• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.45-51
• /
• 2004

본 연구는 두께 24 mm 뉴질랜드산 라디아타 소나무 단판의 마이크로파-열풍 복합 건조특성을 파악하기 위하여 수행되었다. 단판을 100℃ 열풍과 복합한 마이크로파 건조한 결과 함수율 160%에서 0%까지 건조하는데 7.5분이 소요되었다. 이 건조속도는 100℃ 열풍만으로 건조한 경우에 비하여 약 3배 정도 높은 수준이었다. 그러나 과도한 마이크로파 출력이 가해지면 탄흔이 남는 문제가 발생하였다. 그러므로 최적의 건조조건을 결정하기 위해서는 다양한 규격과 수종의 단판에 대한 마이크로파 건조특성의 파악이 요구됨을 알 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.183-188
• /
• 2009

RFID method is a non-contact automatic identification technology, which attaches microchips and antennas to an object in a tag form, to send and process information sent to the network using wireless frequency. Drying and curing process is extremely important which minimizes the resistivity of RFID antennas. This research is about the drying characteristic of conductivity ink, and analyzes and compares the hot-air drying process and infrared drying process. Also, the research was done for the improvement in drying performance by using combined process of hot-air and infrared mechanism. The experiment result shows that the hot-air or infrared drying system used alone cannot meet the required performance in drying printing method using conductivity ink. The combined drying system of hot-air and infrared ray showed resistance low enough in short drying and curing time, and this mechanism makes drying and curing process for mass and continuous production possible on-line.

• 한국산학기술학회논문지
• /
• 제10권3호
• /
• pp.521-528
• /
• 2009

본 연구는 일체형 곡물 건조/저장 시스템에 채용되고 있는 Straight Type Sweeping Auger에 대한 성능과 적합성 검사를 실험을 통하여 검증하였다. 일체형 곡물 건조/저장 시스템의 핵심 기술은 선입선출을 가능토록 하는 Sweeping Auger의 설계기술에 있다. 바람직한 Sweeping Auger의 설계방향을 제시하기 위하여 Straight Type Sweeping Auger가 곡물 속에서 회전할 때 원주면에서 유동하는 곡물의 거동을 알아보기 위한 실험을 실시하고 결과 분석을 통하여 원인규명을 하였다.

• Journal of Biosystems Engineering
• /
• 제41권1호
• /
• pp.34-42
• /
• 2016

Purpose: This study was performed to improve the drying quality and drying rate of ginseng slices by combining microwave and far-infrared drying techniques. Methods: Based on single-factor experiments and analyses, a quadratic regression orthogonal rotation combination design was adopted to study the effects of the moisture content at the conversion point between the microwave and far-infrared techniques, the ginseng slice thickness and the far-infrared drying temperature on the chip drying time, the surface color difference value, the nutritional composition and the surface shrinkage rate index. Results: Compared to the far-infrared drying alone, the combined microwave and far-infrared drying resulted in an increase in the saponin content of the ginseng slices and reductions in the drying time, surface color difference, and shrinkage rate. Conclusions: We established a mathematical model of the relationships between the surface shrinkage rate index and the experimental factors using the multi-objective nonlinear optimization method to determine the optimal parameter combination, which was confirmed to be the following: microwave and far-infrared moisture contents of 65%, a ginseng slice thickness of 1 mm, and a far-infrared drying temperature of $54^{\circ}C$.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.417-424
• /
• 2016

The objective of this study was to evaluate the microwave drying characteristics of mixtures of chemical wastewater sludge (70~90%) and anthracite coal (10~30%) with respect to physical and economic factors such as mass, volume reduction, moisture content, drying rate and heating value when the wastes were dried at different weight mixing ratio and for different microwave irradiation time. The drying process were carried out in a microwave oven, the combined drying process with a 2,450 MHz frequency and 1 kW of power. Maximum dry rates per unit area on the microwave drying of mixtures with chemical wastewater sludge and anthracite coal were $35.5kg\;H_2O/m^2{\cdot}hr$ for Cs90-Ac10; $40.1kg\;H_2O/m^2{\cdot}hr$ for Cs80-Ac20 and $35.0kg\;H_2O/m^2{\cdot}hr$ for Cs70-Ac30. The result clearly indicated that moisture can be effectively and inexpensively removed from the wastes through use of the microwave drying process.

• KSBB Journal
• /
• 제26권1호
• /
• pp.49-56
• /
• 2011

Volatile components of crude fucoidan and its raw material, Undaria pinnatifida sporophylls were identified by GC/MSD analysis, and the effects of a combined method of solvent extraction and drying (hot-air drying or spray drying) on deordorization of fucoidans were examined. The major components of seaweed smell (odor) in crude fucoidan and Undaria pinnatifida sporophylls were identified as alkanes (octadecane, heptadecane, tetradecane) and acids (hexadecanoic acid, oleic acid). Solvent extraction and drying were combined for the deordorization of fucoidans: hot-air drying/deordorization process (HDDP) and spray drying/deordorization process (SDDP). The deordorization effects of solvent extraction using solvents including water, ethanol, and acetone were investigated. Among the tested solvents, ethanol was selected as a deordorization solvent, because the seaweed smell and taste were mostly lowered by ethanol extraction followed by drying. In addition, HDDP and SDDP were compared, showing that SDDP gave higher sensory characteristics than HDDP. When the crude fucoidan was treated by ethanol extraction for 30 min followed by SDDP, approximately 60% of off-flavor components of crude fucoidan was removed based on GC/MSD peak area, and the total sugar and sulfate contents and APTT-anticoagulant activity significantly increased compared to crude fucoidan. In conclusion, SDDP after ethanol treatment was proposed and established as a deordorization process for fucoidan preparation.

• 한국식품과학회지
• /
• 제21권1호
• /
• pp.13-16
• /
• 1989

선택된 당류 및 전분 가수분해 물질을 기질로 사용하여 냉동건조에 의하며 acetaldehyde을 고정시키는 방법을 연구하였다. 단순기질 보다는 복합기질이 일반적으로 acetaldehyde를 고정시키는 능력이 좋았고. 특히 mannitol+lactose가 고정능력 면에서 가장 우수했다. 그리고 경계성 등을 고려할 때 mannitol+maltodextrin이 공업적으로 acetaldehyde를 고정하는데 적당할 것으로 평가됐다. 일반적으로, 기질 농도가 증가함에 따라 건조 중 acetaldehyde손실이 감소하였으며, 기질 농도 40%일 때 mannitol+maltodextrin 기질의 acetaldehyde 고정 능력이 가장 좋았다. 냉동건조 방법으로 acetaldehyde를 고정할 경우 건조실 압력이 낮을수록 건조 중 acetaldehyde 손실이 감소했다. 그러나 대량생산을 목적으로 할 때에는 0.5 Torr이하의 압력을 유지하는데 건조경비 부당이 과다하므로, 0.5 Torr정도의 건조실 압력을 유지하는 것이 적당할 것으로 평가됐다.

• 한국식품과학회지
• /
• 제50권3호
• /
• pp.339-343
• /
• 2018

과열증기와 열풍(과열증기/열풍건조) 또는 원적외선(과열증기/원적외선건조)으로 복합건조한 방울토마토의 이화학특성을 상응하는 열풍건조 토마토와 비교하여, 복합건조가 건조토마토의 품질특성에 미치는 영향을 조사하였다. 방울토마토의 수분함량 85.10%는 열풍건조, 과열증기/열풍 또는 원적외선의 복합건조에 따라 15.98, 22.94 및 23.08%로 각각 감소하였으며, 열풍건조와 달리 복합건조 토마토는 중간수분식품의 수분함량에 해당하는 반건조상태를 나타내었다. 건조토마토의 수축도와 표면색상은 건조 방법에 관계없이 유사하였으나, 열풍건조 토마토는 복합건조에 비해 단단한 텍스처와 낮은 풍미를 나타내었다. 방울토마토의 아스코브산 함량(260.1 mg/100 g)은 열풍건조에서 77.6 mg/100 g으로 최대 감소를 보인 반면, 복합건조의 경우에는 과열증기/열풍건조 120.8 mg/100 g, 과열증기/원적외선건조 185.2 mg/100 g으로 낮은 손실을 나타내었다. 리코펜 함량은 열풍건조, 과열증기/열풍 또는 원적외선의 복합건조에서 각각 5.55, 5.81 및 8.53 mg/100 g으로서, 대조구 대비 77, 76 및 64%의 높은 손실률을 나타내었는데, 이는 건조공정 이외에 시료의 탈피와 동결건조 과정에서 리코펜이 유실, 손상되었기 때문으로 추정된다. 그러나 건조방법에 따른 리코펜의 손실 양상을 고려할 때, 리코펜 손실은 과열증기/원적외선의 복합건조에서 가장 낮은 것으로 판단된다. 한편 수분흡수력은 모든 수침시간에서 복합건조시료가 열풍건조에 비해 현저하게 높았으며, 특히 과열증기/원적외선건조의 경우 가장 빠른 수화복원력을 나타내었다. 이상의 결과에 따라 방울토마토의 건조는 외관, 유용성분의 손실률과 수화복원력의 관점에서 과열증기처리 후 원적외선으로 건조하는 복합건조가 열풍건조에 비해 효율적인 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.21-26
• /
• 2001

Acquisition of precise information on drying characteristics of wood is indispensable for the improvement of drying schedules and wood quality. Recognition of the exact moisture content at which drying defects such as checks occur during drying with given drying conditions may be essential to reduce drying losses. In this study an image-processing system was combined with a laboratory-scale wood dry kiln for experiments and the surface of tree disk of black locust (Robinia pseudoacacia L.) was monitored to investigate the behavior of check formation over all the drying process. This system showed good potential for improving drying schedules and wood product quality.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.73-78
• /
• 2010

This research is about the drying and curing characteristic of conductivity metallic ink on-line curing device in order to improve the curing time for productivity in RFID Gravure printing. The curing process is carried out to increase the electric conductivity after the metallic ink is printed on the substrate. The metal ink is composed of nano-sized silver or copper particles. In this research, the combined IR and Hot air curing system is used and its results is compared with those of oven, IR and Hot Air type respectively. Generally the curing time in the past is about 3 minutes. But the combined system (IR+Hot Air) in this research shows that curing time is less than 30 seconds. These results is much faster than those of other system. This study can be help to make Roll-to-Roll drying and curing process for mass and continuous production on-line.