• 한국식품과학회지
• /
• 제18권5호
• /
• pp.389-392
• /
• 1986

맨드라미 붉은 색소의 식품학적 평가를 위하여 모델식품으로 젤리포(중간수분 식품), 캔디(고상식품) 및 샤베트(냉동식품)를 선택하여 맨드라미 붉은 색소로서 빨갛게 착색시켰다. 저장중 색도변화는 Hunter 색도계, Lovibond tintometer 및 분광광도로서 측정 분석하였고 아울러 색도관능 시험도 행하였다. 실험 결과로서 맨드라미 붉은 색소는 특정한 조건의 식품; 수분 활성도가 낮은 식품 및 냉동 식품에 성공적으로 활용할 수 있음을 알았다. 각 측정기기 사이에서 얻은 실험 결과는 밀접한 상관 관계가 존재하였다.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.899-905
• /
• 2011

In order to develop bacterial cellulose (BC) with antimicrobial activity against pathogenic microorganisms, silver and chitosan were incorporated into BC, respectively. Experiment results showed that antimicrobial activity against pathogenic microorganisms was improved with increasing silver concentration. Chitosan also showed a direct proportion between its concentration and antimicrobial activity. These results suggest that antimicrobial effects of BC using silver and chitosan are well proven to be effective. We also tested the stainability of BC with natural colorant for the application of food industry. Stainability of BC was enhanced with increasing natural colorant concentration. Decolorization of BC stained was observed by dipping it into distilled water with one hour-intervals. As a result, there was no significant difference. Combination of natural colorant-stainability and antibiosis of BC is expected to be useful in making colored antibiotic BC in various industrial application areas, considering its antimicrobial activity, high stainability and low decolorization tendency.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.281-287
• /
• 2015

The aim of this study was to investigate the possibility utilizing Metasequoia(Metasequoia glyptostroboides) cone as a new natural dye resource. In previous study, dyeing onto cotton fiber was carried out and Metasequoia cone colorant showed low affinity to cotton fiber and maximum dye uptake was obtained at pH 3.5 showing YR Munsell color. For further evaluation of its efficacy as a new natural dye resource, effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated for silk fiber. Metasequoia cone colorant showed good affinity toward silk fiber showing YR Munsell color and maximum dye uptake was shown at pH 3.5. Post-mordanting with Cu and Fe improved dye uptake, especially Fe($C_5H_{10}FeO_6$) mordant was effective as much as 2 times higher dye uptake comparing with un-mordanted sample. The color of dyed fabrics with mordanting showed YR Munsell color. Fe mordanted fabrics appeared dark gray~black color. Colorfastness to washing was relatively good, whereas lightfastness of the dyed fabrics showed grade 2. It was confirmed that Metasequoia cone colorant can be used as a new dye resource for silk fiber getting brownish yellow to dark gray/black color depending on mordant type. In addition, it showed antimicrobial functionality.

• 대한전자공학회논문지SP
• /
• 제44권6호
• /
• pp.35-46
• /
• 2007

본 논문은 불필요한 잉크의 양을 줄이기 위하여 전체 잉크량 제한과 도트 가시성 순서에 기반한 6색 분리 방법을 제안한다. 첫 번째, 입력 RGB 이미지의 CIELAB 값이 컬러 혼합 모델을 이용하여 추정되고 미리 정한 색차 허용 범위 내의 CMYKlclm 색료의 모두 조합에 해당하는 CIELAB 값과 비교되어, 그 결과 초기 CMYKlclm 후보군이 선택된다. 그 다음, 전체 잉크량 제한이 과도하게 사용된 잉크량을 줄이기 위해 초기 CMYKlclm 후보군에 적용되고, 최후의 CMYKlclm 후보군이 C, M, Y, K, lc, lm의 도트 가시성 순서에 기반하여 어두운 영역에 사용된 묽은 사이안과 묽은 마젠타의 사용량을 줄임으로써 결정되어진다. 실험에서는 제안된 방법이 좋은 이미지 품질을 유지하면서 과도한 잉크 사용량을 줄인 것을 보여준다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.498-503
• /
• 2013

Over the past decade, the feasibility of using ink-jet printing for the decoration of porcelain tiles has been explored, and significant advances have been made regarding the technologies underlying printing system and materials. An ink-jet printing system for porcelain tiles has many advantages compared with a conventional printing system, including the following: (1) it is a digital process; (2) it uses non-contact printing; (3) it allows random image generation; (4) it is a highly efficient process (reduced production cost); (5) it offers massive and continuous production; and (6) it uses inorganic pigment colorants. For these reasons, ink-jet printing systems for porcelain tiles have been commercialized and are at present rapidly spreading toceramics-leading countries such as Spain, Italy, China and Japan. We also developed a proprietary system involving a piezo-electric drop-on-demand method and an ink-circulation step. The resolution of this system is greater than 360 dpi after a heat treatment and the maximum printable width is 600 mm, even when setting the printing head unit with four digital colors (cyan, magenta, yellow, and black). In addition, we systematically developed ceramic colorant-containing inks and tile-printing technology applicable to our ink-jet printing system.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.1041-1051
• /
• 2021

The purpose of this study was to identify for extenders, adhesives, colorants, and fungicides suitable for the production of high-quality film-coated seeds of Chinese cabbage. In addition, the effect of various additives used for film coating on the germination of coated seeds and seedling vigor was investigated to establish appropriate treatment conditions for film coating efficiency. The germination rate and germination speed in Chinese cabbage film-coated seeds did not differ significantly depending on the type and concentration of the extender, while the use of Talc resulted in superior granulation capacity and adhesion of the seed coat in comparison to Zeolite. There was no significant difference in the germination rate depending on the type of adhesive used for film coating of Chinese cabbage seeds, but the germination rate was slightly slower in the film-coated seeds using carboxymethyl cellulose as an adhesive. On the other hand, the seeds coated with a film using 1% PVA as an adhesive not only maintained hardness enough to withstand external pressure, but also showed a high germination rate. In addition, the suitable disinfectant for film coating was venoram, and the treatment concentration was good at 250 mg·L^-1. The type of colorant used in the film-coated seeds of Chinese cabbage did not significantly affect the germination rate, germination speed, and seedling vigor. The seeds film-coated using the liquid colorant were superior in appearance to the seeds film-coated with the solid colorant, which implies the possibility of reduction in the manufacturing costs by using the water-soluble paints as colorants for film-coated seeds.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2007년도 추계학술발표회
• /
• pp.75-76
• /
• 2007

• 대한가정학회지
• /
• 제38권9호
• /
• pp.119-130
• /
• 2000

The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$\pm$2$\^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.96-104
• /
• 2015

This study examined the pretreatment effect, appropriate dyeing conditions, color fastness and functionality of cotton fabrics dyed with Zizania latifolia Turcz. Dye uptake was substantially increased by pretreatment and chitosan pretreatment was much more effective than tannic acid pretreatment. Optimal dyeing conditions were colorant concentration of 100%, dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and dyebath pH of 5.5. Color fastness of chitosan pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 3(alkaline) and 3 respectively. Color fastness of tannic acid pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 4-5(alkaline) and 4 respectively. Deodorization rates of ammonia(NH3) were 99.9% in both cases. UV protection rate were 98.3% of UV-A and 98.5% of UV-B in case of chitosan pretreatment. UV protection rate were 98.2% of UV-A and 98.5% of UV-B in case of tannic acid pretreatment. UV protection factor(UPF) was 50+ in both cases. Reduction rate of Staphyloccus aureus were 99.9% in both cases. Therefore Zizania latifolia Turcz. could be used a new functional colorant.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.179-186
• /
• 2011

For the application of Jeju scoria scattered around the island as a natural dye, cotton fabrics were dyed with the dye and their properties were measured including dyeability, colorfastness, antibacterial activity, deodorization efficiency, ultraviolet protection, and far-infrared emission. The dyed cotton fabrics were in yellowish red and optimal dyeing conditions were obtained with a colorant concentration of 25%(o.w.b) at a temperature of $80^{\circ}C$ for the dyeing time of 120 minutes. The ratings of colorfastness to light, rubbing, perspiration, and washing were 8, 5, 5, and 4~5 respectively. After 15 wash cycles, colorfastness remained as much as 4~5 rating. The cotton fabric dyed with Jeju scoria demonstrated excellent antimicrobial activity and deodorization efficiency of 99.9% and 93.9% respectively. Ultraviolet protection factor was 50+. Far-infrared emission rate and far-infrared emission intensity were 90% and 362(W/$m^2{\cdot}{\mu}m$) respectively. The Jeju scoria can be introduced as a new colorant for the natural dyeing of cotton.