• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.219-223
• /
• 2019

Background: Ice cooling vests can cause tissue damage and have no flexibility. Therefore, these two undesirable properties of ice cooling vest were optimized, and the present study was aimed to compare the impact of the optimized ice cooling vest and a commercial paraffin cooling vest on physiological and perceptual strain under controlled conditions. Methods: For optimizing, hydrogel was used to increase the flexibility and a layer of the ethylene vinyl acetate foam was placed into the inside layer of packs to prevent tissue damage. Then, 15 men with an optimized ice cooling vest, with a commercial paraffin cooling vest, and without a cooling vest performed tests including exercise on a treadmill (speed of 2.8 km/hr and slope of %0) under hot ($40^{\circ}C$) and dry (40 %) condition for 60 min. The physiological strain index and skin temperature were measured every 5 and 15 minutes, respectively. The heat strain score index and perceptual strain index were also assessed every 15 minutes. Results: The mean values of the physiological and perceptual indices differed significantly between exercise with and without cooling vests (P < 0.05). However, the difference of the mean values of the indices except the value of the skin temperature during the exercises with the commercial paraffin cooling vest and the optimized ice cooling vest was not significant (P > 0.05). Conclusions: The optimized ice cooling vest was as effective as the commercial paraffin cooling vest to control the thermal strain. However, ice has a greater latent heat and less production cost.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.29-33
• /
• 2012

We demonstrated the viability of fully microfabricating SWCNT(single-wall carbon nanotube) film strain sensors for force and weight sensing. Our spray-deposited SWCNT film strain sensors showed good linearity over a range from 0 to 400 microstrain, and much higher sensitivity compared to commercial metal foil-type gauges. The number of grids and the thickness of the SWCNT film were found to have a significant effect on the strain sensing properties of the SWCNT film gauges. A strain sensing methode for the CNT-based strain gauges was also investigated using a binocular type beam load cells. Preliminary results indicate that the microfabrication method shown here is promising for developing a commercial strain gauge using a spray-coated SWCNT thin film. In the near future, various studies will be performed to further enhance the properties of the spray-coated SWCNT film strain sensors.

• Korean Journal of Poultry Science
• /
• v.17 no.1
• /
• pp.7-15
• /
• 1990

The present study was undertaken to determine the effect of different body hair color (Native type) and commercial white laying hen (Improvement, Nick Chick strain) on cholesterol, triglyceride and protein concentration in serium. Experimental hens were selected out of yellow-brown body hair color strain (10 heads), green-black body hair color strain (13 heads), white body hair color strain (7 heads), black-bone strain (10 heads) as native type and commercial white laying hen (30 head,3) as improved variety. Experimental diet was fed identically for 4 weeks in total groups. The results of the experiment obtained were summerized as follows：1. Serium cholesterol contents were the highest in commercial white laying hen ($172.50\pm$13.45 mg/100 $m\ell$) (p＜0.01;, and higher in white color strains than body hair color strain groups. Body hair color strain groups were similar in serium cholesterol contents. 2, Serium triglyceride concentration also showed no response among native type groups, however commercial white laying hen group shelved significatly difference. (p＜0.01) 3. Serium protein contents were the highest in commercial white laying hen group ($6.24\pm$0.23 mg/100 $m\ell$). (p＜0,01) Increasing the serium cholesterol, triglyceride and protein contents in commercial white laying hen group than color strain group of native type was considered to improved grade.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.372-379
• /
• 2006

Little attention has been paid to static-strain-dependence of dynamic complex modulus of viscolelastic materials in computational analysisso far. Current commercial Finite Element Method (FEM) codes do not take such characteristics into consideration in constitutive equations of viscoelastic materials. Recent experimental observations that static-strain-dependence of dynamic complex modulus of viscolelastic materials, especially filled rubbers, are significant, however, require that solutions somehow are necessary. In this study, a simple technique of using a commercial FEM code, ABAQUS, is introduced, which seems to be far more cost/time saving than development of a new software with such capabilities. A static-strain-dependent correction factor is used to reflect the influence of static-strains in Merman model, which is currently the base of the ABAQUS. The proposed technique is applied to viscoelastic components of rather complicated shape to predict the dynamic stiffness under static-strain and the predictions are compared with experimental results.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.106-112
• /
• 2008

International conferences to block the spread of Avian bird flu occurred in Beijing, 2006 and others warned of the seriousness of the H5N1 strain. The meetings succeeded in generating billions of dollars from USA, EU and World Bank. Migratory birds seem to play a major role in the spread of the aggressive strain globally from Asia to Europe and Africa. Experiences of tolerance breeding of maize (Zea mays L.) for four decades against 20 biotic stresses suggest that the prime cause of the occurrence of H5N1 strain was due to the human beings' counter-efforts against nature. Excessive use of chemicals (spray and injection) in the commercial poultry farms had created high selection pressure on virus. The new strain had mutated for survival. Attempting to eliminate the virus by chemicals for 100% control is a dangerous way to control biotic stresses. This can create more aggressive strains. A solution would be to build up tolerability of the commercial animals against the virus. Improvement of poultry cage environments and respect for nature must be integrated. Potential foes must be watched.

• Journal of Applied Biological Chemistry
• /
• v.54 no.4
• /
• pp.252-257
• /
• 2011

To remove excess nitrate from the agricultural environments, Enterobacter amnigenus GG0461 has been isolated as a bacterial strain having high capability of nitrate uptake activity. This strain was able to remove nitrate more than 3,000 ppm (50 mM) in the Pseudomonas agar F (PAF) medium. Therefore, it could be a candidate strain for a nitrate scavenger in the various contaminated environments, such as agricultural soils, livestock sewage, and industrial wastewater. In order to develop medium for the large-scale production of the strain GG0461, each component of PAF medium was replaced with the corresponding commercial product and the optimal conditions for bacterial growth and nitrate uptake activity were measured. Glycerol was replaced with the commercially available product and the nitrogen source was substituted with commercial tryptone, yeast extract, soybean meal, and fermented fish extract. Bacterial growth and nitrate uptake activity were maximal in the media containing 2% tryptone, followed by yeast extract, soybean meal, and fermented fish extract. The pH of the growth medium containing 2% tryptone was decreased by the bacterial nitrate uptake, suggesting that the nitrate uptake is mediated by a nitrate/proton antiporter. This result shows that the medium containing commercial tryptone was good enough for the physiological activity of the strain GG0461. Each component of PAF medium was successfully replaced with the corresponding commercial product except peptone. In conclusion, the composition of medium for the cultivation of the strain GG0461 was determined as 2% tryptone, 1% glycerol, plus required salts according to the composition of PAF medium.

• Journal of Mushroom
• /
• v.6 no.3_4
• /
• pp.115-120
• /
• 2008

A new commercial strain 'Garlmoe' was developed by crossing monokaryons from selected wild strains. The optimal temperature of mycelial growth was $25^{\circ}C$ but it needed to adjust to $16{\sim}18^{\circ}C$ when incubated at the bottle cultivation. The optimal temperatures of fruiting body initiation and development were almost same to others like as $14^{\circ}C$ and $7{\sim}10^{\circ}C$, respectively. The color of 'Garlmoe' was typical to wild winter mushroom, that is, pileus was brown and lower part of stipe was dark brown. The surface on pileus of 'Garlmoe' was sticky 'Garlmoe' was a good commercial strain with high quality and high productivity characterized as quite even budding habit, straight and strong stipes and convex type pilei. The taste of this variety was very excellent because of better chewing feeling than white ones.

• Korean Journal of Veterinary Research
• /
• v.49 no.2
• /
• pp.127-133
• /
• 2009

Salmonella enterica subsp. enterica serovar gallinarum (S. gallinarum) is the agent of fowl typhoid, and the 9R vaccine is a commercial live vaccine for the prevention of fowl typhoid. The aim of this study was to assess the safety and immunogenicity of different brands of S. gallinarum 9R vaccine used in commercial laying chickens in Korea. All 9R strains originated from three different brands showed the same pattern in the biochemical and serological properties, and pulsed field gel electrophoresis (PFGE) profile. But, there was a difference in rhamnose fermentaion, agglutination with Salmonella group $D_1$ antiserum and PFGE pattern between 9R vaccine strain and field S. gallinarum isolates. In laboratory and field trials for assesment of safety and immunogenicity of 9R vaccine, all of the three 9R vaccines showed the same safety in commercial laying chickens. In addition, there was a significant difference between the vaccinated and unvaccinated control groups in mortality and the re-isolation rate of the challenge strain from the tissues (p < 0.05), and no difference by the brands of 9R vaccine. The results from this study indicated that all three different brands of S. gallinarum 9R vaccine showed highly protection against mortality and organ invasion in commercial laying chickens exposed to virulent strains of S. gallinarum.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.34-46
• /
• 2014

This paper discusses a new formulation for the failure strain in the average stress triaxiaility domain for a low-temperature high-strength steel (EH36). The new formula available at a low average stress triaxiality zone is proposed based on the comparison of two results from tensile tests of flat type specimens and their numerical simulations. In order to confirm the validity of the failure strain formulation, a user-subroutine was developed using Abaqus/Explicit, which is known to be one of the most popular commercial finite element analysis codes. Numerical fracture simulations with the user-subroutine were conducted for all the tensile tests. A comparison of the engineering stress-strain curves and engineering failure strain obtained from the numerical simulation with the user-subroutine for the tensile tests revealed that the newly developed user-subroutine effectively predicts the initiation of failure.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.131.1-134
• /
• 1999

The effect of dynamic recrystallization during hot forming process was implemented to a commercial FEM code by conditioned remeshing and remapping of sate variables. A datum strain for stress compensation was determined as a strain for maximum softening rate and was able to be formulated as a function of critical strain f($\varepsilon$). The validity of remapping criterion was examined by a series of mechanical tests and microstructural observation. The application of suggested datum resulted in better estimation of load-stroke during forging processes.