• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.558-564
• /
• 2016

The network interference gives positive and negative effects to security and QoS simultaneously by disturbing the decoding of receiver and eavesdropper. The transmission of artificial noise enables to indirectly control these contradicting effects. This paper proposed the secrecy enhancement technique via artificial noise with protected zones of transmitter and receiver and investigated its gain by using stochastic geometry. For given arbitrary artificial noise power ratio, we first analyzed connection outage probability and secrecy outage probability for four different scenarios (separated, overlapped, included secrecy protected zones- type A, B) according to distance and size of protected zones of the transmitter and receiver. We then derive the secrecy transmission rate and find the optimal artificial noise power ratio to maximize it. Finally, with numerical examples, we investigate the effects of the system parameters such as size of protected zones of transmitter and receiver on the optimal artificial noise power ratio.

• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.23-35
• /
• 2000

In this paper, the design for a PCS base station antenna which is using broadband method by a stacked structure has been studied. The sensitive parameters, such as the parasitic elements, the height of air layer between the upper and lower patch, and the variation of feed point, of the microstrip antenna that has stacked structure in a characteristics variation situation are classified and the characteristics has been investigated through the simulations. A designed antenna has following characters. Impedance bandwidth is Z57.5MHz(VSWR${\leq}$2), horizontal beamwidth is $64.1^{\circ}$, and gain is 14.7dBi. Therefore, it is confirmed the characteristics is good. In this paper, through the designing of a stacked microstrip antenna, we has investigated the availability for Korea PCS base station antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2326-2332
• /
• 2016

In this paper, the proposed small size PLL works stable with the discrete loop filter which is controlled by voltage controlled oscillator's output signal. A switch controlled loop filter is introduced into the proposed PLL instead of a conventional $2^{nd}$-order loop filter. Those three switches are controlled by the very high frequency output signal of voltage controlled oscillator. The switches are also controlled by UP/DN signals and 'on/off' depending the presence of UP/DN signals. A negative feedback functioned capacitor with a switch does make it possible to integrate the PLL into a single chip. The proposed PLL works stably even though a total of small 180pF capacitor used in the discrete loop filter. The proposed PLL has been designed with a 1.8V supply voltage, 0.18um multi - metal and multi - poly layer CMOS process and proved by Hspice simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.900-910
• /
• 2004

Route failure is mainly caused by mobility of mobile host in ad hoc networks. Route failure, which may lead to sudden packet losses and delays, is losing the route from source to destination. In this situation, TCP assumes that congestion has occurred within the network and also initiates the congestion control procedures. Congestion control algorithm provides the means for the source to deal with lost packets. TCP performance in ad hoc environments will be degraded as TCP source cannot distinguish congestion from route failure. In this paper, we propose TCP-P as pre-detection approach to deal with route failure. TCP-P freezes TCP through pre-detection of route failure. Route failure information of the proposed mechanism is obtained not by routing protocol but by MAC protocol. The intermediated node, obtaining route failure information by its MAC layer, relays the information to TCP source and lets TCP source stop the congestion control algorithm. Results reveal that TCP-P responding with proactive manner outperforms other approaches in terms of communication throughput under the presence of node mobility.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.2
• /
• pp.217-221
• /
• 2010

As the appearances of various new mobile devices and the explosive growth of mobile device users, many researches related to mobile P2P systems have been proceeded actively. In this paper, we propose a new search algorithm for the double-layered super peer system in the mobile environment. For the proposed search algorithm, we divide the entire experiment region into a grid of cells, each of which has the same size. The grid is configured properly by considering the communication range of a mobile device and the number of peers in the system. The proposed search algorithm is a partial flooding search method based on the directions of cells involved with the search. It reduces successfully the network traffic, but shows a low search hit ratio. To enhance the search hit ratio, we introduce a bridge-peer table for a super peer and utilize an n-way search. The experimental results show that the proposed algorithm made an average of 20~30% reduction in the number of message packets over the double-layered system. The success ratio was also improved about 2~5% over the double-layered system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.430-435
• /
• 2009

Spiropyran-doped organic-inorganic hybrid coatings were prepared starting from glycidoxypropyl triethoxysilane and vinyltriethoxysilane by a sol-gel method. They were applied as a thin layer to polycarbonate sheets and their photochromic properties were investigated. The effect of polarity of solvents dissolving the spiropyran was investigated on the photochromic properties. The decoloration rate of the spiropyran decreased with increasing the polarity of solvents dissolving the spiropyran because the open form of the spiropyran was easily stabilized in the polar gel matrix.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1641-1647
• /
• 2006

A dual micro gas sensor way for detecting reducing gas and bad order was fabricated using nano sized $SnO_2$ thin film fabrication method. To make nano-sized thin gas sensitive $SnO_2$ thin rilm, thin tin metal layer $2500{\AA}$ thick was oxidized between 600 and $800^{\circ}C$ by thermal oxidation. The gas sensing layers such as $SnO_2,\;SnO_2(+Pt)\;and\;SnO_2(+CuO)$ were patterned by metal shadow mask for simple fabrication process on the silicon substrate. The micro gas sensors with $SnO_2(Pt)$ and $SnO_2(+CuO)$ showed good selectivity to CO gas among reducing gases and good sensitivity to $H_2S$ that is main component of bad odor, separately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.315-322
• /
• 2002

A thin film oxide semiconductor micro gas sensor array which shows only 60㎽ of power consumption at an operating temperature of 30$0^{\circ}C$ has been fabricated using microfabrication and rnicrornachining techniques. Excellent thermal insulation of the membrane is achieved by the use of a double la! or structure of 0.1${\mu}{\textrm}{m}$ thick Si$_3$N$_4$ and 1${\mu}{\textrm}{m}$ thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric－pressure chemical-vapor deposition(APCVD), respectively. The sensor way consists of such thin film oxide semiconductor sensing materials as 1wt.％ Pd-doped SnO$_2$, 6wt.% AI$_2$O$_3$-doped ZnO, WO$_3$ and ZnO. The thin film oxide semiconductor micro gas sensor array exhibited resistance changes usable for subsequent data processing upon exposure to various gases and the sensitivity strongly depended on the sensing layer materials. Heater Part of the sensor structure has been modified in order to improve the process yield of the sensor, and as a result of modified heater structure improved process yield has been achieved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.493-503
• /
• 2000

There are two types of generators in the MHD generation : linear type Faraday and disk type hall generator. In this paper, it is experimented disk type hall generator. Disk type generator is driven by shock tube that compresses working gas isentropically in a very short time. As a working gas, helium gas seeded with cesium is used. it is difficult to confirm the whole condition thorough oかy experiment because the things happened in MHD generator is very complex. Furthermore we can't how exactly what happen at the inside of generator's channel because the time of generation is very short and working gas flows out very high speed. Expecially it is almost impossible to measure the things occurred in the boundary layer using MHD generation experimental equipment driven shock uk. With above reasons, to know certainly how the several values happened inside disk MHD generator charge, some graphs were drawn linearly through calculation using measured experimental data. For the more, other calculated results which can't be obtained by only experiment are considered in this paper. And these calculated results are compared to experiment data how exactly done the calculation.