• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.565-574
• /
• 2019

Fischer-Tropsch 합성공정은 합성가스로부터 탄화수소를 합성하는 대표적인 방법이며, 주로 철(Fe)계와 코발트(Co)계 촉매로 알려져 있다. 현재 생성물에 따라 일부 기술(CTL, GTL 등)은 상용 규모로 운전되고 있으나, 경질탄화수소와 중간유분을 직접 생산하는 연구는 아직 상용화되지는 않았다. 그러므로, 본 연구에서는 국내에서 현재까지 경질탄화수소와 중간유분을 직접 생산하기 위한 연구들을 정리하였으며, 촉매의 제조법, 조촉매 첨가, 제올라이트의 조합과 같은 영향이 생성물의 선택도에 미치는 영향을 고찰하였다.

• 대한두개안면성형외과학회지
• /
• 제20권1호
• /
• pp.10-16
• /
• 2019

Background: Physicians tend to overcorrect when applying the acellular dermal matrix for reconstructive option because of volume decrement problem after absorption comparing with initial volume. However, there are no studies on the exact volume decrement and absorption rate with commercial products in South Korea. To figure out absorption rate of acellular dermal matrix product in South Korea (Megaderm), authors designed this experiment. Methods: Nine mice were used and randomly divided into three groups by the time with sacrificing. The implant (Megaderm) was tailored to fit a cuboid form ($1.0cm{\times}1.0cm$ in length and width and 2.0 mm in thickness). A skin incision was made at anterior chest with blade #15 scalpel with exposing the pectoralis major muscle. As hydrated Megaderm was located upon the pectoralis major muscle, the skin was sutured with Ethilon #5-0. After the surgical procedure, each animal group was sacrificed at 4, 8, and 12 weeks, respectively, for biopsies and histological analysis of the implants. All samples were stained with routine hematoxylin and eosin staining and Masson's trichrome staining and the thickness were measured. A measurements were analyzed using Friedman test. Statistically, the correlation between thicknesses of Megaderm before and after implantation was analyzed. Results: After sacrificing the animal groups at postoperative 4, 8, 12 weeks, the mean tissue thickness values were $2.10{\pm}1.03mm$, $2.17{\pm}0.21mm$, and $2.40{\pm}0.20mm$ (p= 0.368), respectively. The remaining ratios after absorption comparing with after initial hydrated Megaderm were 82.7%, 85.4%, and 94.5%, respectively. In histopathological findings, neovascularization and density of collagenous fiber was increased with time. Conclusion: Author's hypothesis was absorption rate of implant would be increased over time. But in this experiment, there is no statistical significance between mean absorption thickness of implant and the time (p= 0.368). Also it can be affected by graft site, blood supply, and animals that were used in the experiment.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.42-45
• /
• 2018

As The semiconductor decrease from 10 nanometer to 7 nanometer, It is suggested that "More than Moore" is needed to follow Moore's Law, which has been a guide for the semiconductor industry. Fan-Out Wafer Level Package(FOWLP) is considered as the key to "More than Moore" to lead the next generation in semiconductors, and the reasons are as follows. the fan-out WLP does not require a substrate, unlike conventional wire bonding and flip-chip bonding packages. As a result, the thickness of the package reduces, and the interconnection becomes shorter. It is easy to increase the number of I / Os and apply it to the multi-layered 3D package. However, FOWLP has many issues that need to be resolved in order for mass production to become feasible. One of the most critical problem is the warpage problem in a process. Due to the nature of the FOWLP structure, the RDL is wired to multiple layers. The warpage problem arises when a new RDL layer is created. It occurs because the solder ball reflow process is exposed to high temperatures for long periods of time, which may cause cracks inside the package. For this reason, we have studied warpage in the FOWLP structure using commercial simulation software through the implementation of the reflow process. Simulation was performed to reproduce the experiment of products of molding compound company. Young's modulus and poisson's ratio were found to be influenced by the order of influence of the factors affecting the distortion. We confirmed that the lower young's modulus and poisson's ratio, the lower warpage.

• Journal of Microbiology and Biotechnology
• /
• 제28권12호
• /
• pp.2046-2056
• /
• 2018

Phospholipase D has great commercial value due to its transphosphatidylation products that can be used in the food and medicine industries. In order to construct a strain for use in the production of PLD, we employed a series of combinatorial strategies to increase PLD expression in Bacillus subtilis WB600. These strategies included screening of signal peptides, selection of different plasmids, and optimization of the sequences of the ribosome-binding site (RBS) and the spacer region. We found that using the signal peptide amyE results in the highest extracellular PLD activity (11.3 U/ml) and in a PLD expression level 5.27-fold higher than when the endogenous signal peptide is used. Furthermore, the strain harboring the recombinant expression plasmid pMA0911-PLD-amyE-his produced PLD with activity enhanced by 69.03% (19.1 U/ml). We then used the online tool \RBS Calculator v2.0 to optimize the sequences of the RBS and the spacer. Using the optimized sequences resulted in an increase in the enzyme activity by about 26.7% (24.2 U/ml). In addition, we found through a transfer experiment that the retention rate of the recombinant plasmid after 5 generations was still 100%. The final product, phosphatidylserine (PS), was successfully detected, with transphosphatidylation selectivity at 74.6%. This is similar to the values for the original producer.

• 융합보안논문지
• /
• 제18권1호
• /
• pp.33-42
• /
• 2018

CFD 해석 기술은 열 또는 유체 유동과 관련한 산업 전분야에 걸친 제품의 설계, 개발 시에 컴퓨터를 응용하는 해석기술로서, 컴퓨터를 이용한 가상 시험 (시뮬레이션)을 통해 개발기간 단축, 비용절감 등을 이루고자 활용되고 있다. 그러나 CFD 해석을 위해서는 고가의 외산 상용 CFD 소프트웨어의 사용이 일반적이다. 이에 대한 대안으로 Opensource 기반의 CFD 소프트웨어가 있으나 텍스트 인터페이스 환경만을 지원하기 때문에 전문적인 지식을 가진 사용자만이 사용 가능하다. 이에 본 기술개발에서는 상용 CFD 해석 소프트웨어 수준의 신뢰도를 가지며, 국내외적으로 많은 사용자를 확보하고 있는 Opensource 기반의 CFD 소프트웨어인 OpenFOAM에 대하여 그래픽 기반 환경 설정을 지원하도록 구성하여 전문가뿐만 아니라 초보자도 쉽게 CFD 해석 환경의 구축이 가능하도록 하는 환경을 개발하였다. 또한 개발된 시스템은 CFD 해석을 위한 전처리(형상 및 격자생성) 환경과 후처리(결과 분석 및 가시화)를 위한 환경을 연계를 지원하여 하나의 플랫폼안에서 통합된 CFD 해석 프로세스가 가능하도록 지원한다.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.273-284
• /
• 2018

3D printing technology in the construction field is currently being developed and commercialized actively in foreign countries, but the development of material and equipment is underway as an initial research stage in Korea. It is necessary to implement commercialization through the introduction of 3D printing technology in the construction field as soon as possible in Korea, but there is no guideline for suitable equipment and materials in Korea at present. Therefore, in order to help prepare for commercialization, it is necessary to provide data such as equipment size and materials suitable for commercialization at the initial stage. This study investigates the types, specifications, and applications of equipment that are being used overseas to provide the equipment type and material cost required in the initial stage of commercialization in Korea. Using the surveyed data, it was possible to calculate the advantages and disadvantages of the equipment type and specification, and the cost of materials used. As a result of the analysis, Gantry type is suitable for the domestic commercialization, and the standard of the output area is $100m^2$ and the extrusion amount of $250m^3/sec$ is proposed, and the material cost of the commercial product is 20thousand won. The suggestions in this study will help to plan the construction of products and equipments to commercialize 3D printing technology in construction field in the future.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.169-170
• /
• 2019

인공지능이 글로벌 경쟁력 원천 기술로 부각되면서 정부도 자율주행차, 드론, 로봇 등 미래 신산업의 기반 기술이 되는 인공지능을 전략적으로 육성하고 있다. 국내 인공지능 연구 및 서비스는 네이버와 카카오를 중심으로 출시되었으나 해외에 비하면 규모나 수준이 미약한 편이다. 최근, 딥러닝 (deep learning)은 최근 음성인식과 영상인식을 비롯한 다양한 패턴인식 분야에서 혁신적인 성능을 기록하면서 많은 연구가 진행되고 있다. 그 뿐만 아니라 딥러닝은 초창기부터 산업계의 큰 관심을 끌어 구글이나 마이크로소프트, 삼성전자 등 글로벌 정보기술 회사에서 상용제품에 딥러닝 기술을 성공적으로 적용하고 있고 계속 연구개발을 진행하고 있어 대중매체에서도 관심을 가지고 주목하고 있다. 이러한 선행연구를 바탕으로 주목 받고 있는 인공지능에 대해 살펴보도록 하겠다.

• 인삼문화
• /
• 제1권
• /
• pp.67-77
• /
• 2019

이 논문은 1797년 고려홍삼 무역이 포삼제(包蔘制)라는 공식적인 제도로 시행된 이후 그 수출량과 홍삼세의 규모를 살핌으로써 고려홍삼 무역의 변동과 그 역사적 의미를 살펴보려는 것이다. 19세기 조선의 고려 홍삼무역은 조선 정부가 받아들이는 세금만으로도 공무역의 비용을 능가하였다. 조선은 인삼을 재배하는 농업기술과 저장 기간을 늘리는 홍삼 증포 기술을 바탕으로, 은화의 유출을 막고 중국의 완제품 및 원료를 들여와 국내 상업계와 수공업 및 광업부문을 자극했다. 더우기 조선정부는 고려 홍삼수출로 19세기 후반 매해 20만 냥에 달하는 재정 수입을 올릴 수 있었고, 한때는 중국에서 말굽 모양의 은을 사와서 호조에 비축하기도 했다. 세도정권하에서도 상업계가 전반적으로 활발하게 움직이고, 개성상인 의주상인 서울상인의 활동이 두드러진 것은 이러한 사정에 따른 것이다.

• 한국컴퓨터정보학회논문지
• /
• 제26권1호
• /
• pp.217-222
• /
• 2021

최근 온라인, 모바일, SNS플랫폼 등 디지털 기기를 이용한 상거래에 있어 사회간접자본으로서 온라인 거래의 신뢰와 기업 차원에서 기업 신뢰가 무엇보다 중요하다. 이에 본 연구에서는 한국소비자원의 소비자 정책지표의 데이터를 이용하여 디지털 소비여건 신뢰와 기업의 책임 신뢰가 정보통신 제품과 서비스의 만족도에 미치는 영향을 파악하였다. 분석 결과, 디지털 소비여건 신뢰와 기업의 책임 신뢰가 정보통신기기 만족도와 정보통신 서비스 만족도에 긍정적인 영향을 주는 것으로 나타났다. 또한 디지털 소비여건 신뢰보다 기업의 책임 신뢰가 정보통신기기 만족도와 정보통신 서비스 만족도에 더 큰 영향을 미치는 것으로 나타났다. 이러한 연구결과에 대한 이론적, 실무적 시사점과 향후 연구를 위한 제언 등을 제시하였다.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.609-616
• /
• 2008

Conventional bake-hardenable(BH) steels should be annealed at higher temperatures because of the addition of Ti or/and Nb which forms carbides and raises recrystallization start temperature. In this study, the development of new BH steels without Ti or Nb addition has been reviewed. The new BH steels have nearly same mechanical properties as the conventional BH steels even though it is annealed at lower temperature. The steels also show smaller deviation of the mechanical properties than that of the conventional BH steels because of the conarol of solute carbon content during steel making processes. The deviation of mechanical properties in conventional BH steels is directly dependent on the deviation of solute carbon which is greatly influenced by the amount of the carbide formers in conventional BH steels. Less alloy addition in the newly developed BH steels gives economical benefits. By taking the advantage of sulfur and/or nitrogen which scarenge in Interstitial-Free or conventional BH steels, fine manganese sulfides or nano size copper sulfides were designed to precipitate, and result in refined ferrite grains. Aluminum nitrides used as a precipitation hardening element in the developed steels were also and resull in fine and well dispersed. As a result, the developed steels with less production cost and reduced deviation of mechanical properties are under commercial production. Note that the developed BH steels are registered as a brand name of MAFE(R) and/or MAF-E(R).