• 제목/요약/키워드: Color pigments

검색결과 421건 처리시간 0.026초

X-선 투과깊이 검증에 따른 벽화 안료의 정밀분석: 논산 쌍계사 대웅전 (Pigment Analysis for Wall Paintings According to Verification of Penetration Depth for X-ray: Ssanggyesa Daeungjeon (Main Hall of Ssanggyesa Temple) in Nonsan)

  • 전유근;이찬희
    • 보존과학회지
    • /
    • 제27권3호
    • /
    • pp.269-276
    • /
    • 2011
  • 이 연구에서는 안료층에 대한 X-선의 투과깊이를 산출하여 벽화안료의 효과적인 P-XRF 분석기법을 제안하였다. 실험결과, P-XRF에서 발생한 X-선은 안료의 1.17mm까지 투과가 가능한 것으로 산출되었다. X-선의 투과깊이와 특성을 활용하여 논산 쌍계사 대웅전 벽화에 채색된 8가지 색상의 안료를 분석한 결과, 대부분의 안료는 전통안료를 사용한 것으로 확인되었다. 그러나 근대에 복원한 벽화는 원래의 벽화와 색상은 유사하지만 현대안료를 사용한 것으로 나타났다.

균일침전법을 이용한 아나타제형 TiO2 분말의 제조 및 특성 평가 (Synthesis and Characterization of Anatase TiO2 Powder using a Homogeneous Precipitation Method)

  • 최순옥;조지희;임성환;정은영
    • 대한금속재료학회지
    • /
    • 제49권5호
    • /
    • pp.367-373
    • /
    • 2011
  • This paper studies the experimental method that uses the homogeneous precipitation method to prepare mica flakes coated with anatase-type titania pearlescent pigment with urea as precipitant. The optimum technology parameters, the chemical composition, the microstructure, and the color property of resulting pigments are discussed. The coating principle of mica coated titania with various coating thickness is analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy(TEM) and tested by spectrophotometer analysis. The colored nanocrystalline pigments with different morphology and coating thickness 45-170 nm were prepared by homogeneous precipitation treatment of $TiOSO_4$(titanum oxysulfate) aqueous solutions. Characterizations on the pigments show that the pearlescent effects of the pigments depend mainly on mica size, thickness of the metal oxide deposit, its chemical composition, and crystal structure.

C57BL/6 마우스의 등에 시행한 자가 전층피부이식편을 이용한 색소침착 동물모델 (Animal Skin Pigmentation Model Using Full Thickness Skin Graft in C57BL/6 Mouse)

  • 이홍기;박종림;허은주;김석화
    • Archives of Plastic Surgery
    • /
    • 제38권6호
    • /
    • pp.725-732
    • /
    • 2011
  • Purpose: Skin grafting is one of the most commonly used methods in reconstructive plastic surgery field, but complications such as color change, contracture or hypertrophy are common problems. However, pathophysiology of the color change after skin graft is not yet determined and no animal model is established. Methods: Full thickness skin grafts were performed on the dorsum of C57BL/6 mice. Serial chronological gross inspection for color change and pigmentation were examined. Melanin pigments were traced by Fontana-Masson staining and semi-quantitative analysis was performed. In addition, immunohistochemical staining of S-100, Micropthalmia related Transcription Factor (MITF) and Melan-A antibodies were also performed to observe melanocytes and their changes. Results: After skin graft, color change and pigment spots were observed in the graft. Fontana-Masson staining showed melanin pigments in the epidermal and dermal layers in all mice. Immunohistochemistry staining to S-100, MITF, Melan-A antibodies showed melanocytes at the basal layer of epidermis and dermis. Conclusion: In conclusion, we have established an animal model for skin pigmentation after skin graft. We believe this study may be useful in understanding of the behavior of melanocytes after skin graft.

(Cr, Fe)-doped Y2O3-Al2O3계 붉은 안료의 합성과 특성 (Synthesis and Characterization of (Cr, Fe)-doped Y2O3-Al2O3 Red Pigments)

  • 신경현;이병하
    • 한국세라믹학회지
    • /
    • 제46권4호
    • /
    • pp.350-356
    • /
    • 2009
  • Perovskite codoped with chromium and iron have been studied. Samples with $YAl_{0.96}(Cr_{0.04-x}Fe_x)O_3$(x=0.01, 0.02, 0.03, 0.04) were prepared by solid state reaction at $1450^{\circ}C$ for 6 h and were characterized by XRD, FT-IR, Raman spectroscopy, SEM and UV-vis spectrophotometer. The color of the synthesized pigments were from red to dark brown(in bulk). Up to 0.02 mole $Fe_2O_3$ for substituting $Cr_2O_3$ development of color in lime-glaze gives good red color but as increasing amount of $Fe_2O_3$ and decreasing $Cr_2O_3$ proportionally produce from brownish red to brown. Increasing $Fe_2O_3$ amount lead to weaken crystal field relatively due to have smaller ionic radius than $Cr_2O_3$ ionic one. The UV-vis peaks were shifted to lower wavelength.

수분함량, 상대습도 및 pH가 냉장 우육의 색도 및 색소에 미치는 영향 (Effect of Moisture, Relative Humidity and pH on Color and Pigments of Cold Storage Beef Meat)

  • 정인철;문귀임;김기영;김미숙;이교연;강세주
    • 한국식품영양학회지
    • /
    • 제11권2호
    • /
    • pp.221-227
    • /
    • 1998
  • 본 연구는 냉장우육의 수분함량, 상대습도, pH, 색도 및 색소의 상관관계를 검토하였다. 등심과 사태의 표면 및 내부의 수분함량과 상대습도는 저장 중 일률적인 변화를 보이지 않았고, pH는 저장기간에 따라 높아지는 경향이었다. L값은 저장말기로 갈수록 높아졌고, b값은 표면이 내부보다 낮았다. 등심과 사태의 표면 및 내부에 공통적으로 myoglobin과 metmyoglobin이 음의 상관관계가 있고, 사태의 표면과 내부는 myoglobin과 L값이 양의 상관관계에 있으며, Myoglobin과 oxymyoglobin이 음의 상관관계가 있었다. 그러나 수분함량, 상대습도 및 pH는 색의 변화와 일률적인 상관관계는 없었다.

  • PDF

Phytosterylferulate가 米糠油 暗色化에 미치는 影響에 關한 硏究 (The Darkening Effect of Phytosterylferulate on the Rice Bran Oil)

  • 김점식
    • 대한화학회지
    • /
    • 제13권4호
    • /
    • pp.325-332
    • /
    • 1969
  • An attempt has been made to investigate the nature of the characteristic darkening reaction occurring in the rice bran oil during the storage. Several pigments were separated by using column and thin layer chromatography of the pigments was made in the light of the knowledge of absorption spectral behavior. The presence of trace amount of iron and phytosteryl esters of ferulic acid (3-methoxy-4-hydroxy-cinnamic acid) was found to be responsible for the development of the characteristic color in rice bran oil. The model reactions with the ferulate, iron and fatty acids could be suggested the mechanism.

  • PDF

패각의 종류 및 소성 여부에 따른 호분안료의 특성 평가 (Characteristics Evaluation of Hobun Pigments according to Shell Types and Calcination)

  • 박주현;이선명;김명남;홍진영
    • 자원환경지질
    • /
    • 제56권6호
    • /
    • pp.899-909
    • /
    • 2023
  • 본 연구는 전통적으로 채색문화유산의 백색 무기안료로 사용된 호분안료를 대상으로 패각의 종류 및 소성 여부에 따른 재료과학적 특성을 분석하고, 보존환경 안정성을 평가하였다. 이를 위해 벚굴, 대합 패각 2종으로 제조된 호분과 이를 1,150 ℃에서 소성한 호분 2종을 수집하였다. 성분분석 결과, 소성 전의 호분안료는 calcite, aragonite 등의 탄산칼슘이고, 소성 후에는 portlandite가 주구성 물질로 calcite가 혼재되어 있었다. FE-SEM분석 결과, 소성 전에는 패각 종류에 따라 고유의 입형 조직을 보이지만 소성 후에는 다공성 입자의 조직 형태로 변하였다. 이에 따라 안료의 흡유량이 상당히 커지는 것을 볼 수 있다. 또한 소성 전보다 소성 후 백색도가 향상되는데, 대합 호분 안료(CS)의 색도 개선율이 더 높았다. 촉진내후성 시험 결과, 호분안료 채색시편은 시험 후 색차값이 2미만으로 육안으로 인지하기 어려운 정도였다. 특히 소성 전에 비해 소성 후 호분안료의 색차값이 작은 것으로 색 안정성이 높아진 것을 알 수 있다. 반면 소성 전보다 소성 후 시편에서 채색층 도막의 안정성이 떨어지는 것을 확인하였다. 항진균 효과는 공시균으로 Aspergillus niger, Tyromyces palustris, Trametes versicolor를 사용하였고, 호분안료가 곰팡이균에 대한 예방 보호적 효과가 있는 것으로 드러났다. 특히 소성과정을 거친 안료의 항진균 효과가 우수했는데, 이는 안료의 재료적 특성상 염기성이 강해진 것에 기인된 결과로 판단된다.

CoO가 첨가되지 않은 스피넬계 흑색안료의 합성 (Synthesis of Cobalt Oxide Free Black Color Spinel Pigment)

  • 김준호;이성호;서만철;이병하
    • 한국세라믹학회지
    • /
    • 제44권11호
    • /
    • pp.639-644
    • /
    • 2007
  • Spinel pigments, developing black color in high temperature glazes at oxidation or reduction atmosphere, without CoO because of its high price were synthesized by solid solution method. Ten mixed compositions consisted of NiO, MnO, $Fe_2O_3 and $Mn_2O_3$ were fired at $1250^{\circ}C$ for 1h. The resulting pigments were characterized by using XRD, FT-IR, SEM and UV-vis spectrometer. Structure of the pigments are spinel and particles' shape are spherical or cubic. Glazed tiles containing 5 wt% pigments were fired at $1260^{\circ}C$ and $1240^{\circ}C$ in reduction atmosphere. Color in glazes were analyzed by UV-vis spectrometer. Colors of NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole% in lime glaze showed black in oxidation, in reduction NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.55{\cdot}Mn_2O_3$ 0.0125 mole% showed black. In case of lime-barium glaze, NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.975 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black color in oxidation and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.725 MnO $0.275{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black one in reduction.

LCD Colorfilter용(用) Millbase의 분산특성과 레올로지 거동 (The Rheological Behavior and Dispersion Properties of Millbase for LCD Colorfilters)

  • 나대엽;정일봉;남수용;유춘우;최용정
    • 한국전기전자재료학회논문지
    • /
    • 제20권5호
    • /
    • pp.450-455
    • /
    • 2007
  • LCD color filters have been manufactured in a process called photolithography to date, but various printing methods have been studied currently in response to the trend of low-end LCD panels. Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the systematic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented. Subsequently, this thesis attempts to find out the dispersive characteristics as well as the selection of pigments, monomers and dispersants in the part of millbase among the stages of manufacturing LCD color filters using the direct printing methods. The dispersive characteristics were shown through analytic devices such as PSA, Rheometer, etc.

감마선 조사가 건멸치의 이화학적 품질안정성에 미치는 영향 (Physicochemical Quality of Boiled-Dried Anchovies during Post-Irradiation Period)

  • 권중호;변명우;김영회
    • 한국식품영양과학회지
    • /
    • 제25권3호
    • /
    • pp.484-490
    • /
    • 1996
  • Physicochemical changes were determined for the boiled-dried anchovies packaged in a laminated film(nylon 15${\mu}{\textrm}{m}$/polyethylene 100${\mu}{\textrm}{m}$) and stored for one year at ambient and cooling(5~1$0^{\circ}C$) temperatures after gamma irradiation. Lipophilic and hydrophilic browning pigments increased with storage time particularly at ambient temperature, even though initial 5 kGy irradiation did not affect the formation of pigments significantly. This results were confirmed by the instrumental color determinations, Hunter color L, a, b and ΔE. With respect to changes in relative fatty acid compositions, storage period and temperature were more influential factors than gamma irradiation. Irradiation at 5 kGy induced insignificant changes in the total flavor profiles of stored anchovies, which were mainly composed of n-dodecanal(26.7%), n-pentadecane(22.2%), n-octanal(4.9%) and 2-pentylfuran(3.4%).

  • PDF