• 한국표면공학회지
• /
• 제43권2호
• /
• pp.111-120
• /
• 2010

In this study, the effects of multi-complex agents addition on characteristics of electroless Ni plating solution are investigated. The species and the concentration of complexing agents are major factors to control the deposition rate, P concentration, and surface morphology of plating films. Adipic acid increases the deposition rate in regardless of single- or mutli-complex agent addition. However, lactic acid effectively increases the deposition rate in case of multi-addition as the complex agents with adipic or sodium succinate acid. In addition, sodium citric acid and malic acid show good stabilizing effects of plating solution and lowering the deposition rate, because they have high complexibility. Therefore, it is suggested that the development of Ni-P plating solution suitable for diverse usages can be carried out systematically using the database from this study.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.701-713
• /
• 2003

The BEM is a highly efficient method in the sense of economical computation. However, boundary integration is not easy for the complex geometry and moving surface, e.g. a rotating blade. Thus, Kirchhoff surface is designed in an effort to overcome the difficulty resulting from complex boundary conditions. A Kirchhoff surface is a fictitious surface which envelopes acoustic sources of main concern. Acoustic sources may be distributed on each Kirchhoff surface element according to their acoustic characteristics. In this study, an axial fan is assumed to have unsteady loading noise as a dominant source. Dipole sources can be modeled to solve the FW-H equation. Acoustic field is then computed by determining Kirchhoff surface on which near-field is implemented, to analyze the effect of Kirchhoff surface on it. The optimal shape and the location of Kirchhoff surface are discussed by comparing with experimental data acquired in an anechoic chamber.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1340-1342
• /
• 2003

In microwave remote sensing, the Fresnel reflectance formula is widely used in the sea surface emissivity modeling. As an essential contribution to microwave remote sensing, a new formula on the Fresnel reflectance has been derived based on our understanding of the complex index of refraction and continuity condition of E-M waves at the interface between two mediums. The proposed formula can be used to obtain the emissivity of sea surface, which is useful to retrieve sea surface temperature, sea surface salinity and the brightness temperature. Considering Bragg-resonant scatter, it is useful for the calculation of the normalized radar cross-section, and the retrieval of sea surface wind either.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.879-887
• /
• 2021

The nuclear supply chain attack surface is a large, complex network of interconnected stakeholders and activities. The global economy has widened and deepened the supply chain, resulting in larger numbers of geographically dispersed locations and increased difficulty ensuring the authenticity and security of critical digital assets. Although the nuclear industry has made significant strides in securing facilities from cyber-attacks, the supply chain remains vulnerable. This paper discusses supply chain threats and vulnerabilities that are often overlooked in nuclear cyber supply chain risk analysis. A novel supply chain cyber-attack surface diagram is provided to assist with enumeration of risks and to examine the complex issues surrounding the requirements for securing hardware, firmware, software, and system information throughout the entire supply chain lifecycle. This supply chain cyber-attack surface diagram provides a dashboard that security practitioners and researchers can use to identify gaps in current cyber supply chain practices and develop new risk-informed, cyber supply chain tools and processes.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.689-698
• /
• 2000

강우시 발생되는 강우유출수는 배수구역내 지표오염물질로부터 기인한 다양한 오엽물질을 포함하고 있으며 전세계적으로 이에 대한 많은 연구가 진행중에 있다. 초기강우시 신업공단에서 발생되는 지표유출수내 오염물질의 특성은 아직도 완벽하게 이해되지 못하고 있다. 일반적으로 분류식 배제방식이 채택된 공단에서 발생되는 우수유출수는 다양한 오염물질을 함유한 채 미처리 상태로 전량 지천으로 배출되고 있다. 본 연구는 산업공단을 대상으로 강우시 지표유출수의 수질과 특성을 분석 평가하였고 시료 채취는 공단을 배수구역별 4개 구역으로 구획 후 해당 배수구역에 대해 grab sampling 방법을 적용하였다. 석유 화학산업과 일반 야적장 등에서는 BOD, COD, SS, TN 등의 일반오염물 항목들이 주로 검출된 반면, 기계 금속산업, 고철 야적장 지역에서는 중금속항목의 오염물이 고농도로 측정되었다. 초기강우유출시 전 조사지점의 지표유출수에서 Fe, Zn, Cu 등의 항목이 주로 검출된 반면, Pb, As, Cd, Cr, Ni 등은 미량으로 검출되었고 Hg는 어느 지점에서도 검출되지 않았다. 산업공단에서 발생하는 지표유출수내 오염물질들은 대부분 업종과 연관성을 나타내었고, 각 지점별 발생 오염물질의 농도는 오염물질의 노출정도 및 강우사상의 특성에 따라 결정되어지는 것으로 나타났다.

• 한국환경과학회지
• /
• 제15권8호
• /
• pp.745-757
• /
• 2006

We focus on the improvement of accuracy of sea surface wind over complex coastal area doling the warm season. Local Analysis Prediction System (LAPS) was used to improve the initial values in Mesoscale Meteorological model (MM5). During the clear summer days with weak wind speed, sea surface wind simulated with LAPS was compared with the case without LAPS. The results of modeling with LAPS has a good agreement mesoscale circulation such as mountain and valley winds on land and in case of modeling without LAPS, wind speed overestimated over the sea in the daytime. And the results of simulation with LAPS indicated similar wind speed values to observational data over the sea under influence of data assimilation using BUOY, QuikSCAT, and AMEBAS. The present study suggests that MM5 modelling with LAPS showed more improved results than that of without LAPS to simulate sea surface wind over the complex coastal area.

• 한국환경과학회지
• /
• 제14권7호
• /
• pp.657-667
• /
• 2005

In this study, we focused on the improvements in the simulation of sea surface wind over the complex coastal area. MM5 model being currently used to predict sea surface wind at Korea Meteorological Administration, was used to verify the accuracy to estimate the local wind field. A case study was performed on clear days with weak wind speed(4 m/s), chosen by the analysis of observations. The model simulations were conducted in the southeastern area of Korea during the selected periods, and observational data such as AWS, buoy and QuikSCAT were used to compare with the calculated wind components to investigate if simulated wind field could follow the tendency of the real atmospheric wind field. Results showed that current operational model, MM5, does not estimate accurately sea surface wind and the wind over the coastal area. The calculated wind speed was overestimated along the complex coastal regions but it was underestimated in islands and over the sea. The calculated diurnal changes of wind direction could not follow well the tendency of the observed wind, especially at nighttime. In order to exceed the limitations, data assimilation with high resolution data and more specificated geographical information is expected as a next best policy to estimate accurately the environment of local marine wind field.

• 한국대기환경학회지
• /
• 제24권6호
• /
• pp.649-661
• /
• 2008

The impact of the detailed surface data on regional meteorological fields in complex coastal area is studied using RAMS. Resolutions of topography and land use data are very important to numerical modeling, because high resolution data can reflect correct terrain height and detail characteristics of the surface. Especially, in complex coastal region such as Gwangyang area, southern area in Korean Peninsula, high resolution topography and land use data are indispensable for accurate modeling results. This study investigated the effect of resolutions of terrain data using SRTM with 3 second resolution topography and KLU with 1 second resolution land use data. Case HR was the experiment using high resolution data, whereas Case LR used low resolution data. In Case HR, computed surface temperature was higher than Case LR along the coastline and wind speed was $1{\sim}2m/s$ weaker than Case LR. Time series of temperature and wind speed indicated great agreement with the observation data. Moreover, Case HR indicated outstanding results on statistical analysis such as regression, root mean square error, index of agreement.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.711-718
• /
• 2017

Poly(N-vinylcarbazole) (PVK)-cellulose triacetate (CTA) 복합체를 합성하고, 필름에 기공을 형성시킨 뒤, 화학적 환원법을 통해 은 나노입자를 부착하는 것을 연구하였다. PVK-CTA 복합체는 CTA-chloroform 용액에서 iron(III) chloride를 산화제로 사용하여 N-vinylcarbazole을 중합시켜 복합체를 합성하였고, 얻어진 복합체를 습한 환경에서 휘발성용매로 적셔 수증기를 적용하여 macropore가 균일하게 형성된 구조인 Honeycomb-pattern을 형성시켰다. 이후 환원제로 Tetrathiafulvalene (TTF)와 분산제로 polyvinylpyrrolidone (PVP)를 사용하여 화학적 환원법을 이용해 은 나노입자를 Honeycomb-pattern이 형성된 복합체 표면에 부착시켰다. FT-IR과 UV-Vis spectrometer을 이용하여 복합체의 형성여부를 확인하였고, N-vinylcarbazole의 함량을 달리하여 중합한 뒤 복합체의 열 분해도를 측정하였다. Scanning electron microscope (SEM)을 통해 복합체 표면에 형성된 기공의 균일도와 부착된 은 나노입자들의 분산성을 분석하였으며, 환원제, 분산제, 전구체 용액의 농도를 달리하여 은나노입자의 분산성을 확인하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.39-39
• /
• 2003