• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.355-365
• /
• 2015

Environment-friendly growth enhancers for rice are being promoted to reverse the negative impact of intensive chemical-based and conventional rice farming on yield sustainability and environmental problems. Several rhizosphere microorganisms and pyroligneous acids (PA) had demonstrated beneficial influence on growth, yield and grain quality of rice. Since most of the previous study had evaluated the effect of PGPR and PA on paddy rice singly, the effect of combined application of these on the growth and yield of paddy rice and on some soil chemical properties were determined. A four factorial pot experiment was conducted to evaluate the effect of PGPR, PA in combination with fertilizers and on different soil types. There were 54 treatment combinations including the control with three replications under complete randomized design. Plant growth parameters were evaluated using standard procedures during tillering and heading stages. Rice yield and some soil chemical properties were determined at harvest. Results showed that inoculation of Bacillus licheniformis and Fusarium fujikuroi enhanced plant growth by increasing the plant height which could be ascribe to its ability to promote IAA and GA production in plants. Inoculation of Rhizobium phaseoli enhanced chlorophyll content indicative to its ability to improve the N nutrition. However, these plant growth benefits during the vegetative stage were override by the fertilizer application effect especially during the maturity stage and grain yield. High fertilization rates on coarse-textured soil without nutrient loss resulted to high available nutrients and consequently high yield. Wood vinegar application however improved nutrient availability in soil which could be beneficial for improving soil quality. Further evaluation is necessary to fully assess the potential benefits that could be derived from inoculation of these organisms and wood vinegar application in different soil environment especially under different field conditions.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.566-571
• /
• 2009

In this paper, microstrip bandpass filter combined DCRLH metameterial-cells with a hairpin resonator is designed and fabricated to be transferred only fundamental passband signal, and removed a spurious resonant mode occurring when filter design using a microstrip transmission line is done. The bandpass filter is composed of CCRLH hairpin resonator and DCRLH interdigit metameterial-cells. The hairpin resonator with CCRLH property is implemented between two DCRLH interdigit metameterial-cells with DCRLH property, which is parallel to input port and output port. The interdigit metameterial-cells suppress spurious harmonics occurring on the higher order frequency and improve a filter performance. Insertion loss of the fabricated microstrip bandpass filter on the passband from 1.91GHz to 2.41GHz is 0.2dB, and attenuation on the stopband from 3GHz to 7.7GHz is bellower than -30dB. Therefore, this filter has a good performance for both mobile communications of WCDMA and wireless internet of WiBro.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.392-398
• /
• 2006

The properties of tunable dielectric materials on RF frequency band are important high tunability and low loss for RF variable devices, variable capacitor, phased array antenna and other components application. Various composite of BST(barium strontium titanate) ratio combined with other non-electrical active oxide ceramics have been formulated for such uses. We present the tunable properties and Curie temperature on BST thick films. The grain growth of the weight ratio of $BaTiO_3$ increased. This can be explained by the substitute $Sr^{2+}$ ion for $Ba^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$in the $BaTiO_3-SrTiO_3$ system, because of decreasing the lattice constant. Also, the dielectric constant, tunability and K-factor of $(Ba_xSr_{1-x})TiO_3$ at over the Curie temperature decreased, at over the $60^{\circ}C$ fixation, maximum dielectric constant at Curie temperature and hence sharper phase transformation occurred at Curie temperature. The result were interpreted as a process of internal stress relaxation resulting form the increase of $90^{\circ}$ domains induced the BST. As a result, It is concluded that over the Curie temperature, frequency response and DC field effect for the tunable properties of BST thick film are suppressed by the transition broadening. For the application of tunable devices, that the curie temperature was investigated to be increased.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.1
• /
• pp.56-63
• /
• 2000

Buck converter is considered to be one of the most widely used DC-DC converters due to its simple structure and high reliable performance. However, when it be combined with thin-film inductor, its own low inductance requires higher switching frequency in order to maintain optimum output ripple voltage and thus gives rise to extra switching losses. In view to overcoming such a technical inconvenience, soft switching fashion is suggested such as zero-voltage-switching of which an well known example is a Zero-Voltage-Switching clamp voltage(ZVS-CV) converter for which low inductance is imperatively required for ZVS operation. In order to support our suggestion, a 1W ZVS-CV buck converter is built by use of thin-film inductor, and then tested it. From the results of experiment and loss analysis, it is proved that the ZVS operation is well achieved and the measured efficiency of the converter is improved about 4% at full load comparing the conventional buck converter.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.284-291
• /
• 2016

To evaluate the properties of inorganic composites using a great quantity of high-calcium fly ash generated in combined heat and power plants, high-calcium fly ash and F-class fly ash commonly used as concrete admixtures were substituted with binding materials to examine changes of fluidity and compressive strength depending on the substitution ratio for each curing temperature. According to the experimental result, CFA-mixed mortar showed a tendency to reduce its flow unlike FFA-mixed mortar as the substitution ratio was increased, but its flow loss showed smaller than FFA as time passed. As a result of examining compressive strength depending on mixing FA, FFA-mixed mortar had an optimum range within 50% when curing at ambient temperature, but it was found that the compressive strength is reduced when mixing CFA. When curing at high temperature, FFA did not relatively have a great effect on the substitution ratio, but CFA could expect a strength enhancement effect compared with 100% of OPC when using within 25% of binding materials.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.42-54
• /
• 2016

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.511-519
• /
• 2013

Switching controllers for active magnetic bearings are claimed to minimize the copper losses because they do not use bias currents. In this study, we compare the performances of the switching controller with those of the widely used proportional-derivative (PD) controller. The PD controller is combined with a synchronous notch filter to reduce the effect of the unbalance disturbance. For a fair and objective comparison, the PD controller is designed systematically. The switching controller is designed so that the dynamics of the two controllers are almost identical. A system model is developed. This model includes the flexible modes of the rotor and the dynamics of the sensors and amplifiers. The simulation results show that the switching controller indeed reduces the copper loss at lower speeds. However, it fails to operate around the speed close to the bending mode of the rotor.

• Archives of Reconstructive Microsurgery
• /
• v.11 no.1
• /
• pp.19-28
• /
• 2002

From 1994-2001, 25 mutilated digits were reconstructed with immediate toe-to-hand transfer in acute hand injury in 21 patients. There were 15 cases of great toe-to-hand transfer(partial great toe transfer 8 cases, modified wrap-around procedure 2 cases, and trimmed great toe transfer 2 cases) for thumb reconstruction, 2 cases of second toe transfer for index reconstruction, and 4 cases of simultaneous two toe-to-hand transfer(great toe & second toe transfer 1 case, bilateral second-toe transfer 2 cases, combined second & third toe transfer 1 case) for reconstruction of multiple digit amputations. Two cases of emergency exploration(2/25, 8%) were successfully salvaged. The incidence of emergency exploration and postoperative infection was not significantly different from that of the elective toe-to-hand transfer cases. Duration of industrial insurance coverage was 225 days, which is much shorter than that of elective cases. Among 43% of patients maintained their original job even after injury and immediate toe-to-hand transfer. The subjective satisfaction self- assessment scores of aesthetic appearance and function on the new reconstructed thumb were 80 and 88 in average, respectively, over a total score of 100. These were higher than those of reconstruction of other digits, but lower than those of elective reconstruction. The donor site after harvest of the great toe was mostly unsatisfied in a view of appearance. Immediate toe-to-hand transfer provides many advantages over elective procedure in acute hand injuries such as single stage reconstruction, shortened convalescent period, early return to work and efficient socio-economic factor. Furthermore because there were no significant differences in success rate, frequency of complications or ultimate functional result, immediate toe-to-hand transfer is a safe and reliable procedure in case of limited indications for acute digits loss.

• 대한근관절건강학회:학술대회논문집
• /
• 1996.04a
• /
• pp.110-121
• /
• 1996

It is well defined that osteoporosis is an age related disorder and associated with decreased bone mass. It is one of the most important disease lacing the aging population because of its association with fracture of the hip, vertebrae and distal radius. The disease provoke a significant economic burden and major public health problem of an elderly. The life-time risk of hip fracture in white women is approximately 15% which is equal to the combined risk of breast, uterine, and ovarian cancer. Despite its deleterious effect on women's health, knowledge of the epidemiology of osteoporosis in Korea is only beginning. 1970 in Korea has non as the crossover period between the chronic and an Infectious diseases. As the result, the infant mortality declined and an elderly population in Korea increased significantly in the past decade, The average life expectancy of women in Korea is now about 75 years. Thus, the majority of Korean women will spend approximately one-third of their life in the postmenopause state. Therefore, better understanding of bone metabolism and fracture incidence in Korean population is a great interest for the medical community as well as for public health. Currently, no population based epidemiologic data are available to support the incidence of osteoporotic fractures in Korea. However, available data suggest that significant declining of bone mineral density (BMD [g/$cm^2$]) has been occurring in Korean women after menopause. In same population, peak BMD was observed around 33-39 years of age and continue to decline thereafter. An accelerated bone losses occur after the menopause and the average loss is approximately 13% within 15 years from the menopause. The incidence of fracture was highly correlated with an age and bone mineral density. The mean age of menopause in Korean women was 47 years and this age appears to getting younger when analyzed by the birth cohort. An earlier menopausal age and increase life expectancy place Korean women at increase risk for osteoporosis and bone fracture. Korean or Asian women are no longer protected from the risk of bone fracture. Therefore, an early prevention or intervention schemes are essential before the outbreak of osteoporosis and/or fracture occurs in Korean or Asian women.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.306-315
• /
• 2012

In this study, storage stability of reduced sulfur compounds ($H_2S$, $CH_3SH$, DMS, $CS_2$, and DMDS) and $SO_2$ in sampling bags was investigated in terms of two contrasting storage approaches between forward (F) and reverse (R) direction. The samples for the F method were prepared at the same time and analyzed sequentially through time. In contrast, those of reverse (R) method were prepared sequentially in advance and analyzed all at once upon the preparation of the last sample. In addition, relative performance between two different bag materials (PVF and PEA) was also assessed by using 100 ppb standard. The response factors (RF) of gaseous RSC samples were determined by gas chromatography/pulsed flame photometric detector (GC/PFPD) combined with air server (AS)/thermal desorber (TD) system at storage intervals of 0, 1, and 3 days. There is no statistical difference in all RSCs between two storage methods. However, the results of relative recovery indicated 2.58~12.8% differences in compound type between the two storage methods. Moreover, loss rates and storage stability of $H_2S$ and $SO_2$ were considerably affected by bag materials than any other variables. Therefore, some considerations about storage methods (or bag material types) for sulfur compounds are needed if stored by sampling bag method.