• Current Optics and Photonics
• /
• v.6 no.2
• /
• pp.202-211
• /
• 2022

In the pasteurization of escalator handrails using ultraviolet (UV) sterilizers, a combination of light distribution and escalator speed has priority over other important factors. Furthermore, since part of the escalator handrail has a curved structure, proper design is needed to improve the sterilization rate on the surfaces touched by users. In this paper, two types of sterilizers satisfying these conditions are manufactured with 275-nm UV-C LEDs, after modeling the three-dimensional (3D) structure of an escalator handrail and simulating optical distributions of UV-C irradiation on the handrail's surface according to light-emitting diode (LED) positions and reflector variations in the sterilizers. Pasteurization experiments with the UV-C LED sterilizers are conducted on six types of gram-positive and gram-negative bacteria, with exposure times of 0.2, 5, and 15 s at an actual installation distance of 20 mm. The sterilization rates for the gram-positive bacteria are 10.63% to 27.94% at 0.2 s, 89.44% to 96.30% at 5 s, and 99.64% to 99.88% at 15 s. Those for the gram-negative bacteria are 57.70% to 77.63% at 0.2 s, 98.90% to 99.49% at 5 s, and 99.88% to 99.99% at 15 s. The power consumption of the UV-C LED sterilizer is about 8 W, which can be supplied by a self-generation module instead of an external power supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1317-1324
• /
• 2016

Utilizing the Arduino platform to express the emotions that reflect the colors expressed the jewelry. Emotional color expression utilizes Plutchik's Wheel of Emotions model was applied to the similarity of emotions and colors. It receives the recognized value from the temperature, lighting, sound, pulse sensor and gyro sensor of a smart jewelery that can be easily accessible from your smartphone processes that recognize and process the emotion applied the rules of inference based on ontology. The emotional feelings color depending on the color looking for the emotion seen in context and applied to the smart LED jewelry. The emotion and the color combination of contextual information extracted from the recognition sensors are reflected in the built-in smart LED Jewelry depending on the emotions of the wearer. Take a light plus the emotion in a smart jewelery can represent the emotions of the situation, the doctor will be able to be a tool of representation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.337-345
• /
• 2012

One of representative Korean fisheries, jigging and angling has 5,700 vessels for squid and hairtail. Hairtail angling is the most typical fishery in Jeju and has an enormous impact on regional economy. However, the price hike in oil and labor costs triggered the necessity of developing a high efficient and energy saving fish luring lamp in recent times. For that reason, this study aimed to analyze the fishing performance of the aircooled LED lamp targeting hairtail angling fishery. The experiment was conducted from September through October in 2009-2011 for a 9.77 ton of fishing vessel setting up 100 lamps. The fishing performance was tested compared with 6 vessels using metal halide lamps in the same waters. As the LED lamp's performance goes up, different lamps were used in 2008 for 80W, 2009 for 120W and 2011 for 180W respectively. The catch and CPUE of the experimental vessel have gradually increased respectively taking the $4^{th}$ and $6^{th}$ place in 2009, the $4^{th}$ and $2^{nd}$ place in 2010, the $1^{st}$ and $1^{st}$ place in 2011 among the 7 vessels. In summary, the LED fishing lamp showed higher fishing performance than comparison groups. It saved 33% of oil consumption and cut down on operating expenses and greenhouse gases emission.

• Journal of Pharmacopuncture
• /
• v.23 no.1
• /
• pp.18-24
• /
• 2020

Objectives: Pain is considered as a cause of sickness and the most prevalent symptom which makes people visit a physician. Nowadays, combination therapy is becoming useful to relieve chronic and postsurgical pain. The aim of this study was to study the promethazine (as an antihistamine) interactions with antinociceptive effect of diclofenac (as a non-steroidal anti-inflammatory drugs). Methods: In initial part of the study, we investigate the analgesic effect of diclofenac. Using writhing test, we demonstrate that diclofenac significantly reduces writhe response induced by acetic acid in a dose-dependent manner. In this study, we evaluate the combination effect of promethazine on diclofenac analgesic effect. Results: We observed that diclofenac inhibited pain in the dose dependent manner which means that by increasing dose of diclofenac a significant decrease in pain was observed. This experimental setup allowed calculation of the dose that caused 50% antinociception (ED50) for diclofenac. The ED50 for diclofenac in this study was determined to be 9.1 mg/kg according our previous study. Additionally, promethazine was showed a dose-dependent inhibition of writhes. The combination of different doses of promethazine (2, 4, 6 mg / kg) with diclofenac ED50 (9.1 mg / kg) was injected to mice. Promethazine 4 and 6 mg / kg in combination with diclofenac had significantly led to increase analgesic effect of diclofenac. Conclusion: In conclusion, these results add important information to the existing knowledge on combination of diclofenac and antihistamine in pain therapies to be used in clinical practice and maybe helpful in designing the future guidelines.

• Structural Engineering and Mechanics
• /
• v.23 no.4
• /
• pp.353-367
• /
• 2006

Two full-scale, precast, pretensioned box girders were subjected to shear-dominated loading, one under monotonic loads to failure and the other subjected to one-half million cycles of fatigue loads followed by monotonic ultimate loads. The number of cycles was selected to allow for comparison with previous research. The fatigue loads were applied in combination with occasional overloads. In the present study, fatigue loading reduced the shear capacity by only six percent compared to the capacity under monotonic loading. However, previous research on flexure-dominated girders subjected to the same number of repeated loads showed that fatigue loading changed the mode of failure from flexure to shear/flexure and the girder capacity dropped by 14 percent. The comparison of the measured data with calculated shear capacity from five different theoretical methods showed that the ACI code method, the compression field theory, and the modified compression field theory led to reasonable estimates of the shear strength. The truss model led to an overly conservative estimate of the capacity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1081-1088
• /
• 2013

Hyperspectral cameras acquire reflectance values at many different wavelength bands. Dimensions tend to increase because spectral information is stored in each pixel. Several attempts have been made to reduce dimensional problems such as the feature selection using Adaboost and dimension reduction using the Simulated Annealing technique. We propose a novel material detection method that consists of four steps: feature band selection, feature extraction, SVM (Support Vector Machine) learning, and target and specific region detection. It is a combination of the band ratio method and Simulated Annealing algorithm based on detection rate. The experimental results validate the effectiveness of the proposed feature selection and band ratio method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1090-1092
• /
• 2006

There is provided white light illumination system including a radiation source, a first luminescent material having a peak emission wavelength of about 575 to about 620 nm, a second luminescent material having a peak emission wavelength of about 495 to about 550 nm, which is different from the first luminescent material and a third luminescent material having a peak emission wavelength of about 420 to about 480 nm, which is different from the first and second luminescent materials. The LED may be a UV LED and the luminescent materials may be a blend of three phosphors. A human observer perceives the combination of the blue, green and red phosphor emissions as white light.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.1-8
• /
• 2010

Recently, adjustable CCT(Correlated Color Temperature) luminaire for the human circadian rhythm and room atmosphere has been developed. Accurate CCT control is needed in the luminaire for the human circadian rhythm. Therefore, appropriate CCT calculation method for each of fluorescent lamps and white LEDs was examined using three CCT calculation methods in this study. To make accurate CCT combination, CCT for two different CCT lamps was separately measured. And this study compared and analyzed proportionally calculated CCT value with measured value from the compounded luminaire with the two lamps.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.351-356
• /
• 2014

A spherical $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor for use in white-light-emitting diodes was synthesized using a liquid-state reaction with two precipitation stages. For the formation of phosphor from a precursor, the calcination temperature was $1,100^{\circ}C$. The particle morphology of the phosphor was changed by controlling the processing conditions. The synthesized phosphor particles were spherical with a narrow size-distribution and had mono-dispersity. Upon excitation at 395 nm, the phosphor exhibited an emission band centered at 497 nm, corresponding to the $4f^65d{\rightarrow}4f^7$ electronic transitions of $Eu^{2+}$. The critical quenching-concentration of $Eu^{2+}$ in the synthesized $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor was 5 mol%. A phosphor-converted LED was fabricated by the combination of the optimized spherical phosphor and a near-UV 390 nm LED chip. When this pc-LED was operated under various forward-bias currents at room temperature, the pc-LED exhibited a bright blue-green emission band, and high color-stability against changes in input power. Accordingly, the prepared spherical phosphor appears to be an excellent candidate for white LED applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1412-1420
• /
• 2010

In this study, changes in testicular tissues of rats subjected to xylene and formaldehyde inhalation were evaluated. Three experimental groups were included in the study. Each group of rats was exposed to formaldehyde (6 ppm), technical xylene (300 ppm) or a combination of these two agents (150 ppm+3 ppm) for 8 weeks (8 h/d). Control groups were maintained for a period of eight weeks under the same conditions. Staining methods (triple staining, strep ABC method) were applied to examine histometric changes and relaxin like factor (RLF) expression in the testicular tissue. Immunostaining for RLF showed that density of staining for RLF decreased in rats exposed to formaldehyde. Formaldehyde or a combination of formaldehyde and xylene led to a decrease in seminiferous epithelial height. In conclusion, exposure of rats to formaldehyde and xylene-formaldehyde combinations adversely affects Leydig cells (RLF) and seminiferous epithelium of testicular tissue.