• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.1-6
• /
• 2011

In this paper we show the LCD simulator for defect inspection using image processing algorithm and neural network. The defect inspection algorithm of the LCD consists of preprocessing, feature extraction and defect classification. Preprocess removes noise from LCD image, using morphology operator and neural network is used for the defect classification. Sample images with scratch, pinhole, and spot from real LCD color filter image are used. From some experiments results, the proposed algorithms show that defect detected and classified in the ratio of 92.3% and 94.5 respectively. Accordingly, in this paper, a possibility of practical implementation of the LCD defect inspection system is finally suggested.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1437-1442
• /
• 2005

Tongue Diagnosis is the important traditional oriental medical diagnosis method that observes not only the general physiological state but also some kinds of disease. However, manual tongue diagnosis is much influenced by surrounding illumination. Therefore, Digital Tongue Inspection System(DigiTis) is needed for the quantification of objective tongue information, In this research, Tongue images of 98 malignant Neoplasm patients and 34 normal persons were collected by Digital Tongue Inspection System. Statistical analysis of tongue images and patient data indicates that cancer group has more blue-purple components in tongue body(舌質) and yellow components in tongue coating than normal group. Also, there are a lot of rose-pink components in the cancer group of second stage and blue-purple components in the cancer group of third or fourth stage. Our study shows that tongue image is a useful index for distinction between disease and health. Furthermore we need more extended research through the additional sampling and various disease.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.48-56
• /
• 2008

A real-time inspection system has been developed by combining CCD based image processing algorithm and a standard lighting equipment. The system was tested for defective fabrics showing nozzle contact scratch marks, which are one of the frequently occurring defects. Two algorithms used were compared according to both their processing time and detection rate. First algorithm (algorithm A) was based on morphological image processing such as dilation and opening for effective treatment of defective printing areas while second one (algorithm B) mainly employs well-defined edge detection technique based on canny detector and Zermike moment. It was concluded' that although both algorithms were quite successful, algorithm B showed relatively consistent performance than algorithm A in detecting complex patterns.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.26-31
• /
• 2011

In this paper we show the LCD simulator for defect inspection using image processing algorithm and neural network. The defect inspection algorithm of the LCD consists of preprocessing, feature extraction and defect classification. Preprocess removes noise from LCD image, using morphology operator and neural network is used for the defect classification. Sample images with scratch, pinhole, and spot from real LCD color filter image are used. From some experiments results, the proposed algorithms show that defect detected and classified in the ratio of 92.3% and 94.5 respectively. Accordingly, in this paper, a possibility of practical implementation of the LCD defect inspection system is finally suggested.

• Journal of Sensor Science and Technology
• /
• v.33 no.3
• /
• pp.179-184
• /
• 2024

In the car industry, welding is a fundamental linking technique used for joining components, such as steel, molds, and automobile parts. However, accurate inspection is required to test the reliability of the welding components. In this study, we investigate the detection of weld beads using 2D image processing in an automatic recognition system. The sample image is obtained using a 2D vision camera embedded in a lighting system, from where a portion of the bead is successfully extracted after image processing. In this process, the soot removal algorithm plays an important role in accurate weld bead detection, and adopts adaptive local gamma correction and gray color coordinates. Using this automatic recognition system, geometric parameters of the weld bead, such as its length, width, angle, and defect size can also be defined. Finally, on comparing the obtained data with the industrial standards, we can determine whether the weld bead is at an acceptable level or not.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.725-732
• /
• 2011

Purpose: Skin grafting is one of the most commonly used methods in reconstructive plastic surgery field, but complications such as color change, contracture or hypertrophy are common problems. However, pathophysiology of the color change after skin graft is not yet determined and no animal model is established. Methods: Full thickness skin grafts were performed on the dorsum of C57BL/6 mice. Serial chronological gross inspection for color change and pigmentation were examined. Melanin pigments were traced by Fontana-Masson staining and semi-quantitative analysis was performed. In addition, immunohistochemical staining of S-100, Micropthalmia related Transcription Factor (MITF) and Melan-A antibodies were also performed to observe melanocytes and their changes. Results: After skin graft, color change and pigment spots were observed in the graft. Fontana-Masson staining showed melanin pigments in the epidermal and dermal layers in all mice. Immunohistochemistry staining to S-100, MITF, Melan-A antibodies showed melanocytes at the basal layer of epidermis and dermis. Conclusion: In conclusion, we have established an animal model for skin pigmentation after skin graft. We believe this study may be useful in understanding of the behavior of melanocytes after skin graft.

• Journal of Biosystems Engineering
• /
• v.35 no.3
• /
• pp.197-205
• /
• 2010

An automatic echelon feeder of brown rice was presented for quality inspection system using color image processing. A echelon feeder was developed with vibratory feeder and cylindrical indent singulator having oblique light. The vibratory feeder consisted of a hopper, electromagnetic vibrator and multichannel grooves and supply the grain sample to the singulator. The feeding performance such as feed rate, blocking frequency of the channel was dependent on the size of groove and vibration pattern. A cylindrical indent singulator consisted of a rotating cylinder, prisms and a tungsten-halogen light source. It delivered grain kernels under the camera in a echelon form and illuminate the kernels with oblique ray and ambient light. The size of the indents installed on the surface of the rotating cylinder was determined by the dimensions of the paddy and a small triangular prism was placed in each indent to apply $ 20^{\circ}$ oblique light to the grain kernel.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.3
• /
• pp.182-188
• /
• 2000

High-frequency electric resistance welding (HERW) technique is one of the most productive manufacturing method currently available for pipe and tube production because of its high welding speed. In this process, a heat input is controlled by skilled operators observing color and shape of bead but such a manual control can not provide reliability and stability required for manufacturing pipes of high grade quality because of a variety of bead shapes and noisy environment. In this paper, in an effort to provide reliable quality inspection, we propose a neural network-based method for classification of bead shape. The proposed method utilizes the structure of Kohonen network and is designed to learn the skill of the expert operators and to provide a good solution to classify bead shapes according to their welding conditions. This proposed method is implemented on the real pipe manufacturing process, and a series of experiments are performed to show its effectiveness.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.365-366
• /
• 2007

Micro jetting drop inspection system is essential to measuring micro drop volume. Measuring pico-liter drop volume is useful for new LCD color filter product process that is based on inkjet printing technology. To upgrade the reliability in drop measurement system, we use the auto focusing & multi drop reiteration & blurring average algorism. First of all we used standard mark for gage R&R in the vision system. Finding the most suitable threshold for multi blurring drop, is the main key of this research. Sensitivity of vision system is a standard in measuring the upgrade system level. So, suitable threshold can upgrade the performance of jetting drop inspection system.

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.133-146
• /
• 1999

Green tea is popular as health food these days and has effects of anti-cancer and an-agering. A various Foreign countries produce green health cookie adding the first, the second and third classes green tea on a commercial. The cookie is produced by wheat flour adding 4% green tea. The changes of taste depending on the quality of green tea are examined through the five sense and the mechanical inspection. The results are as follow: First, as the quality of green tea is higher score is achieved. Second, as the quantity of green tea is increased, the goods are harder in the five sence inspection. Third, as the quality of green tea is higher, brightness is lower in the measurement of color. Therefore, this study indicates that it is desirable to use the good qualify of green tea in case of producing cookie on a commercial scale.