• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.102-111
• /
• 2015

This paper proposes an algorithm for recovering the colors of objects from multiple near-infrared (near-IR) images. The International Commission on Illumination (CIE) color coordinates of objects are recovered from a series of gray images captured under multiple spectral near-IR illuminations using polynomial regression. The feasibility of the proposed algorithm is tested experimentally by using 24 color patches of the Color Rendition Chart. The experimental apparatus is composed of a monochrome digital camera without an IR cut-off filter and a custom-designed LED illuminator emitting multiple spectral near-IR illuminations, with peak wavelengths near the red edge of the visible band, namely at 700, 740, 780, and 860 nm. The average color difference between the original and the recovered colors for all 24 patches was found to be 11.1. However, if some particular patches with high value are disregarded, the average color difference is reduced to 4.2, and this value is within the acceptability tolerance for complex image on the display.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.431-438
• /
• 2016

In this paper, we present an upsampling technique for depth map image using color and depth weights. First, we construct a high-resolution image using the bilinear interpolation technique. Next, we detect a common edge region using RGB color space, HSV color space, and depth image. If an interpolated pixel belongs to the common edge region, we calculate weighting values of color and depth in $3{\times}3$ neighboring pixels and compute the cost value to determine the boundary pixel value. Finally, the pixel value having minimum cost is determined as the pixel value of the high-resolution depth image. Simulation results show that the proposed algorithm achieves good performance in terns of PSNR comparison and subjective visual quality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.926-932
• /
• 2017

Image distortion can occur when photographing deep sea targets with an optical camera. This problem arises because sunlight is not sufficiently transmitted due to seawater and various floating particles of dust. Particularly, color distortion takes place, causing green and blue color channels to be over emphasized due to water depth, while distortion of boundaries also occurs due to light refraction by seawater and floating particles of dust. These distortions degrade the overall quality of underwater images. In this paper, we analyze underwater images of the bottom of vessels. Based on the results, we propose a technique for color correction and edge enhancement. Experimental results show that the proposed method increases edge clarity by 3.39 % compared to the effective edges of the original underwater image. In addition, a quantitative evaluation and subjective image quality evaluation were concurrently performed. As a result, it was confirmed that object boundaries became clear with color correction. The color correction and contour enhancement method proposed in this paper can be applied in various fields requiring underwater imaging in the future.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.325-332
• /
• 2003

This study was to develop a system for grading apples by their color using statistical image processing. T-test was used to detect edges in apple images and the chain code method was used for contour coding. The histogram and mean gray level of each RGB channel in a ring-shaped region was used to compare apple colors to reference apple color.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.9
• /
• pp.59-67
• /
• 1992

Color image enhancement can be achieved easily by using linear form of coordinate system. But some popular color coordinate systems almost have nonlinear characteristics in the geometric form. In this paper, the proposed coordinate system has pseudo-linear form and based on IHS system which represents human color perception appropriately. And for the image intensity processing, an edge-preserving smoothing algorithm is presented.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.67-72
• /
• 2019

This paper proposes a new method for the recognition of resistor color band using a color segmentation in a HSI color model. The proposed method firstly segments a resistor in a chromatic color as a ROI from a background. Secondly, the color bands of the resistor are segmented by vertical projection profile using both the intensity and the saturation differentiation and finally, it recognizes the colors of the segmented color bands using hue, saturation and intensity values. The final results are the value of the resistor and the names of the recognized color. The proposed method is implemented using C language in Raspberry Pi system with a camera module for a real-time image processing. Experiments were conducted by using various resistor images. The results show that the proposed method is successful for the recognition of resistor color band.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.97-101
• /
• 1987

The edge, a discontinuity or abrupt change in the gray-level or color, is a fundamentally important primitive feature of an image necessary for the image analysis and classification. Two-dimensional 3x3 compass gradient operators (ex. Sobel, Prewitt, and Kirsch operators)are commonly used in the edge detection and usually detect 8 compass directional components. In this paper, we present a new interpretation of the relationships between the resulting 8 gradient magnitudes and the 8 intensity values of neighboring pixels which are covered by the two-dimensional 3x3 mask. It is expected that a new gradient edge operator may be designed by changing the eigenvalues in the transform domain and the fast optical edge operator may be implemented by using the optical system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.26-36
• /
• 2006

In this paper, we propose a cost-effective color filter may (CFA) demosaicing method for digital still cameras in which a single CCD or CMOS image sensor is used. Since a CFA is adopted, we must interpolate missing color values in the red, green and blue channels at each pixel location. While most state-of-the-art algorithms invest a great deal of computational effort in the enhancement of the reconstructed image to overcome the color artifacts, we focus on eliminating the color artifacts with low computational complexity. Using spatial correlation of the adjacent pixels, the edge-directional information of the neighbor pixels is used for determining the edge direction of the current pixel. We apply our method to the state-of-the-art algorithms which use edge-directed methods to interpolate the missing color channels. The experiment results show that the proposed method enhances the demosaiced image qualify from $0.09{\sim}0.47dB$ in PSNR depending on the basis algorithm by removing most of the color artifacts. The proposed method was implemented and verified successfully using verilog HDL and FPGA. It was synthesized to gate-level circuits using 0.25um CMOS standard cell library. The total logic gate count is 12K, and five line memories are used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.847-852
• /
• 2010

Text in natural images has a various and important feature of image. Therefore, to detect text and extraction of text, recognizing it is a studied as an important research area. Lately, many applications of various fields is being developed based on mobile phone camera technology. Detecting edge component form gray-scale image and detect an boundary of text regions by local standard deviation and get an connected components using Euclidean distance of RGB color space. Labeling the detected edges and connected component and get bounding boxes each regions. Candidate of text achieved with heuristic rule of text. Detected candidate text regions was merged for generation for one candidate text region, then text region detected with verifying candidate text region using ectilarity characterization of adjacency and ectilarity between candidate text regions. Experctental results, We improved text region detection rate using completentary of edge and color connected component.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.738-747
• /
• 2015

It is difficult to use a recognition algorithm of an image in a foggy environment because the color and edge information is removed. One of the famous defogging algorithm is haze removal by using 'Dark Channel Prior(DCP)' which is used to predict for transmission rate using color information of an image and eliminates fog from the image. However, in case that the image has factors such as sunset or yellow dust, there is overemphasized problem on the color of certain channel after haze removal. Furthermore, in case that the image includes an object containing high RGB channel, the transmission related to this area causes a misestimated issue. In this paper, we purpose an enhanced fog elimination algorithm by using improved color normalization and haze rate revision which correct mis-estimation haze area on the basis of color information and edge information of an image. By eliminating the color distortion, we can obtain more natural clean image from the haze image.