• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.123-135
• /
• 2013

The reflectance observed in the visible channels of a geostationary meteorological satellite can be used to calculate the amount of cloud by comparing the reflectance with the observed solar radiation data at the ground. Using this, the solar radiation arriving at the surface can be estimated. This study used the Meteorological Imager (MI) reflectance observed at a wavelength of 675 nm and the Geostationary Ocean Color Imager (GOCI) reflectance observed at similar wavelengths of 660 and 680 nm. Cloudy days during a typhoon and sunny days with little cloud cover were compared using observation data from the geostationary satellite. Pixels that had more than 40% reflectance in the satellite images showed less than 0.3 of the cloud index and blocked more than 70% of the solar energy. Pixels that showed less than 15% reflectance showed more than 0.9 of the cloud index and let through more than 90% of the solar energy to the surface. The calculated daily accumulated solar radiation was compared with the observed daily accumulated solar radiation in 22 observatories of the Korean Meteorological Administration. The values calculated for the COMS and MTSAT MI sensors were smaller than the observation and showed low correlations of 0.94 and 0.93, respectively, which were smaller than the 0.96 correlation coefficient calculated for the GOCI sensor. The RMSEs of MTSAT, COMS MI and GOCI calculation results showed 2.21, 2.09, 2.02 MJ/$m^2$ in order. Comparison of the calculated daily accumulated results from the GOCI sensor with the observed data on the ground gave correlations and RMSEs for cloudy and sunny days of 0.96 and 0.86, and 1.82 MJ/$m^2$ and 2.27 MJ/$m^2$, respectively, indicating a slightly higher correlation for cloudy days. Compared to the meteorological imager, the geostationary ocean color imager in the COMS satellite has limited observation time and observation is not continuous. However, it has the advantage of providing high resolution so that it too can be useful for solar energy analysis.

• Journal of Trauma and Injury
• /
• v.25 no.2
• /
• pp.49-56
• /
• 2012

Purpose: For determining the prognosis of critically injured patients, transporting patients to medical facilities capable of providing proper assessment and management, running rapid assessment and making rapid decisions, and providing aggressive resuscitation is vital. Considering the high mortality and morbidity rates in critically injured patients, various studies have been conducted in efforts to reduce those rates. However, studies related to diagnostic factors for predicting severity in critically injured patients are still lacking. Furthermore, patients showing stable vital signs and alert mental status, who are injured via a severe trauma mechanism, may be at a risk of not receiving rapid assessment and management. Thus, this study investigates diagnostic factors, including physical examination and laboratory results, that may help predict severity in trauma patients injured via a severe trauma mechanism, but showing stable vital signs. Methods: From March 2010 to December 2011, all trauma patients who fit into a diagnostic category that activated a major trauma team in CHA Bundang Medical Center were analyzed retrospectively. The retrospective analysis was based on prospective medical records completed at the time of arrival in the emergency department and on sequential laboratory test results. PASW statistics 18(SPSS Inc., Chicago, IL, USA) was used for the statistical analysis. Patients with relatively stable vital signs and alert mental status were selected based on a revised trauma score of more than 7 points. The final diagnosis of major trauma was made based on an injury severity score of greater than 16 points. Diagnostic variables include systolic blood pressure and respiratory rate, glasgow coma scale, initial result from focused abdominal sonography for trauma, and laboratory results from blood tests and urine analyses. To confirm the true significance of the measured values, we applied the Kolmogorov-Smirnov one sample test and the Shapiro-Wilk test. When significance was confirmed, the Student's t-test was used for comparison; when significance was not confirmed, the Mann-Whitney u-test was used. The results of focused abdominal sonography for trauma (FAST) and factors of urine analysis were analyzed using the Chi-square test or Fisher's exact test. Variables with statistical significance were selected as prognostics factors, and they were analyzed using a multivariate logistics regression model. Results: A total of 269 patients activated the major trauma team. Excluding 91 patients who scored a revised trauma score of less than 7 points, 178 patients were subdivided by injury severity score to determine the final major trauma patients. Twenty-one(21) patients from 106 major trauma patients and 9 patients from 72 minor trauma patients were also excluded due to missing medical records or untested blood and urine analysis. The investigated variables with p-values less than 0.05 include the glasgow coma scale, respiratory rate, white blood cell count (WBC), serum AST and ALT, serum creatinine, blood in spot urine, and protein in spot urine. These variables could, thus, be prognostic factors in major trauma patients. A multivariate logistics regression analysis on those 8 variables showed the respiratory rate (p=0.034), WBC (p=0.005) and blood in spot urine (p=0.041) to be independent prognostic factors for predicting the clinical course of major trauma patients. Conclusion: In trauma patients injured via a severe trauma mechanism, but showing stable vital signs and alert mental status, the respiratory rate, WBC count and blood in the urine can be used as predictable factors for severity. Using those laboratory results, rapid assessment of major trauma patients may shorten the time to diagnosis and the time for management.

• Journal of Korea Water Resources Association
• /
• v.50 no.7
• /
• pp.503-511
• /
• 2017

In order to estimate the demand for water resources planning and operation, methodology for determining the size of water supply facilities has been mainly applied to agricultural water, unlike living and industrial water, which reflects actual usage trends. This inevitably leads to an overestimation of agricultural water and can lead to an imbalance in the supply and demand of each use in terms of the total water resources plan. In this study, the difference of approaches of concept of net consumption was examined in comparison with the existing methodology and the characteristics of agricultural water demand were analyzed by applying it to whole Jeju Island. SWAT model was applied to estimate the amount of evapotranspiration, which is a key factor in estimating demand, and watershed modeling was performed to reflect geographical features, weather, runoff and water use characteristics of Jeju Island. For the past period (1992~2013), demand of Jeju Island as a whole was analyzed as 427 mm per year, and it showed a relatively high demand around the eastern and western coastal regions. Annual demand and seasonal variation characteristics of 10 river basins with watershed area of $30km^2$ or more were also analyzed. In addition, by applying the cultivated area of each crop in 2020 in the future, it is estimated that the demand corresponding to the 10-year frequency drought is 54% of the amount demanded in the previous research. This is due to the difference in approach depending on the purpose of the demand calculation. From the viewpoint of water resource management and operation, additional demand is expected as much as the net consumption. However, from the actual supply perspective, it can be judged that a facility plan that meets the existing demand amount is necessary. In order to utilize the methodologies and results presented in this study in practice, it is necessary to make a reasonable discussion in terms of policy and institutional as well as engineering verification.

• Journal of The Korean Association For Science Education
• /
• v.30 no.8
• /
• pp.1002-1016
• /
• 2010

The purpose of this study is to investigate beginner and experienced Korean science teachers' perceptions about the science teacher preparation courses from which they graduated, and to compare them. The study was conducted as a qualitative study using in-depth interviews. For the study, interview questions were developed by the authors based on the questionnaire of 'The IMPPACT project' that was being conducted in America. The interview tool includes questions about their experience of science subject matter content knowledge, science pedagogical content knowledge, and general pedagogical content knowledge in their preparation courses. For the interview, seven beginning science teachers, less than five years of teaching experience, and five experienced science teachers, more than five years of teaching experience, were sampled from secondary schools in Korea. The research results are as follows: First, most of the beginner and experienced science teachers perceived that the teaching methods in the classes of science subject matter were not good model for teaching science in their secondary school, because they were not diverse enough and entailed mostly knowledge transfer just through lecture without teacher-student interaction. Second, most of the beginner science teachers perceived that they were affected positively by the teaching strategies and evaluation methods in the classes for science pedagogical subject matter and they could apply those strategies and methods in their current science teaching. Lastly, most of the beginner and experienced science teachers perceived that general pedagogical subject matter is important and prerequisite for science teaching in their schools, but the courses that they experienced at their university were not appropriate for their current teaching.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.3
• /
• pp.315-324
• /
• 1996

The purpose of this study was to compare the specific binding ratio method with model-based methods in estimating the transporter parameter $k_3/k_4$ in normal controls and Parkinson's patients with [I-123]IPT SPECT and to evaluate the usefulness of [I-123]IPT SPECT. $6.5{\pm}1.1$ mCi ($239.0{\pm}40.3$ MBq) of [$^{123}I$]IPT was intravenouly injected as a bolus into six normal controls(age:$45{\pm}13$) and seventeen patients(age:$55{\pm}8$) with Pakinson's disease(PD). The transporter parameter $k_3/k_4$ was derived using the Ichise's graphical method($R_v$) and Lassen's area ratio method($R_A$) for the dynamic IPT SPECT data without blood samples. Then, the relationships between the transporter parameter $R-v,\;R_A$ and the ratio of (BG-OCC)/OCC at 115 minutes were evaluated by linear regression analysis. $R_vs$ by Ichise's graphical method for NC and PD were $2.08{\pm}0.29$ and $0.78{\pm}0.31$, respectively. $R_As$ by Lassen's area ratio method for NC and PD were $1.48{\pm}0.16$ and $0.65{\pm}0.24$, respectively. The correlation coefficients between (BG-OCC)/OCC and $R_v$, (BG-OCC)/OCC and $R_A$, and $R_v$ and $R_A$ were 0.93, 0.90, 0.99 and their corresponding slopes were 0.54, 0.34, and 0.65, respectively. The $R_v$ and $R_A$ of NC were significantly higher than the ones of PD. That is, the $k_3/k_4$ of NC was clearly separated from the one of PD. $k_3/k_4$ showed a good correlation with the ratio of (BG-OCC)/OCC. The results indicate that the noninvasive simplified quantitative methods may be useful to measure the transporter parameter $k_3/k_4$ and the specific binding ratio method can be used for quantitative studies of dopamine transporter with [I-123]IPT SPECT in humans brains.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.69-77
• /
• 2012

Surface insolation is one of the major indicators for climate research over the Earth system. For the climate research, long-term data and wide range of spatial coverage from the data observed by two or more of satellites of the same orbit are needed. It is important to improve the continuity and consistency of the derived products, such as surface insolation, from different satellites. In this study, surface insolations based on Geostationary Operational Environmental Satellite (GOES-9) and Multi-functional Transport Satellites (MTSAT-1R) were compared during overlap period using physical model of insolation to find ways to improve the consistency and continuity between two satellites through comparison of each channel data and ground observation data. The thermal infrared brightness temperature of two satellites show a relatively good agreement between two satellites : rootmean square error (RMSE)=5.595 Kelvin; Bias=2.065 Kelvin. Whereas, visible channels shown a quite different values, but it distributed similar tendency. And the surface insolations from two satellites are different from the ground observation data. To improve the quality of retrieved insolations, we have reproduced surface insolation of each satellite through adjustment of the Cloud Factor, and the Cloud Factor for GOES-9 satellite is modified based on the analysis result of difference channel data. As a result, the insolations estimated from GOES-9 for cloudy conditions show good agreement with MTSAT-1R and ground observation : RMSE=$83.439W\;m^{-2}$ Bias=$27.296W\;m^{-2}$. The result improved accuracy confirms that the modification of Cloud Factor for GOES-9 can improve the continuity and consistency of the insolations derived from two or more satellites.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.28-36
• /
• 2003

Purpose: To determine and to compare the effects of cyclic loading on the fixation strength of different femoral fixation methods in ACL reconstruction. Materials and Methods: Biomechanical test using an Instron(R) machine (Model No.5569. Mass, U.S.A) were carried out to compare the pull out strength of six different femoral fixation techniques after a cyclic loading in 72 Yorkshire pig knees. The graft-bone complex was cyclically loaded between 30N and 150N at 50 mm/min rate for 1000 cycles and maximal tensile testing was performed. A preload of 30N was applied to the graft along the axis of the tunnel 15 minutes. ANOVA and the Duncan multiple comparison test was used for the statistical analysis. Results: The mean maximum tensile strength of femoral fixation before and after the cyclic loading test were 1003.4$\pm$145N and 601.1$\pm$154N in hamstring-LA screw(R) group, 595.5$\pm$104N and 360.7$\pm$56N in hamstring-Bioscrew(R) group, 1431.7$\pm$135N and 710.7$\pm$114N in hamstring-Semifix(R) group, 603.6$\pm$54N and 459.1$\pm$46N in hamstring-Endobutton(R) fixation group, 1067.4$\pm$145 and 601.8$\pm$134N in the BPTB-Titanium interference screw group, and 987.1$\pm$168N and 588.7$\pm$124N in the BPTB-Bioscrew(R) group. And these data illustrated that cyclic loading reduces the maximum tensile strength by 40 $\%$, 39 $\%$, 50 $\%$, 24 $\%$, 44 $\%$, 40 $\%$ respectively. Conclusions: With the results of these experiments it should be emphasized that rehabilitation exercises after anterior cruciate ligament reconstruction should be executed with precaution as the repetitive flexion and extension of the knee would compromise the maximum tensile strength of the graft tendon.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.153-161
• /
• 2020

Arthrospira platensis is the oldest marine microalgae on the planet, is said to contain most of the nutrients needed by the human body. It's components are reported to contain a large amount of various substances such as phycocyanin, chlorophyll and β-carotene, and are known to have an aging and whitening effect. In this study, UVB-induced reactive oxygen species reduction efficacy and antioxidant activity of spirulina purified water extract were investigated. effect was confirmed by measuring DPPH radical scavenging activity, FRAP reducing power and ABTS⁺ radical scavenging activity of 0.05, 0.10, 0.50 1.0 mg/mL of spirulina purified water extract. The coagulation rate, hatching rate and heart rate toxicity were measured by treating spirulina purified water extract with 0.05, 0.10, 0.50 mg/mL concentration using Zebrafish, an alternative experimental animal model. UVB-induced ROS measurement was treated with spirulina extract at 0.05, 0.10, 0.50 mg/mL concentration, and then stained with DCFH-DA to confirm the inhibitory effect of ROS. As a result of measuring antioxidant effect, DPPH, FRAP and ABTS⁺ showed concentration-dependent antioxidant effects in comparison with ascorbic acid. and measuring the coagulation rate, hatching rate, and heart rate using Zebrafish, an alternative experimental animal, it was confirmed that there was no toxicity in 0.05 and 0.10 mg/mL except 0.5 mg/mL compared to the control group. The ROS scavenging activity of UVB-induced zebrafish showed higher ROS reduction than the positive control. The results of this study suggest that spirulina and purified water extracts are valuable for UV and skin protection cosmetics.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.411-418
• /
• 2007

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 mm diameter, 7 mm thickness) were made with same material. CIE $L^*a^*b^*$ value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, $L^*\;and\;b^*$ value showed the reducing tendency as they go toward the gingival area, but $a^*$ value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), $L^*\;and\;a^*$ value showed notable differences depending more on the measured areas than on the type of the teeth.