• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.523-533
• /
• 2015

Three-dimensional flow phenomena in a wire-wrapped 37-pin fuel assembly mock-up of a Japanese loop-type sodium-cooled fast reactor, Monju, were investigated with a numerical analysis using a general-purpose commercial computational fluid dynamics code, CFX. Complicated and vortical flow phenomena in the wire-wrapped 37-pin fuel assembly were captured by a Reynolds-averaged Navier-Stokes flow simulation using a shear stress transport turbulence model. The main purpose of the current study is to understand the three-dimensional complex flow phenomena in a wire-wrapped fuel assembly to support the license issue for the core design. Computational fluid dynamics results show good agreement with friction factor correlation models. The secondary flow in the corner and edge subchannels is much stronger than that in an interior subchannel. The axial velocity averaged in the corner and edge subchannels is higher than that averaged in the interior subchannels. Three-dimensional multiscale vortex structures start to be formed by an interaction between secondary flows around each wire-wrapped pin. Behavior of the large-scale vortex structures in the corner and edge subchannels is closely related to the relative position between the hexagonal duct wall and the helically wrapped wire spacer. The small-scale vortex is axially developed in the interior subchannels. Furthermore, a driving force on each wire spacer surface is closely related to the relative position between the hexagonal duct wall and the wire spacer.

• Clean Technology
• /
• v.13 no.3
• /
• pp.161-172
• /
• 2007

Fusion technology based on the nanotechnology should be introduced to clean technology for the breakthrough advances. Today, nanoparticles, nanotubes and other engineered nanomaterials are already in use in hundreds of everyday consumer products, and these materials are able to move around the human and environmental mediamore readily than larger particles of pollution. Because of their extremely small size and large surface area, nanoparticles are known to be more reactive and toxic than larger particles. Consequently, this feature raised many concerns of significant health, safety and environment. Herein, we reviewed risk assessment for health and environmental hazards of nanomaterials, and then revealed the potential hazardous of nanomaterials.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.661-674
• /
• 2002

The objective of this study is to develop efficient numerical method to enable solution of optimal control problems of Navier-Stokes flows and to apply these technique to the problem of viscous drag minimization on a bluff body by controlling boundary velocities on the surface of the body. In addition to the industrial importance of the drag reduction problem, it serves as a model for other more complex flow optimization settings, and allows us to study, modify, and improve the behavior of the optimal control methods proposed here. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. This study shows how reduced Hessian successive quadratic programming method, which avoid converging the flow equations at each iteration, can be tailored to these problems.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.409-418
• /
• 2014

Simulation of flow past a complex marine structure requires a fine resolution in the vicinity of the structure, whereas a coarse resolution is enough far away from it. Therefore, a lot of grid cells may be wasted, when a simple Cartesian grid system is used for an Immersed Boundary Method (IBM). To alleviate this problems while maintaining the Cartesian frame work, we adopted an Adaptive Mesh Refinement (AMR) scheme where the grid system dynamically and locally refines as needed. In this study, We implemented a moving IBM and an AMR technique in our basic 3D incompressible Navier-Stokes solver. A Volume Of Fluid (VOF) method was used to effectively treat the free surface, and a recently developed Lagrangian Dynamic Subgrid-scale Model (LDSM) was incorporated in the code for accurate turbulence modeling. To capture vortex induced vibration accurately, the equation for the structure movement and the governing equations for fluid flow were solved at the same time implicitly. Also, We have developed an interface by using AutoLISP, which can properly distribute marker particles for IBM, compute the geometrical information of the object, and transfer it to the solver for the main simulation. To verify our numerical methodology, our results were compared with other authors' numerical and experimental results for the benchmark problems, revealing excellent agreement. Using the verified code, we investigated the following cases. (1) simulating flow around a floating sphere. (2) simulating flow past a marine structure.

• The Korean Journal of Zoology
• /
• v.35 no.2
• /
• pp.149-160
• /
• 1992

Using the protein A-gold complex, the mvoabrillogenesis and actin localization of cultured myoblast were invastisated. In the superstructural changes of mvogenic cell during differentiation, pectoral myoblasts contained large nucleus and numerous ribosomes but no myofibrils during the first 24 hr of cultures. Mvoblast initiated to differentiate at 3-day of culture contained the primitive myofibrillar structure. At 96 hr of culture, the mvofibrillar structure showed reletively discernable Z band but pools defined A, H and M bands. The feature of sarcomeric structure showed more defined form at cultur 5 day. In the aspect of actin localization, actin wvas diffusely detected throughout the cytoplasm of myogenic cell and nucleus during the proliferating stage. At 72 hr of culture, with the appearantc oi primitive mvofibrils, gold particles were observed in surrounding of myofibrils but still presented in overall of cytoplasm, especially in the surface and lumen of endoplasmic reticulum. With the gradual increase of culture time, local distribution of actin was readily detected within cytoplasm. In the 5-day specimen of cultures, gold particles precisely indicate the sites of actin localifation within the sarcomere. These results indicate the time of onset of myofibrill appearance and the biosynthetic and incorporation pathway of actin molecules into sarcomeric structure during myofibrillogenesis. Thus, in the present study, the first mvoabrillar structure was detected at culture 3 day, and the initiation of assembly into a typical sarcmeric structure was observed at culture 5 day. It seems, however, that the course of events on myofibrillogenesis of cultured myoblasts can be changed with great dependence of culture conditions including the number and groluth rate of mononucleated mvoblasts after seeding although the fundamental process shows identical appearances.

• Membrane Journal
• /
• v.30 no.1
• /
• pp.9-20
• /
• 2020

Membranes are used in most processes of biopharmaceutical production. It is used for pretreatment of other processes, separation of impurities in the process, virus removal, control of products concentration and buffer solution exchange. Virus filters play an important role in ensuring product efficacy and stability because viral contamination of biopharmaceuticals for humans is a sensitive issue that is directly related to serious clinical outcomes. Virus filters typically have complex multilayer structures made of various polymers such as surface-modified PVDF, PES, CRC. Depending on the manufacturer, filters have different pore structures and shapes, such as symmetric or asymmetric, and is used in the form of pleated membrane, flat sheets or hollow fibers. Virus filters are exclusively supplied by few foreign companies such as Asahi Kasei, Millipore, Pall and Sartorius. Replacing virus filters can be time consuming and expensive, including approval from regulatory agencies through validation. As localization has become important due to Japan's recent export regulations, it is necessary to increase the degree of technical independence.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.164-172
• /
• 2019

In this paper, we implement a wheeled mobile robot that accurately and autonomously finds the optimal route from the starting point to the destination point based on computer vision in a complex indoor environment. We get a number of waypoints from the starting point to get the best route to the target through deep reinforcement learning. However, in the case of autonomous driving, the majority of cases do not reach their destination accurately due to external factors such as surface curvature and foreign objects. Therefore, we propose an algorithm to deepen the waypoints and destinations included in the planned route and then correct the route through the waypoint recognition while driving to reach the planned destination. We built an autonomous wheeled mobile robot controlled by Arduino and equipped with Raspberry Pi and Pycamera and tested the planned route in the indoor environment using the proposed algorithm through real-time linkage with the server in the OSX environment.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.80-90
• /
• 2017

To build tetrahedra mesh for FEM numerical analysis, Boundary Representation (B-Rep) model is required, which provides the efficient volume description of an object. In engineering, the parametric solid modeling method is used for building B-Rep model. However, a geological modeling generally adopts discrete modeling based on the triangulated surface, called a Sealed Geological Model, which defines geological domain by using geological interfaces such as horizons, faults, intrusives and modeling boundaries. Discrete B-Rep model is incompatible with mesh generation softwares in engineering because of discrepancies between discrete and parametric technique. In this research we have developed a converting program from Sealed Geological Model to Gmsh and COMSOL software. The developed program can convert complex geological model built by geomodeling software to user-friendly FEM software and it can be applied to geoscience simulation such as geothermal, mechanical rock simulation etc.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.2
• /
• pp.140-147
• /
• 2012

Microvascular reconstruction, in the oral and maxillofacial regions, is a widely accepted as the best way to overcome the complex oral cavity defects. Many patients requiring composite reconstructions have been treated previously with radiation therapy, chemotherapy, selective and/or functional neck dissection or any of these combinations. In many cases of these patients, inadequate neck vessels for the microanastomosis of free flap are available, due to a lack of recipient vessels in the neck, poor vessel quality or vessel caliber mismatch. To achieve a tension-free anastomosis, vein grafting must be considered to span the vessel gap between the free flap pedicle and the recipient neck vessels. Although most microsurgeons believed that interpositional grafts are to be avoided due to vessel thrombosis and increased number of necessary microanastomosis, we, authors have some confidence of equivalency between reconstruction with and without interpositional saphenous vein graft. The great saphenous vein, also known as the long saphenous vein, is the large subcutaneous superficial vein of the leg and thigh. It joins with the femoral vein in the region of femoral triangle at the saphenofemoral junction, and coursed medially to lie on the anterior surface of the thigh before entering an opening in the fascia lata, called the saphenous opening. For a better understanding of the great saphenous vein graft for the interpositional vessel graft in the oral cavity reconstructions, and an avoidance of any uneventful complications during these procedures, the related surgical anatomies with their harvesting tips are summarized in this review article in the Korean language.

• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.30-40
• /
• 2017

Purpose: Optical coherence tomography (OCT) is a noninvasive diagnostic technique that may be useful for both qualitative and quantitative analyses of the periodontium. Micro-computed tomography (micro-CT) is another noninvasive imaging technique capable of providing submicron spatial resolution. The purpose of this study was to present periodontal images obtained using ex vivo dental OCT and to compare OCT images with micro-CT images and histologic sections. Methods: Images of ex vivo canine periodontal structures were obtained using OCT. Biologic depth measurements made using OCT were compared to measurements made on histologic sections prepared from the same sites. Visual comparisons were made among OCT, micro-CT, and histologic sections to evaluate whether anatomical details were accurately revealed by OCT. Results: The periodontal tissue contour, gingival sulcus, and the presence of supragingival and subgingival calculus could be visualized using OCT. OCT was able to depict the surface topography of the dentogingival complex with higher resolution than micro-CT, but the imaging depth was typically limited to 1.2-1.5 mm. Biologic depth measurements made using OCT were a mean of 0.51 mm shallower than the histologic measurements. Conclusions: Dental OCT as used in this study was able to generate high-resolution, cross-sectional images of the superficial portions of periodontal structures. Improvements in imaging depth and the development of an intraoral sensor are likely to make OCT a useful technique for periodontal applications.