• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.1-12
• /
• 1999

This paper illustrates and analyzes system structure, link budget and cell coverage to accommodate Korea environment about LMDS systems that are expected to play an important role as the future wireless infrastructure of the information superhighway. In the mean time, many parameters used for the analysis apply to the allocated frequency bandwidth (Up-stream : 24.25GHz-24.75GHz, Down-stream : 25.5GHz-27.5GHz) of Ministry of Information and Communication. The modem and channel coding must be developed to accommodate specifications of DAVIC protocol. The materials about atmospheric phenomena refer to apply specifications of ITU-R. This paper will be need to disign the network structure and system configuration of LMDS system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.297-302
• /
• 2011

Recently, low temperature co-fired ceramic (LTCC) technology is widely used in sensors, actuators and microsystems fields because of its very good electrical and mechanical properties, high reliability and stability as well as possibility of making 3D micro structures. In this study, we investigated the effects of sputtering gas ratio and annealing temperature on the crystal structure of $Pb(ZrTi)O_3$ (PZT) thin films deposited on LTCC substrate. The LTCC substrate with thickness of $400\;{\mu}m$ were fabricated by laminating 4 green tapes which consist of alumina and glass particle in an organic binder. The PZT thin films were deposited on Pt / Ti / LTCC substrates by RF magnetron sputtering method. The results showed that the crystallization of the films were enhanced as increasing $O_2$ mixing ratio. At about 25% $O_2$ mixing ratio, was well crystallized in the perovskite structure. PZT thin films was annealed at various temperatures. When the annealing temperature is lower, the PZT thin films become a phyrochlore phase. However, when the annealing temperature is higher than $600^{\circ}C$, the PZT thin films become a perovskite phase. At the annealing temperature of $700^{\circ}C$, perovskite PZT thin films with good quality structure was obtained.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.48-56
• /
• 2007

OFDMA (Orthogonal Frequency Division Multiple Access) is widely used as multiple access techniques for next generation mobile communication systems. However, OFDMA has a disadvantage of high peak-to-average power ratio and SC-FDMA (Single-Carrier Frequency Division Multiple Access) was proposed for uplink systems to overcome the drawback. SC-FDMA also has several demerits including degraded performance with high-order modulations or with multiple antenna techniques, and less flexibility in resource allocation and pilot patterns. In order to achieve the best performance over a wide range of environments, each mobile station should select either of OFDMA and SC-FDMA according to the given condition and a pilot structure for SC-FDMA systems should be similar to that of OFDMA to maintain the same frame structure. While conventional SC-FDMA schemes require an entire SC-FDMA symbol or a separate short symbol for pilots, this paper proposes a method which supports the pilots included in SC-FDMA data parts and enables a SC-FDMA frame to hold the same structure as an OFDMA frame.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.478-485
• /
• 2007

In this paper, an unequal 1:N Wilkinson power divider with adjustable dividing ratio is proposed. The proposed unequal power divider is composed of basic Wilkinson structure. It consists of rectangular-shaped defected ground structure (DGS), isolated island pattern in DGS, and varactor diodes of which capacitance depends on bias voltage. The characteristic impedance value of microstrip line having DGS goes up and down by controlling bias voltage for diodes, and consequently the power dividing ratio(N) is adjusted. The obtained N from measurement is $2.59{\sim}10.4$ which mean the proposed divider has adjustable unequal dividing ratio.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.54-63
• /
• 2023

In this paper, a VHF band conformal antenna for UAV mounting was developed. The proposed antenna was designed as an shape-adaptive structure by minimizing the antenna height to be advantageous in RCS reduction performance. As for the antenna radiator, the outer radiator was arranged around the inner radiator to apply the CRLH zeroth-order resonance structure. With this structure, the height of the antenna was minimized, and it was reduced by about 70 % compared to the existing blade antenna. In addition, for impedance matching, the intermediate frequency bandwidth of the VHF band was improved through the sleeve pin of the inner radiator, and the low frequency bandwidth of the VHF band was improved by applying an EMI shielding gasket to the shorting pin of the outer radiator. The proposed antenna was manufactured and measured to verify the performance of the device and the performance after UAV mounting. As a result, the standard was satisfied for the operating frequency.

• Smart Media Journal
• /
• v.13 no.4
• /
• pp.76-85
• /
• 2024

In this paper, we propose a system that improves the data integrity of IoT(Internet of Things) devices in the virtual environment by combining Hyperledger Indy and MQTT(Message Queuing Telemetry Transport). The system complements the limitations of the centralized system by realizing a DPKI(Decentralized Public Key Infrastructure) structure that utilizes a distributed network in publish-subscribe(pub/sub) pattern communication. Digital signature technology was applied to ensure the data integrity of IoT devices and communication scenarios between the four core components of the client, IoT device, broker, and blockchain, as well as a topic structure using a decentralized identifier to ensure safety in the virtual environment. We present a systematic method for transparent data exchange. To prove the performance of the proposed system, this paper conducted experiments on four scenarios and evaluated communication performance in a virtual environment. The experimental results confirmed that the proposed system provides a reliable IoT data communication structure in a virtual environment.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1988.10a
• /
• pp.257-261
• /
• 1988

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1985.10a
• /
• pp.202-205
• /
• 1985

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1284-1287
• /
• 2007

Titanium dioxide ($TiO_2$) is promising candidate for fabricating blocking layer of gate dielectrics in non-volatile memory (NVM). In this work, we investigated $TiO_2$ as high dielectric constant material instead of silicon dioxide ($SiO_2$), which is generally used as blocking layer for NVM.

• Cross-Cultural Studies
• /
• v.27
• /
• pp.347-386
• /
• 2012

This article aims to establish the model of textual communication and its schema. To do this, we must identify the characteristics of textual communication, different from that of the oral, because the model of communication is usually done to show the structure of oral communication. Moreover, we must clarify the status text as '${\acute{e}}nonc{\acute{e}}$', that is to say product of the act of enunciation. The study of the text has now reached to achieve from the perspective of pragmatics, overcoming the structural point of view that dominates long text linguistics. And now, we need to enrich the theoretical basis of the pragmatics of text. Then the search of elements necessary to develop the model and pattern of textual communication can help to establish the elements used to form the theoretical basis. To clarify the characteristics of textual communication, we needed to explain the present communication by the position of reader and the point of view of textual reference. The schema that we proposed is not perfect, but there are still issues to think to complete it. For example, one must take into account the plurality of readers and reflect the relationship between interpretive texts in this schema, etc. This kind of problem is not only required to complete the schema but also to strengthen the basis of the theory of textual communication and the pragmatics of text.