• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.578-582
• /
• 1995

The resonance ionization mass spectrometry (RIMS) system with angular reflectron type time-of-flight mass spectrometer (AREF-TOFMS) has been developed and characterized. The system is applied for the ultratrace determination of Pb element. The 2-color 3-photon laser ionization scheme is adopted for the study and the mass resolution of the system is determined as T/ΔT=1680. The calibration curve for Pb is obtained in the range of 100 ppb to 0.01 ppb by using standard solutions. The minimal amount of detection for the present RIMS system is determined as less than 100 femtograms (10-13 gram).

• Korean Institute of Interior Design Journal
• /
• v.17 no.6
• /
• pp.207-215
• /
• 2008

Modern people come to have high standard and variety need for the oneself expression these days. This phenomenon also, appears in the house space clearly. There are design characteristics in an element expressing a lifestyle and personality in the house space and a living room is the space that is important at time to do a design characteristics plan. Therefore, this study is going to analyze the design characteristics of the apartment house which is a representative house type these days. Concretely, there are design characteristics that a color, an Image, a style. This study used questionary survey from June 10, 2008 to July 9. The color analyzed a color and tone through a color palette of PCIS and the living room image used SD(semantic differential method) method by a concrete analysis method. The result of the analysis were as follows; 1) Various colors and tone were prefer in a house future than the house where lived in. 2) It was done prefer to 'comfort' image for the future living room image in the future but 'provocative' image and 'splendid' were not done a choice 3) A 'modern style' was done prefer to of with a house living room style in the future.

• International Journal of CAD/CAM
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2002

The STL or Stereolithography format, established by 3D systems, gathers the geometric data of the model in a number of triangular surfaces. It can be in ASCII or binary format, and is a de facto standard in the Rapid Prototyping (RP) world. RP has developed greatly over the last ten years. In particular, improvement in materials has meant greater part accuracy and strength, which in turn has increased the range of functional applications. Future applications of RP will focus on rapid tooling and direct manufacturing. Direct manufacturing in particular may see much benefit from the incorporation of color into models. For color RP, besides designing new hardware to add color into the prototypes, it is necessary to redefine the CAD software for adding and accurately positioning color onto the model. STL cannot effectively store this kind of information. Among the existing data file formats, VRML is an acceptable one that is complimentary to existing RP processes. This paper acts as a review to discuss several methods of using VRML for coloring model data. This paper will also discuss the problems occurred in coloring the layer contours of the RP model.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.167-172
• /
• 2006

An image retrieval system retrieves and offers same of similar image based on various features of image. This paper present a brand image retrieval system based on color and shape of image. We use the image for a color information by dividing into the area and extracting the area color distribution histogram. We use for the shape information by preprocessing of the boundary extraction, the centroid extraction, angular sampling etc. and calculating of the sum of the distance from the centroid to the boundary, the standard deviation, and the rate of long axis to short axis. We accomplish the retrieval through a similarity measurement by using the color and shape information which is extracted in this way.

• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.42-47
• /
• 1961

A titration of a small amount of iron with standard potassium ferrocyanide using potassium thiocyanate as indicator has been studied. A sample solution containing $0.1{\sim}1.0$ mg. $Fe^{3+}$ in 60 ml. is pipeted into 100 ml. Erlenmyer flask and the pH of the solution is adjusted to $1.5{\sim}3.0$ with 0.1 N or 1 N $HNO_3$ and $NH_4OH.$ To this solution one ml. of 1 M KCNS solution as indicator is added. The solution colored by iron thiocyanate complex is titrated with 1/200 M or 1/400 M standard solution of potassium ferrocyanide from a 5 ml. micro-buret. Near the end point, when the color of sample changes from deep red to green, about 20 ml. of ether is added and shake the flask vigorously. The red color is extracted to the ether layer. To settle the ether layer a few drops of ethanol is added and then standard solution is added dropwise and shake vigorously. The end point is reached when the color of the ether layer disappears owing to the quantitative formation of $Fe_4[Fe(CN)_6]_3.$ In this titration, 0.lmg. of $Fe^{3+}$ can be determined within 1.0% of titration error, provided the following optimum conditions, i.e., pH $1.5{\sim}3.0$, final concentration of KCNS indicator; $0.01{\sim}0.02M$, at room temperature. The titration found to be interfered by the presence of slightly soluble salts, stable complex forming ions and the ions which would be reduced by ferrocyanide or oxidized by ferric ion.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.535-542
• /
• 2003

This study is concerned with an assistive technology which reduces color blinds´s confusion when they access electronic documents including color objects in their computers. In this study, 1 restrict the assistive technology would apply to windows operating system, 256 color mode and implement to minimize color distortion which occurs in multi window environments because of color approximation process. As a basic palette, I use a 216 colors web safe palette which the Christine proposed as a standard for color blind, expand it to 256 colors to apply all computer displays using Microsoft Windows as its operating system and implement it as windows application. To test its effectiveness, I use a simulator for dichromats, as results of the test, the developed color vision deficiency correction S/W is effective to reduce the confusion. It is more effective to use the implemented S/W in both of design and client process for electronic documents.

• Journal of the Optical Society of Korea
• /
• v.17 no.4
• /
• pp.344-349
• /
• 2013

This paper proposes a simulation algorithm to assess the gradual yellowing vision of the elderly, which refers to the predominance of yellowness in their vision due to aging of the ocular optic media. This algorithm employed the spectral transmittance property of a yellow filter to represent the color appearance perceived by elderly people with yellow vision, and modeled the changes in the color space through a spectrum change in light using the yellow filter effect. The spectral reflectivity data of 1269 Munsell matte color chips were used as reference data. Under the standard conditions of a D65 illuminant and a $10^{\circ}$ observer of 1964 CIE, the spectrum of the 1269 Munsell colors were processed through the yellow filter effect to simulate yellow vision. Various degrees of yellow vision were modeled according to the transmittance percentage of the yellow filter. The color differences before and after the yellow filter effect were calculated using the DE2000 formula, and the color pairs were selected based on the color difference function. These color pairs are distinguishable through normal vision, but the color difference diminishes as the degree of yellow vision increases. Assuming 80% of yellow vision effect, 17 color pairs out of $(1269{\times}1268)/2$ pairs were selected, and for the 90% of yellow vision effect, only 3 color pairs were selected. The result of this study can be utilized for the diagnosis system of gradual yellow vision, making various types of test charts with selected color pairs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.128-133
• /
• 2020

This study was conducted to demonstrate the manufacturing process for producing high-quality solar salt. The design criteria of the manufacturing process, which was studied in a previous study, was applied to an actual manufacturing system to evaluate its performance. The design factors applied were the drying air temperature and the temperature of the washing water. They were 100℃ or less and 10℃ or less, respectively. Two standards were applied to the process performance evaluation. Standard (I) was the international food standard for solar salt, and standard (II) was the quality standard for high-quality solar salt production. The main quality evaluation items were the moisture content and salinity, and the color characteristics were also measured (p<0.05). The manufacturing process of solar salt consisted of five steps, and the quality change was measured for each step. The measured quality was appropriate to the standard (I) from the third-step process. In addition, the quality of the high-quality solar salt was suitable for the standard (II) from the fourth-step process. Therefore, the performance of the proposed solar salt production process met international standards. The improvements in the production of high-quality solar salt will improve international competitiveness in the future.

• Journal of Technologic Dentistry
• /
• v.32 no.4
• /
• pp.341-350
• /
• 2010

Purpose: This study focused on achieving desired shades by combining zirconia core with different thickness porcelain in order to make dental prostheses effectively. Methods: White and colored $LAVA^{TM}$ All Ceramic (3M-ESPE, Seefeld, Germany), and Zirkonzahn (Bruneck, Italy) Trans and prettau were used to have Zirconia. LAVATM Ceram (3M-ESPE, Germany) and ICE (Zirkonzahn, Italy) powder were used to have the porcelain. We made quadrilateral specimen of thickness 0.3mm, 0.5mm, 0.7mm and diameter 10 to use zirconia ceramics system of 2 kinds that color tone reappearance way is different and produced total 120 specimens to 4 experimental groups. We used Spectrophotometer to analyze color tone. Data's value getting by dispersal colorimetry period found L*, a*, b* value using Excel program. We used one-way ANOVA to use SPSS WIN 12.0 program. Results: All L*, a*, b* indexes of zirconia core and porcelain veneer in LAVA group and Zirkonzahn group were different. When you combine the white zirconia core of LAVA group with a porcelain veneer, the thickness of the porcelain must be more than 0.5mm to meet the standard target. When all the colored zirconia cores of LAVA group were combined with porcelain veneers, there was no significant difference from the standard target. When the zirconia cores of Zirkonzahn group are combined with porcelain veneers, the thinner thicknesses were closer to the standard tab than thicker thicknesses; however, there was a significant difference in all combinations, with Delta E* value indicating more than 3. Conclusion: When it comes to colored zirconia, which is the most popular, the thicknesses of both a core and a dentin veneer must be more than 0.3mm to get an appropriate shade. There is more possibility to get desirable shades when the thicknesses of a white core are thinner; however, they would be vulnerable to the environment and lose their color. When combine a zirconia core with a dentin veneer, using Zirkonzahn group needs more considerations in order to meet the standard target.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.164-167
• /
• 2008

A rose cultivar "Haedoji" developed at the Jeollanamdo Agricultural Research and Extention Services (JARES) is a standard type with deep Red flower. From 2000, two cultivars 'Vital' and 'Cardinal' were examined for horticultural characteristics and were included in cross-combination in 2003. Cultivar 'Vital', a vigorous standard type, first preference with red flower, was used as a mother plant and cultivar 'Cardinal', a red flower standard type with light color, was used as a pollen-donor plant. seventeen six breeding lines were selected in 2004 based on flower shape, flower color and abundance of petal numbers on the first selection. two breeding lines were selected in 2004 based on powderly mildew and vigor on the second selection. For three years, from 2005 till 2007, one breeding lines were selected and examined for their productivity, and then cultivar "Haedoji" was developed because of distinctive characters such as light red color flower, upright stem, long vase-life and Resistance to the Powderly Mildew. A standard type with intermediate sized flower, cultivar "Haedoji" shows in average 9.2 cm flower diameter, 62.0 cm flower stem length, and 9.5 days vase-life. The average productivity for three years was $167.3stems{\cdot}m^{-2}$ per year and increased 2% compare to cultivar 'Tiamo' with $163.9stems{\cdot}m^{-2}$ per year.