• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.32-40
• /
• 1997

This study was carried out to examine the effect of paint dyeing by Gloiopeltis paste in the various painting sizes and concentrations of paste. In the tonality diagram of Lab, surface colors were changed to +a(red), +b(yellow) and -b(blue) by treating of Gloiopelis paste and L value was the tendency of increasing. The penetration decreased with increasing concentration of paste, except for 3% of red and yellow. While it was decreased steadily in the case of Nue. The best penetration of dye was at 3% of concentration of Gloiopeltis paste and it's viscosity was measured 1500cps. As concentration of paste increased, ${\Delta}E_{ab}$increased after 40 hr. irradiation and water fastness and washing fastness test in red and blue. But in the case of ${\Delta}E_{ab}$yellow decreased slightly or not changed.

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.315-322
• /
• 2000

The purpose of this study was to investigate the antibacterial effects of natural colors extracted from yellow natural dyes(Tumeric, Amur Cork Tree and Onion Shell). The water and the methanol extracts of Tumeric and Amur Cork Tree significally decreased the growth of E. coli in vitro and the methanol extract of Tumeric exhibited the strongest inhibitory effect among the samples. Silk and nylon fabrics dyed with water and methanol extracts of the yellow natural dyes showed antimicrobial activities against E. coli and Staph aureus in the Bioassay Test. Nylon fabric dyed with methanol extracts of them showed strong antibacterial effect on E. coli compared with that of water extracts. However, slik fabrics dyed with the extracts could not reduce the growth of E. coli. Silk or nylon fabrics dyed with methanol or water extracts of yellow natural dyes showed antimicrobial activities against Staph aureus. The antimicrobial activity of the fabrics dyed with methanol extracts from Tumeric, Amur Cork Tree and Onion Shell was stronger than that of water extracts, especially, the fabrics dyed with Tumeric extract showed the highest antibacterial property among the dyed fabrics.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.34-42
• /
• 2002

In order to investigate the light fastness of Korean knotweed extract, the concentrate were prepared and dyed to silk fabric under the various conditions, such as kinds of mordants, methods of mordanting, and the dye concentration. After the deed fabrics were irradiated for several hours, the color differences and K/S values were measured. Additionally, the light fastness of Korean knotweed extracts and Emodin in liquid solution was compared. The light fastness of silk fabrics deed with Korean knotweed extract was improved by the Introduction of Fe-mordant, but the surface colors on the dyed fabrics shaded into reddish and dark yellow by 80hours irradiation. Color difference of fabrics were increased wish concentrations of Korean knotweed extracts. So inconsistent fading behaviour was observed. Color difference of dyed fabrics increased remarkably at the early stage of fading and became slowly down except for Fe-mordanted fabric. Absorbance of Korean knotweed extracts and Emodin in liquid solution were extremely decreased with concentrations of colorants, so inconsistent fading behaviour was observed too.

• Textile Coloration and Finishing
• /
• v.12 no.4
• /
• pp.239-247
• /
• 2000

The coloring matter was extracted from the heartwood of Amur cork tree by distilled water. Change of UV-Visible spectra of coloring matter solution by extraction condition and stability for irradiation were determined, and the effect of repeated dyeing with condition of dyebath and mordanting method on shade depth and lightfastness were also investigated. The results are as follows : 1) Absorbance of Amur cork tree extract increased with the lapse of extraction time. λmax of color solution extracted from Amur cork tree was found at 420, 333, and 262nm. 2) Absorbance of Amur cork tree extract decreased remarkably after 2hr irradiation. 3) The K/S of silk fabrics increased with the increase of dyeing temperature, time, amounts of Amur cork tree for extraction, and pH of color solution. 4) K/S of silk fabrics dyed by repeated dyeing method was affected by pH and concentration of color solution. 5) Lightfastness of silk twice dyed with Amur cork tree extract after pre-mordanted by 8%(o.w.f) chromium acetate was moderately improved.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.26-33
• /
• 1996

The berberine from Amur cork tree is natural yellow dye and can be extracted more easily by water. The berberine is basic dye and was extracted at 90-95$^{\circ}C$. We have obtained the following results; 1. K/S value in the abstract of dye was increased by time-elapsing, but the reasonable time was between 90-120min. 2. The reasonable weight of Amur cork tree in the abstract of dye was between 10-20 g/L. 3. We obtained various colors in case of using mordants. ―In case of 10g/L and 20g/l, the reasonable value of mordant was 5-10%(owf). and in case of using tannic acid and $FeSO_{4}$ we could obtain high K/S value. 4. &{\lambda}_{max}& of UV spectra was shown 420nm. 5. Genarally fastness of drycleaning indicated more than grade 4. but it of perspiration was more stable in acid than alkali.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.72-79
• /
• 2006

There are many discrepancies between visually perceived color-difference and that which is quantified from an instrumental measurement when dark color samples are measured in the textile industry. The samples were prepared to represent these dark shades and the values of the instrumental results from conventional color-difference formulae(CIELAB, CMC, BFD II, CIE94, LCD99 and CIEDE2000). Those of visual assessment were compared. The experimental results show that the CIELAB formula gives the best performance over other formulae, and the CIEDE2000 formula for the color-difference according to chroma presents the worst performance. Therefore, we can say that the problems in color matching of dark shades are caused by imperfect formula, because the results obtained from a color-difference formulae are different and the CMC which is used as a standard color-difference formula in the textile industry is not correct. So, a revised color-difference formula is proposed in this study, to account for these problems.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.298-303
• /
• 2011

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

• Textile Coloration and Finishing
• /
• v.9 no.3
• /
• pp.10-17
• /
• 1997

The study was performed to obtain the optimum extraction conditions for crocin from gardenia fructus. Generally crocin is unstable on heat, light, acid and base solution. The extraction efficiency of crocin from gardenia depended upon the extraction time, extraction temperature, pH in the extraction bath and the optimum conditions of crocin extraction were determined as 60 minutes of extraction time, 4$0^{\circ}C$ of extraction temperature, pH 7 of extraction bath. The molar extinction coefficient of crocin was 12,515 and the color yield of purified crocin was about six times higher than that of non-purified crocin. The heat-stability at extraction temperature and lightstability in irradiation with xenon lamp for one hour of the purified crocin were higher than those of non-purified crocin. Intensity of &{\lambda}_{max}&of crocin was decreased by irradiation for one hour but UV-Vis. spectra of crocin was not changed. The colors of purified and non-purified crocin dissolved wit methanol was evaluated by means of CIE L* a* b* system.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.21-27
• /
• 2010

The purpose of this research was to investigate the color characteristic and the dyeing properties of Glycyrrhizae Radix extract on cotton fabrics. The highest absorbance of Glycyrrhizae Radix extract was obtained in 75 v/v% of ethyl alcohol in water. Pre-mordanted cotton fabrics dyed at $30^{\circ}C$ and pH 3 for 80 minutes showed the highest K/S value. According to the dyeing conditions, the colors of the fabrics varied from yellow(Y) and yellowish red(YR) to greenish yellow(GY). The color fastness of the fabrics in dry-cleaning and water was 4~5 rating. The deodorization capacity and UV-cut effect of the dyed fabrics were higher than those of undyed ones.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.199-206
• /
• 2000

Silk fabric was dyed using methanol extract of Chrysanthemum boreale at $60^\circ{C}$ for 40min. The K/S value of the silk fabric was highest in the premordanting method, while the amount of absorbed mordant was largest in the Cu-mordanting. The surface colors of the dyed fabric highly depended upon mordants or mordanting methods. For all cases, the value of the dyed fabric was dark. The chroma was high by using the Cr-mordant and the color difference was distinct by using the Fe-mordant. Cu-mordanted silk showed highest fastness to light. Dyed silk fabrics by mordanting method showed good antimicrobial activity ad deodorization property.