• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.325-329
• /
• 2011

We are developing a minimized integrated public address system that has facilities such as external input, Mic., CD, MP3 and Radio. In this paper, developing an integrated public address system with operational MICOM will make it possible to control the facilities of digital devices centrally. The operational MICOM is composed of 3 layers which are a control layer, a processing layer and a user interface layer. The control layer controls digital devices in the integrated public address and the processing layer is for processing voice data editing, controlling signals of devices and providing status information of the device. The user interface layer displays the status of control devices and the data processing of a user. A remote control is used for the central control.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.6-11
• /
• 2008

An Indium Zinc Oxide(IZO) transparent conductive layer was deposited on a large size glass substrate by using magnetron dc sputtering method with varying a deposition temperature. As the deposition temperature decreased to a room temperature, the sheet resistance of IZO film increased. But this deposition temperature range is included in an applicable to a device. From a standpoint of the sheet resistance, the differences of the sheet resistance were not great and the uniformity of the layer was uniformed around 10%. Crystallization particles were shown on the surface of the layer as deposition temperature increased, but these particles were not shown on the surface of the layer as deposition temperature decreased to the room temperature. It didn't make a scrap of difference in a transmittance of varying deposition temperature. Therefore, it is concluded that IZO thin film manufactured by the room temperature deposition condition can be used as a large size transparent conductive layer of a liquid crystal display device.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.92-98
• /
• 2019

In this paper, we propose a deep learning system based on morphological neural network(MNN). The deep learning layers are morphological operation layer, pooling layer, ReLU layer, and the fully connected layer. The operations used in morphological layer are erosion, dilation, and edge detection, etc. Unlike CNN, the number of hidden layers and kernels applied to each layer is limited in MNN. Because of the reduction of processing time and utility of VLSI chip design, it is possible to apply MNN to various mobile embedded systems. MNN performs the edge and shape detection operations with a limited number of kernels. Through experiments using database images, it is confirmed that MNN can be used as a deep learning system and its performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3550-3566
• /
• 2020

As a widely used way to exfiltrate information, wireless covert channel (WCC) brings a serious threat to communication security, which enables the wireless communication process to bypass the authorized access control mechanism to disclose information. Unlike the covert channel on the network layer, wireless covert channels on the physical layer (WCC-P) is a new covert communication mode to implement and improve covert wireless communication. Existing WCC-P scheme modulates the secret message bits into the Gaussian noise, which is also called covert digital communication system based on the joint normal distribution (CJND). Finding the existence of this type of covert channel remains a challenging work due to its high undetectability. In this paper, we exploit the square autocorrelation coefficient (SAC) characteristic of the CJND signal to distinguish the covert communication from legitimate communication. We study the sharp increase of the SAC value when the offset is equal to the symbol length, which is caused by embedding secret information. Then, the SAC value of the measured sample is compared with the threshold value to determine whether the measured sample is CJND sample. When the signal-to-noise ratio reaches 20db, the detection accuracy can reach more than 90%.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.549-550
• /
• 2006

It has become topic continuously at MEMS or semiconductor process to form three-dimensional multilayer structure. In this paper, we devised the new polymer pattern method that has multilayer structure. This is method that uses different kind of polymeric material. Specially, polymers used in this study that we propose became all pattern by photolithography, prevented that process increases. Here, polymer that we use used polymer of epoxy order called "SU-8" and polymer of novolak resin called "AZ-1518". The result, "SU-8" was formed pattern to 3.5um thickness, and "AZ-1518" about pattern 3um thickness. Also, It was been 6um thickness at same pattern area.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2923-2943
• /
• 2021

The double helix structure of DNA makes it diverse, stable and can store information with high density, and these characteristics are consistent with the requirements of molecular communication for transport carriers. In this paper, a specific structure of molecular communication system based on DNA length coding is proposed. Transmitter (Tx) adopts the multi-layer golden foil design to control the release of DNA molecules of different lengths accurately, and receiver (Rx) adopts an effective and sensitive design of nanopore, and the biological information can be converted to the electric signal at Rx. The effect of some key factors, e.g., the length of time slot, transmission distance, the number of releasing molecules, the priori probability, on channel capacity is demonstrated exhaustively. Moreover, we also compare the transmission capacity of DNA-based molecular communication (DNA-MC) system and concentration-based molecular communication (MC) system under the same parameter setting, and the peak value of capacity of DNA-MC system can achieve 0.08 bps, while the capacity of MC system remains 0.025 bps. The simulation results show that DNA-MC system has obvious advantages over MC system in saving molecular resources and improving transmission stability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.141-150
• /
• 2011

In this paper, we propose a Cross-Layer Cooperative Routing(CLCR) architecture to support transmission efficiency in mobile wireless sensor networks. The main features and contributions of the proposed architecture and method are as follows. First, the clustering which uses the location information of nodes is utilized as infrastructure. Second, a cross-layer strategy which uses the technologies of network layer, MAC layer, physical layer together to support transmission efficiency and channel efficiency for cooperative-aided routing and transmission. Third, we consider realistic approach in the view points of the mobile ad-hoc wireless sensor networks while conventional methods just consider fixed sensor network environments. The performance evaluation of the proposed method is performed via simulation using OPNET and theoretical analysis. The results of performance evaluation of the proposed CLCR show improvement of transmission efficiency by the proposed CLCR.

• Journal of Korea Multimedia Society
• /
• v.19 no.12
• /
• pp.1992-1999
• /
• 2016

In layered communication architecture, each layer is designed to service its own functions to higher layer while getting serviced by lower layer. Usually layered architectures are not optimized in a total view of whole services and functions. So cross layer design pursues performance enhancements by optimizing in various ways. In LTE, MAC layer uses HARQ mechanism and RLC layer uses ARQ mechanism for retransmission. According to the 3GPP 36.331 specification, two layers' cooperation may not happen in an optimized way. This paper suggests an adaptive MAC layer approach which RLC layer's function might be initiated in MAC layer in advance to utilize MAC layer's idling wasting time for RLC layer's next decision. This adaptive ARQ method in MAC layer speeds up the next retransmission and reduces the overall transmission time. Emulation shows the improved performance in total retransmission time and retransmission success ratio. In wireless shadow area, the retransmission occurs frequently. Our approach has strong points in this poor wireless condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.458-458
• /
• 2013

We investigated a study on the thermal degradation of boron doped zinc-oxide (BZO) layer which used as a transparent conducting layer on the Cu (In1-xGax) Se2 (CIGS) based thin film solar cells. Devices were annealed under the temperature of $100^{\circ}C$ or 100 hours and then Hall measurement was carried out to characterize the parameters of mobility (${\mu}Hall$), resistivity (${\rho}$), conductivity (${\sigma}$) and sheet resistance (Rsh). The initial values of ${\mu}Hall$, ${\rho}$, ${\sigma}$ and Rsh were $29.3cm^2$/$V{\cdot}s$, $2.1{\times}10^{-3}{\Omega}{\cdot}cm$, $476.4{\Omega}^{-1}{\cdot}cm^{-1}$ and $19.1{\Omega}$/${\Box}$ respectively. After the annealing process, the values were $4.5cm^2$/$V{\cdot}s$, $12.8{\times}10^{-3}{\Omega}{\cdot}cm$, $77.9{\Omega}^{-1}{\cdot}cm^{-1}$ and $116.6{\Omega}$/${\Box}$ respectively. We observed that ${\mu}Hall$ and ${\sigma}$ were decreased, and ${\rho}$ and Rsh were increased. In this study, BZO layer plays an important role of conducting path for electrons generated by incident light onthe CIGS absorption layer. Therefore, the degradation of BZO layer characterized by the parameters of ${\mu}Hall$, ${\rho}$, ${\sigma}$ and Rsh, affect to the cell efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.58-65
• /
• 2016

Satellite communication is a wide area network (WAN) which provides communication service worldwide. However, the performance of TCP can be seriously degraded in the satellite networks due to limited bandwidth, long round-trip time (RTT) and high bit error rate (BER) over satellite links. In order to improve the performance of TCP, this paper proposes cross-layer Performance Enhancing Proxy (PEP) in digital video broadcasting-return channel via satellite (DVB-RCS) networks. The proposed protocol sets TCP Congestion Window (CWND) size by using satellite resource allocation information exchanged between TCP and the link-layer. we implement PEP testbed based on Linux to evaluate the performance of the proposed protocol. The simulation results show that the proposed protocol performs better than standard TCP both in single and multiple sessions in variant BER, because the proposed protocol sets TCP CWND size by using satellite resource allocation.