• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.335-344
• /
• 2011

The pearlesent pigment has received attention in a diversity of fields like cosmetics, inks, paints and so on. Ferric Ferrocyanide, one of the nano sized pearlescent pigment, is a kind of surface modification pigment that covers a metal oxidized substance or a coloring agent with uniform thickness. Characteristics of pearlescent pigment are various interference color, intense gloss effect and a three-dimensional effect. We synthesised the pearlesent pigment that ferric ferrocyanide can be deposited on the titania/mica surface by hydrothermal synthesis method. The process parameters are concentration of precursor, controlling pH and reaction temperature. The optimun conditions is that amount of iron(III) chloride hexahydrate is 3.1 wt% and amount of potassim ferrocynide trihydrate is 3.6 wt% in the started pH 4.5 at $70^{\circ}C$. The coating rate and coating efficiency of ferric ferrocyanide was about 1.47 % and 96.7 %, respectively. The synthesised pearlesent pigment was characterized by SEM, XRD, FT-IR and EDS.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.316-320
• /
• 2009

UV curable hard and color coatings were formed on polycarbonate(PC) films. The coating materials were composed of a commercially available end-capped polyester(EB830), diacrylate monomer(HDDA), silicon acrylate, photoinitiator, and organic dye as a coloring agent. The surface properties of coating films were evaluated, and the influences of the compositions of coating materials were investigated. The coating films showed high transmission and good adhesion between coating layer and PC substrate. And the coating films exhibited higher hardness than bare PC film. The coating films with various colors were obtained by wet process, and the clear and color window lenses for mobile phone were prepared successfully.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• Journal of the Korean Society of Food Culture
• /
• v.13 no.2
• /
• pp.119-126
• /
• 1998

This study was carried out to give some help for housewives recognizing the desirable purchase of processed foods and food additives. This results were abtained as follows; In case of purchase action for processed foods of housewives confirmation of manufacturing date was the highest point(4.62). When housewives bought processed foods they considered the taste of them as first, and frequencies of processed foods intake showed the ratio of 46.6%, also it was shown to be used once a week. The order for use of processed foods were milk, milk products(butter, cheese, yoghurt, lactic bacterium beverage) 40.2% >canned foods 22.6% >meat products(ham, sausage, bacon) 20.9% > jelled fish 16.3%. Most of housewives wanted to have the knowledge and information for food additives at the highest point(4.11). The interest about food additives of housewives was shown to the order of synthetic preservative 3.86 >chemical seasoning 3.74 >synthetic sweetener 3.59 >synthetic coloring agent 3.53. Also, it was shown to be thought that the hazard factors effected on food safety were agricultural chemical residue(30.9%), environmental pollution(25.2, food additives(23.0%), and microorganism contamination(20.9%).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.296-305
• /
• 2017

Gallnuts are known to exert various pharmaceutical properties that include anti-inflammatory, antimicrobial, antioxidant, and detoxifying effects. Gallnut extract is thought to be a particularly safe antimicrobial agent for textile application due to its natural origins. Hence, textiles were dyed with gallnut to develop multi-functional clothing material with no harmful effects. In this study, three kinds of cool touch woven fabrics, each comprised of 100% viscose rayon filament, viscose rayon filament/high absorption & quick dry (polyester) filament, and viscose rayon $filament/tencel^{(R)}$ spun yarn, were prepared and used as substrates for gallnut dyeing to especially develop functional cool touch textiles for summer clothing material. On the other hand, gallnut dyeing was conducted with mordanting with iron, lime or alum, which induced different colors on the dyed textiles. Dyed textiles were then investigated by SEM, FTIR, antibacterial test, and antioxidant test. Subsequently, gallnut dyed textiles indicated excellent antibacterial ability and deodorization activity regardless of mordant species. However, only gallnut dyed textiles mordanted with iron and alum showed significant antioxidant ability. In addition, the dyeing processes impair the cool touch feeling of the textiles by changing the micro structure of the textile surface.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.165-170
• /
• 2015

We employed the high-pressure high temperature (HPHT) process to enhance the colors of natural sapphires to obtain a vivid blue. First, we analyze the content of the coloring agent $Fe_2O_3$ using the wavelength dispersive X-ray fluorescence (WD-XRF) method. The HPHT procedure operates under 1 GPa at various temperatures of 1700, 1750, and $1800^{\circ}C$ for 5 minutes using a cubic press. We determine the color changes using the optical microscopic images, UV-VIS near-infrared (NIR) spectra, micro-Raman spectra, and Fourier transform-infrared (FT-IR) spectra for all sapphire samples before and after the treatment. The optical microscopic results indicate that the HPHT process can enhance the sapphire color to a vivid blue at temperatures above $1750^{\circ}C$. The UV-VIS-NIR spectra identify the color changes explicitly and quantitatively through providing the Lab color scales and color differences. Both results demonstrate that the colors of natural sapphires can be enhanced to a vivid blue using the HPHT process above $1750^{\circ}C$ under 1 GPa for 5 minutes.

• ALGAE
• /
• v.28 no.2
• /
• pp.131-147
• /
• 2013

Major progress has been made in the past decade towards understanding of the biosynthesis of red carotenoid astaxanthin and its roles in stress response while exploiting microalgae-based astaxanthin as a potent antioxidant for human health and as a coloring agent for aquaculture applications. In this review, astaxanthin-producing green microalgae are briefly summarized with Haematococcus pluvialis and Chlorella zofingiensis recognized to be the most popular astaxanthin-producers. Two distinct pathways for astaxanthin synthesis along with associated cellular, physiological, and biochemical changes are elucidated using H. pluvialis and C. zofingiensis as the model systems. Interactions between astaxanthin biosynthesis and photosynthesis, fatty acid biosynthesis and enzymatic defense systems are described in the context of multiple lines of defense mechanisms working in concert against photooxidative stress. Major pros and cons of mass cultivation of H. pluvialis and C. zofingiensis in phototrophic, heterotrophic, and mixotrophic culture modes are analyzed. Recent progress in genetic engineering of plants and microalgae for astaxanthin production is presented. Future advancement in microalgal astaxanthin research will depend largely on genome sequencing of H. pluvialis and C. zofingiensis and genetic toolbox development. Continuous effort along the heterotrophic-phototrophic culture mode could lead to major expansion of the microalgal astaxanthin industry.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.3
• /
• pp.177-186
• /
• 2022

In this study, newly improved Ferron assay test haved on timed spectrometry was used for the determination of hyolrolytic Al species presented in PACl coagulant. The color development reagent ferron was prepared by using conventional method and two newly developed methods. Then the ferron assay test was used to compare and analyze the distribution of Al(III) hydrolyzed species presented in the prepared PACl and alum. The preparing method of reagent A required an aging period of 7 days by adding a hydroxylamine hydroxide and a 1,10-phenanthroline monohydrate reagent, whereas the preparing method of reagent B was used as a coloring agent immediately without aging time. The regression analysis between UV absorbance and Al concentrations of conventional method and newly developed method of ferron reagents in low-concentration aluminum solutions and high-concentration aluminum solutions, showed the correlation coefficients of 0.999 or higher, as showing high correlations of conventional method and newly developed method. Applying Ferron assay test, Al species in the PACls and alum were classified as Ala(monomeric Al), Alb (polymeric Al), and Alc (colloidal and precipitated Al). Distribution of Al(III) hydrolyzed species according to the preparation of ferron colorimetric reagents was similar.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.137-145
• /
• 2015

This study aimed to develop epoxy putty as a multi-purpose connection and restoration material that can be used for material-specific restoration work such as metal, wood, ceramics, earthenware and stone artifacts by replacing synthetic resins currently being used for preservation treatment of cultural assets. Existing synthetic resins have the issue of cutting force resulting from high strength, deflection resulting from long hardening time, contaminating the surface of artifacts through staining on tools or gloves and need for re-treatment resulting from material discoloration. Accordingly, paste type restoration material most widely being used in the field of cultural assets preservation treatment was selected and examined the property to select it as an object of comparison. Based on such process, epoxy putty was developed according to the kind of agent, hardener and filler. For the purpose of solving the issues of existing material and allowing the epoxy putty developed to have similar property, property experiments were conducted by selecting agents and hardeners with different characteristics and conditions. The study findings showed that both kinds are paste type that improved work convenience and deflection issue as a result of their work time of within 5~10 minutes that are about 3~10 times shorter than that of existing material. In regards to wear rate for increasing cutting force, it improved by about 3 times, thereby allowing easy molding. For the purpose of improving the issue of surface contamination that occurs during work process, talc and micro-ballon were added as filler to reduce the issue of stickiness and staining on hand. Furthermore, a multi-purpose restoration material with low shrinkage, low discoloration and high cutting force was developed with excellent coloring, lightweight and cutting force features.

• Economic and Environmental Geology
• /
• v.57 no.3
• /
• pp.343-352
• /
• 2024

Composition analysis and lead isotope ratio analysis were conducted to determine the coloring machanism on lead glaze used in Gyeongbokgung Palace and the provenance of the lead used as a flux. 31 blue tiles were classified into green, blue, and yellow. The chemical analysis of lead glazes on the blue tiles revealed that Pb, Si, and Cu were the main components, and trace amounts of Fe, Ca, Mg, and Al were detected. The Cu content was high in blue lead glaze, while Cu was not detected in yellow or brown lead glaze which instead had high Fe content. Therefore, it was found that lead was used as a flux and copper oxide as a coloring agent in the production of lead glaze. In addition, the lead isotope ratios of the lead glaze used in the blue tiles of Gyeongbokgung palace were plotted in zone 3 on the distribution map of lead isotope ratios on the Korean Peninsula, which includes Chungcheong-do and Jeolla-do. It is presumed that the flux for the lead glaze was sourced from galena found in these regions. The lead isotope ratios of the green glaze from the Three Kingdoms and Unified Silla period were mostly located outside the Korean Peninsula, showing that the provenance of lead had changed. In particular, the lead isotope ratios of the green glaze from the Three Kingdoms and Unified Silla period suggest exchange with neighboring countries. Also the lead isotope ratios of the green glazes from the same temple are different, so it is believed that they were made at different times or in different workshops.