• Resources Recycling
• /
• v.19 no.6
• /
• pp.86-92
• /
• 2010

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. but the color of concrete is very monotony, so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial granulated blast furnace slag and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that the flow dropped mixing of pigment. but flow increased in proportion to the mixing rate in occasion of mortar that mix granulated blast furnace sla and black mortar which was made granulated blast furnace slag has more visible black color than any mortar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.3
• /
• pp.197-207
• /
• 2024

This study aims to evaluate the color stability and surface roughness of the single-shade composite resin after finishing and polishing for primary molars. A single-shade composite resin (OM, OMNICHROMA) and two multi-shade composite resins (FT, Filtek^TM Z350XT; ES, ESTELITE^® SIGMA QUICK) were included. The specimens were divided into three subgroups using different polishing methods: control, Sof-Lex XT, and Sof-Lex Diamond. For color stability tests, cavities were prepared on extracted primary second molars and restored with experimental composite resins. Each specimen was immersed in the coffee solution for 48 hours. The color difference of each specimen was calculated. For surface roughness tests, cylindrical specimens were crafted with experimental composite resins. Surface roughness was analyzed using an atomic force microscope and a scanning electron microscope. In the color stability tests, FT demonstrated a significantly lower ΔE_ab than ES among the control groups, but no significant differences were observed between the ΔE_ab values of OM and FT or OM and ES. Additionally, no significant differences were found between the Sof-Lex XT and Sof-Lex Diamond subgroups in the three composite groups. Moreover, no significant differences in the surface roughness were found between the three composite groups, regardless of the polishing methods. The single-shade composite resin demonstrated comparable color stability and surface roughness to that of the multi-shade composite resins regardless of the polishing methods used in restoring primary molars. The single-shade composite resin is expected to be applicable in clinical pediatric dentistry reducing chair time due to the easy shade matching procedures.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.123-127
• /
• 2010

Fluorescent white organic light-emitting diodes showing high color-rendering indices (CRIs) of up to 81 was demonstrated, with a silicon-cored anthracene derivative (PATSPA) doped with DPAVBi utilized as the deep-blue host and dye materials, and the commercial dyes rubrene and DCM2 utilized as the orange- and red-light-emitting dyes. The devices, consisting of three emissive layers, showed bright-white-light emission, but the ratio of the blue peak to the orange and red peaks changed with the current density and the thickness of the blue emissive layer. A high CRI was achieved with the use of a deep-blue emitter doped in a novel host and by optimizing the blue-layer thickness. The device with a blue-layer thickness of 10 nm showed the Commission Internationale de l'Eclairage (CIE) color coordinate of (0.33, 0.35), a high CRI of 81, and a moderate external quantum efficiency of 2% at a current density of $2.5\;mA/cm^2$.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.164-166
• /
• 1995

The objectives of study are to develop a peripheral device on the endoscopic surgery system. These systems are consist of the following units. They are a color monitor of high resolution, light source, computer system and endoscopic camera with a C-mount head, irrigator, color video printer, Super VHS recorder and a system rack. The color monitor is a NTSC monitor for monitoring the image projected of the surgical section. The lightsource is necessary to irradiate the interior of a body via an optic fiber, The light projector will adapt the brightness in accordance with changing distance from the object. A miniature camera using a color CCD chip and computer system is used to capture and control an image of the surgical section[1]. The video printer is a 300 DPI resolution using thermal sublimation methods, which is developed by Samsung Electronics Co., Ltd. The specification of the endoscopic data management system is consist of storage of a captured image and pathological database of patients [2-4].

• Journal of Dairy Science and Biotechnology
• /
• v.37 no.2
• /
• pp.108-114
• /
• 2019

Aronia melanocarpa (black chokeberry) powder containing various bioactive compounds is widely used in the food industry. We examined the sensory attributes (taste, color, flavor, texture, and overall acceptability) of market milk, yogurt, and Kefir containing different concentrations of Aronia melanocarpa powder. In market milk, the scores of all categories except color were the same or lower in market milk containing 0.5%, 1.0%, 1.5%, or 2% Aronia melanocarpa powder than the control group (0%). No statistical difference in color and flavor was observed between Kefir and yogurt. However, there was a statistical difference between the control and treated groups in taste, texture and, overall acceptability (p<0.05). As the content of Aronia melanocarpa powder increased, color, flavor, taste, and overall acceptability scores generally decreased. Yogurt and Kefir, with the addition of 1% Aronia melanocarpa powder, displayed the highest scores.

• Journal of Information Display
• /
• v.7 no.3
• /
• pp.19-22
• /
• 2006

White polymeric light-emitting devices (WPLEDs) have been fabricated from polyfluorene-based (PFO) blue and MEH-PPV polymer blending systems. A device structure of ITO / PEDOT:PSS / Blending polymer / Blue polymer / LiF / Al was employed. This structure of double emission layers showed significant improvement of white color shift phenomenon. A current efficiency of 4.67 cd/A (3,900 $cd/m^{2}$, 6.4 V) and a brightness value of 17,600 $cd/m^{2}$ at 9.4 V with (0.34, 0.35) CIE coordinates at 5 V and (0.29, 0.29) at 9 V were achieved achieved.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.96-96
• /
• 2020

Soybean seeds are important sources of non-nutritive health promoting metabolites. The contents of these metabolites are affected by both genetic and environmental factors. In the present study, the contents of five common isoflavones including daidzin, genistin, glycitin, malonyldaidzin, and malonylgenistin were analyzed in 72 soybeans of different seed coat colors, diversity, and of different origins including China (22), Japan (9), USA (12), India (4), and Korea (25). The average total isoflavone content (TIC) was maximum in Indian soybeans (3302.36 ㎍/g) and minimum in Chinese landraces (1214.95 ㎍/g). The Korean landraces had higher average TIC (2148.05 ㎍/g) than the USA genetic materials (1580.23 ㎍/g) and Japanese landraces (1485.99 ㎍/g). The content of malonylgenistin was in the range of 54.31 - 2385.68 ㎍/g in the entire population, and was the most abundant isoflavone irrespective of origin although there was content variation among individual soybeans. Besides, glycitin was the least concentrated isoflavone, and its content ranged from 0.00 to 79.79 ㎍/g. With respect to seed coat color, green soybeans from all countries displayed the maximum malonylgenistin and TIC contents. Exceptions were those of Korean and Indian origins where black and yellowish-green soybeans presented the highest malonylgenistin and TIC contents, respectively. In multivariate analysis, 92.72% of the variance was explained by the first two principal components, and the soybeans were grouped in to three clusters based on isoflavone contents. Overall, our findings signify the importance of seed coat color and origin as discriminant parameters, and provide wide spectrum of routes for breeding soybean cultivars.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.2 s.57
• /
• pp.89-91
• /
• 2006

The objectives of this study were to find for suitable chemical reagents to use as a green-color protector for Gardenia jasminoldes Green pigment and to compare the effectiveness of these reagents for discoloration prevention. Gardenia jasminoldes Green treated with polyoxyethylene (POE) (12) dimethicone shouted a greener color than those treated with methoxycinnamidopropyl hydroxysultaine ultraviolet stabilizers after ultraviolet radiation (UVR). The experimental results exhibited that the concentration of the POE (12) dimethicone affected the effectiveness of green-color conservation. The greenest rotor was obtained by treating 0.10 wt% aquous solution of Gardenia jasminoldes Green with 1.0 wt% POE (12) dimethicone aqueous solution and the absorbances of the solutions after UVR were increased from 78% to 95% in comparison with the untreated. In addition, the Gardenia jasminoldes Green aqueous solution mixed with POE (12) dimethicone showed great green-color fastness in outdoor weathering exposure. The mechanism of the green color protection under UVR is unclear, however the dimethicone group of POE (12) dimethicone may play and important role in the stabilization.

• Ocean and Polar Research
• /
• v.35 no.3
• /
• pp.229-237
• /
• 2013

We measured two-dimensional (2-D) oxygen distribution in the surface sediment layer of intertidal sediment using a simple and inexpensive planar oxygen optode, which is based on a color ratiometric image approach. The recorded emission intensity of red color luminophore light significantly changed with oxygen concentration by $O_2$ quenching of platinum(II)octaethylporphyrin (PtOEP). The ratios between the intensity of red and green emissions with oxygen concentration variation demonstrated the Stern-Volmer relationship. The 2-D oxygen distribution image showed microtopographic structure, diffusivity boundary layer and burrow in surface sediment layer. The oxygen penetration depth (OPD) was about 2 mm and the one-dimensional vertical diffusive oxygen uptake (DOU) was 12.6 mmol $m^{-2}d^{-1}$ in the undisturbed surface sediment layer. However, those were enhanced near burrow by benthic fauna, and the OPD was two times deeper and DOU was increased by 34%. The simple and inexpensive oxygen planar optode has great application potential in the study of oxygen dynamics with high spatiotemporal resolution, in benthic boundary layers.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.376-388
• /
• 2020

The purpose of this study was to analyze the current status and contents of color-related education programs as lifelong education and to determine the necessity of color education and directions for future development. The findings of this study, first show that the general welfare center, which is striving to develop abilities and promote welfare, was opened mainly for professional education, rather than hobby-oriented education. Accordingly, pricing was set at a lower level than the three institutions and centers, but without a variety of programs or hobby-oriented courses. Second, as the purpose of the set-up is to be established, the general welfare center should be considered an area for hobbies along with expertise, and various courses should be opened. Although the department store's cultural center focused on programs for cultural and leisure use and promotion, it is necessary to extend the program to attempt to approach it in a short-term process rather than a one-time class. The lifelong education center established as a subsidiary of the university' was opened as an area for of painting such as oil painting and watercolor and drawing which have much in common school should learn and start basic theory and practice, so there was much difference. Third, if it is changed to a developed form of color-oriented education according to the purpose of each center and institution presented in the results of this research, a good response will be possible to further improve the quality of life and develop professionalism and creativity.