two-stage process for the remediation of complex-contaminated soil in therms of overall removal efficiency.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.4
• /
• pp.13-20
• /
• 2010

The purpose of this study was to develope the remediation method of contaminated soils with metals and petroleum. The diesel degrading strain was isolated and identified from the soil contaminated by petroleum at industrial sites. Diesel biodegradation experiment was performed by diesel degrading bacteria in both solution and soil slurry. Contaminated soils by Zn or As and diesel were treated consecutively by steam-vapor extraction, biodegradation, and acid washing. The strain was identified as Pseudomonas aeruginosa, and named as Pseudomonas aeruginosa TPH1. The optimal culture conditions of TPH1 were $20^{\circ}C$ and pH 7.0, 3% of diesel concentration. Biodegradation of diesel was performed using the separated strain in liquid medium, and 63% of diesel was degraded in 72 hours. And 52% of diesel was removed in the tested soils. In the treatment of contaminated soils with diesel and Zn or As, 29% ~ 44% of diesel was reduced by steamvapor extraction, 60% ~ 71% of diesel was removed after biodegradation. 47% of Zn and 96% of As were removed after acid(mixture of sulfuric and oxalic acids) washing. It is recommended that consecutive treatment method of steam-vapor extraction, biodegradation and acid washing is effective for remediation of complex contaminated soils with metals and petroleum.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.94-103
• /
• 2014

In this study washing efficiency and desorption isotherms for heavy petroleum oil (HPO), Zn, and Pb bound to complex contaminated soils were examined using various soil flushing agents. Sodium dodecyl sulfate (SDS), methanol, ethylene diamine tetraacetic acid (EDTA), and citric acid were selected as soil flushing agents. 3% (w/v) and 4% SDS showed the highest removal efficiency for HPO, but the difference was not statistically significant (p > 0.05). Thus, 3% SDS was chosen as the best soil flushing agent for HPO. In the case of heavy metals, 0.1-M EDTA showed the highest removal efficiencies. But 0.05-M citric acid was selected due to its economic and eco-friendly strengths. The desorption isotherms obtained using Freundlich and Langmuir models indicated that the maximum desorption characteristics ($K_F$ and $Q_{max}$) of HPO with 4% SDS and 90% methanol and heavy metals with 0.1-M EDTA and 0.1-M citric acid, respectively, were markedly lower than in other cases. In addition, when 4% SDS and 90% methanol were used for HPO in the range of $C_e$ higher than 600 mg/L, and when 0.1M citric acid and 0.1M EDTA were used for Zn and Pb in the range of $C_e$ higher than 300 and 100 mg/L, respectively, the distribution constant converged to certain levels. Thus, constant values of $K_U$ and $K_L$ were determined. It was found that these constants represent the maximum desorption capacity and they can be used as distribution coefficients of desorption equilibrium for the flushing agents. The results of this study provided fundamental information for the selection of the best agents as well as for the process design and operation of soil washing/soil flushing of complex contaminated soils.

• Journal of Soil and Groundwater Environment
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2019

Clean soil environment is of crucial importance to sustain lives of ecosystem and humans. With rapid industrialization, there has been a great increase of soil contamination by accidental releases of petroleum products. In general, soil remediation is an expensive and time-consuming process as compared to cleanup of water and air. Moreover, determining the source and responsible parties of soil pollution often turns into legal conflicts and that further delay the cleanup process of contaminated sites. In practice, total petroleum hydrocarbon (TPH) analysis has been employed to determine the petroleum species and to track down the responsible polluters. However, this approach often suffers from differentiating similar TPH species. In this study, we analyzed TPH chromatogram patterns of 24 domestic petroleum products in specific carbon ranges (${\sim}C_{10}$, $C_{10}-C_{12}$, $C_{12}-C_{36}$, and $C_{36}{\sim}$) and the fractional changes of THP ratio in the mixture products of gasoline, kerosene and diesel. The proposed TPH analysis method in this study could serve as a useful tool to better analyze the petroleum species in soils contaminated with complex oil mixtures, and ultimately be used to identify the polluters of soil.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.39-46
• /
• 1996

For the purpose of development of bioremediation technology for soil contaminated by chlorinated phenols, this study was focused on the isolation and characterization of bacteria capable of degrading chlorinated phenols, the establishment of analytical methods for chlorinated phenols, and the investigation of the contaminated sites. One site near the Incheon Industrial Complex was identified as a pentachlorophenol (PCP)-contaminated spot. The soil brought from the PCP-contaminated site contained 10-100$mu\textrm{g}$/g wet soil of PCP. Many bacterial strains capable of growing on a minimal medium containing PCP were isolated from 15 soil samples collected throughout the land, and among them, 10 active isolates were finally selected for the further studies on the biodegradability and for the use in in situ bioremediation of contaminated soil. These isolates showed species-specific pattern in PCP-decrease and cell growth in a minimal medium containing 500-1,000mg/ιPCP. Strain Bul degraded 90% of PCP at 216 hrs after incubation. Expecially, strain Bu34 was capable of degrading 4,000mg/ι PCP and was identified as Pseudomonas putida Bu34. It is seemed that the isolated active bacteria could be effectively used for the bioremediation of PCP-contaminated sites.

• Journal of Environmental Health Sciences
• /
• v.32 no.6
• /
• pp.578-584
• /
• 2006

This research was conducted to estimate the effect of C/N ratio control on composting of TNT (2,4,6 trinitrotoluene)-contaminated soil. Glucose or acetone was selected to control C/N ratio of the contaminated soil. The C/N ratios of the controlled experiment and no controlled one were 26.0 and 6.6, respectively. During 45days, the degradation efficiency (96.0 or 91.8%) of acetone or glucose C/N ratio controlled soil was higher than that (78.4%) of no C/N ratio controlled case. The first order degradation rate constant of glucose or acetone C/N ratio control was 0.0641 or 0.0820/day. This constant was over twice 0.0356/day of no C/N ratio control. The C/N ratio control with glucose or acetone also showed a rather high $CO_2$ evolution than that without C/N ratio control. It was proven that C/N ratio control for composting of TNT-contaminated soil improved the treatment efficiency.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.1
• /
• pp.50-56
• /
• 2010

Oil contamination soil has been one of the most environmental social issues for decades in the inside and outside of country. The law of soil environmental preservation was carried out in the 1990s and the government controlled not only soil environment management and the remediation of contaminated soil but also promoted the development of remedial technology and cleanup business of contaminated soil by national policy. In addition to agriculture areas, the main oil contaminated sites are a gas station, oil reservoir, petro-chemical complex, site of railway carriage base and military camp. The contamination-frequency of agriculture area and effect sites are low but it has significantly important area on account of producing food for human beings. Therefore, we should be concerned about oil contamination damage of agriculture area. The oil contamination damage of agriculture area influenced drop of birth and breeding since the oil directly adheres to seeds and farm products even diffusion of contaminated soil to cultivation area. The studies of the crops and the food vegetation has not enough detailed data caused by the incident of oil contamination. This study investigated the effect of oil in germination and growth of selected plant seeds. In this study, we try to verify whether the oil contamination by accidents on farmland influenced the damage of farm produce and the mutual relation both oil contaminated soil or the vegetation of crops. The impact of oil on plant development was followed by phytotoxicity assessments. The plants exhibited visual symptoms of stress, growth reduction and perturbations in developmental parameters. The increase of the degree of pollution induced more marked effects in plants, likely because of the physical effects of oil. The relationships between the phytotoxicity contents of plants and growth reduction suggest a chemical toxicity of fuel oil. In addition, while cleaned up the contaminated soil under the standard of contaminated soil we examined it was suitable for region standard and it may have practical possibility for fill material of construction of afforestation and molding soil of landfill.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.5
• /
• pp.5-13
• /
• 2010

The research is intended to develop and verify a biological complex soil treatment process to treat and restore soil and groundwater which is contaminated with oil, heavy metals, and nutrients through experiments with the series of treatment process such as bioreactor, rolled pipe type of contact oxidation system(RPS), and chemical processing system. 5 microbial strains were separated and selected through experiment, whose soil purification efficiency was excellent, and it was noted that anion- and nonion-series of complex agent was most excellent as a surfactant for effectively separating oils from soils. Method to mix and apply selected microbes after treating the surfactant in the contaminated soil was most effective. The removal efficiencies of total petroleum hydrocarbon (TPH)-contaminated soil about 5,000mg/L and above 10,000mg/L were approximatly 90.0% for 28 days and 90.7% for 81 days by soil remediation system and the average removal efficiencies of BOD, $COD_{Mn}$, SS, T-N, and T-P in leachate were 90.6, 73.0, 91.9, 73.8, 65.7% by the bioreactor and RPS. The removal efficiency was above 99.0% by chemical processing system into cohesive agents.