• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.473-480
• /
• 2009

The 180 minutes fire test based on the standard curve of ISO-834 were conducted on three RC column specimens with different constant axial loading ratios to evaluate the fire performance of fiber cocktail (polypropylene+steel fiber) reinforced high strength concrete column. The columns were tested under three loading levels as 40%, 50%, and 61% of the design load. No explosive spalling has been observed and the original color of specimen surface has been changed to light pinkish grey. The maximum axial displacements of three specimens were 1.5~2.2 mm. There was no reduction in load bearing capacity of each specimen exposed to fire and no effect were observed on the fire performance within 61% of the design load. The tendencies of the results with loading, such as the temperature distribution of in concrete and the changes in temperature rise due to the water vaporization in concrete, are very similar to those without loading. The final temperatures of steel rebar after 180 minutes of fire test resulted in 491.4${^{\circ}C}$ for corner rebar, 329.0${^{\circ}C}$ for center rebar, and 409.8${^{\circ}C}$ for total mean of steel rebar. The difference of mean temperature between corner and center rebar was 153.7${^{\circ}C}$ㅍ. The tendency of temperature rise in concrete and steel rebar changed after 30~50 minutes from the starting time of the fire test because the heat energy influx into corner rebar is larger than that into center rebar. The cause of decrease in temperature rise was due to the water vaporization in concrete, the lower temperature gradient of the concrete with steel and polypropylene fiber cocktails, the moisture movement toward steel rebars and the moisture clogging.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.113-123
• /
• 2012

Recently, various attempts have been made to apply Intelligent Transportation System under various environments and conditions. Consequently, an accurate license plate recognition regardless of vehicle location and viewing angle is required. In this paper, we propose a novel license plate recognition system which exploits a) the format of license plates to remove false candidates of license plates and to extract characters in license plates and b) the characteristics of Hangul for accurate character recognition. In order to eliminate false candidates of license plates, the proposed method first aligns the candidates of license plates horizontally, and compares the position and the shape of objects in each candidate with the prior information of license plates provided by Korean Ministry of Construction & Transportation. The prior information such as aspect ratio, background color, projection image is also used to extract characters in license plates accurately applying an improved local binarization considering luminance variation of license plates. In case of recognizing Hangul in license plates, they are initially grouped according to their shape similarity. Then a super-class method, a hierarchical analysis based on key feature points is applied to recognize Hangul accurately. The proposed method was verified with high recognition rate regardless of background image, which eventually proves that the proposed LPR system has high performance regardless of the vehicle location or viewing angle.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.207-213
• /
• 2013

This study was carried out to examine a molecular marker system for parentage test in Jeju Black cattle (JBC). Based on the preliminarily studies, we finally selected for construction of a novel genetic marker system for molecular traceability, identity test, breed certification, and parentage test in JBC and its related industrial populations. The genetic marker system had eight MS markers, five indel markers, and two single nucleotide polymorphisms (SNPs; g.G299T and g.del310G) within MC1R gene which is critical to verify the breed specific genotypes for coat color of JBC differing from those of exotic black cattle breeds such as Holstein and Angus. The results showed lower level of a combined non-exclusion probability for second parent (NE-P2) of $4.1202{\times}10^{-4}$ than those previously recommended by International Society of Animal Genetics (ISAG) of $5.000{\times}10^{-4}$ for parentage, and a combined non-exclusion probability for sib identity (NE-SI) of $2.679{\times}10^{-5}$. Parentage analysis has been successfully identified the JBC offspring in the indigenous population and cattle farms used the certified AI semens for production using the JBC-derived offspring for commercial beef. This combined molecular marker system will be helpful to supply genetic information for parentage test and traceability and to develop the molecular breeding system for improvement of animal productivity in JBC population.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.687-698
• /
• 2012

This study was conducted to monitor and prevent outbreak of insect pestsin dredged soil dumping area after completion of dredging construction in Masan City. Monitoring was carried out using tent trap, colored sticky trap, and CDC light trap. A total of 217,073 individuals belonging to 23 species from 10 families in 3 orders were collected. In overwintering survey using tent trap, 3 species were collected. 2 species (Leptocera fuscipennis (Haliday) and Ephydra japonica Miyagi) of them were outbreak species. In color sticky trap, more than 96% of total individuals were comprised of five species: Urolepis maritima Walker (43%), E. japonica (19%), Fucellia sp. 1 (13%), Philotelma sp. 1 (10%), and Homalometopus sp. 1 (9%). In CDC light trap, three dominant species were Homalometopus sp. 1 (91%), Glyptotendipes tokunagai Sasa (6%), and L. fuscipennis (1%), representing about 98% of the total. To prevent damage caused by outbreak of insect pests, we carried out ecological control methods such as covering the fresh soil in outbreak area, using light trap, pumping up water and so on, minimizing use of thermal fogging and insect growth regulatorwhen the insect pest population was rapidly increasing.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.540-547
• /
• 2009

There needs disease-predictable signs in order to enable preventive diagnosis and therapy. Then traditional Chinese medicine applies various medical diagnostic equipments used in western medicine to diagnosing sub-healthy state. But such data are not originated from inherent oriental medicine, and not obtained easily in ordinary clinical practice. This paper is to provide synopsis of the ante-disease diagno-therapeutics partly and to show predictable data based on the facial shapes and signs, especially of gall bladder's versus bladder's body and masculine versus feminine shape. Ante-disease means not only the complete healthy state, but also the state unseen any symptoms in macrographically in the course of outbreak of disease. It contains two stages, first one is the former state of disease and second one is untransmitted state of disease. The patterns of ante-disease consist of latent disease, pre-disease, transmission type like senescent syndrome, abnormal reactive syndrome(變證), syndrome of transmission and transmutation. The classification with gall bladder and bladder type manifests the differences of shape, color and size of each organ in comparison of the universal and standard figures of the human being. On the other hand, the classification with masculine and feminine shape contrasts the innate sexual difference and the shape, characteristics originated from in itself. These two classification theories have their own pathologic types and syndrome types with each disease so that disease-predictable data can be constructed based on such a relationship. In addition, this diagnostic method by facial shapes and signs is able to be applied to whole stages from prenatal to present state of disease even if the cause and inducement are not clear. Ante-disease diagno-theraputic system by Gall Bladder's versus Bladder's Body and Masculine versus Feminine Shape is getting more important in the chronic and internal disease in comparison of the acute and traumatic disease. So this study is able to make up for the limit of diagnosis on ante-disease in the field of oriental medicine clinic.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.41-52
• /
• 2002

At the beginning of the modern times, orientalism and ethnic character was the main stream of current fashion. Early in the twentieth century, orientalism had a tremendous affect on various areas of society, culture, and art. Particularly, it inspired and activated the design of costume. A great variety of colors and construction of the Orient and geometrical simplicity were based on the creation of modern costume. Ethnic placed weight on the Orient because Japan strengthened competitiveness and China opened the door to foreign countries. Therefore, a large number of the oriental costume produced by a variety of fashion designers. The oriental handicraft, motif and colors of the traditional costume have been used in modern costume. In addition, they are precious ideas for designers. This thesis is about a Study on costume embroidery close to fashion through the oriental embroidery and the concept of oriental embroidery. It is also a study on patterns, skills and colors of the oriental embroidery shown in modern fashion and practical use through the designers works. First, concept, process of change, patterns, skills and colors of the oriental embroidery are mainly discussed. 1.The oriental embroidery consists of life, Buddhism, appreciation and costume embroidery. Embroidery was widely used for a variety of purposes. First, it is to make a good impression and beauty. Second, to decorate many kinds of patterns and shapes. Last, to indicate social status and stages. 2.The origin of the oriental embroidery started in Persia. was It greatly developed in Iran and was introduced in Korea via China. We are reminded of the oriental embroidery of China. China is the original place of oriental embroidery. Oriental embroidery has developed the peculiar embroidery according to each climate, custom and nationality. On the basis of these, the practical use of the oriental embroidery on modern fashion is presented through patterns, skills and colors which leads Korean designers use. Even though the oriental embroidery is not very popular among people owing to a great deal of cost and a demand for labor, the patterns and colors of the embroidery has been already familiar with the contemporaries A more profound study on the oriental embroidery will supply a great deal of material and ideas to the fashion industry. Moreover, an effort to raise self-pride in traditional culture will be also in need.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2004

The wound healing is very complex biological processing including inflammatory, reepithelialization and matrix construction. According to the biological systematic category, the ability of the healing is very different. Generally healing ability of the lower animal group has been known more excellent compared to its higher group. Therefore, lower animals have been used as the experimental model to explore the mechanism of the wound healing or repair. To verify histochemical characteristics of the wound healing, we have used skin of the frog (Bombina orientalis) as known common amphibian. At day 1, 10, and 16, the mucous substance was very actively synthesized and strong positive by PAS and Alcian blue (pH 2.5). Day 10 after wounding, margin of the wound was gradually strong positive by PTAH staining for detection of collagen synthesis. At 3 to 6 hour and day 23 to 27, we have found the cell division was active through the MG-P staining, in which the concentration and division of DNA in nucleus was green to deep blue color.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.43-52
• /
• 2010

Glass was fabricated by using refused coal ore obtained from Dogye coal mine in Samchuk. We additionally used soda ash and calcium carbonate as raw materials to make a glass with the chemical composition of soda-lime glass. And the properties of glass were measured when limestone was used as natural raw materials instead of calcium carbonate as chemical raw materials. Transparent glass was fabricated by melting raw materials at $1550^{\circ}C$ for 1 hr in an electrical furnace. The various kinds of glass samples were fabricated according to the kinds of refused coal ore and glass cullet. The optical properties of transmittance and color chromaticity were measured by UV/VIS/NIR spectrometer and the thermal properties of thermal expansion coefficient and softening point were measured. Transparent glass with the transmittance of over 70% in visible range was fabricated by using normal refused coal ore and black colored glass with the transmittance of 0~35% was fabricated by using shel1 type refused coal ore. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a glass tile and foamed glass panel for construction material.

• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.459-466
• /
• 2012

The objective of this study is to observe growth pattern of grand rapids(lettuce) according to different dexperimental conditions for minimizing its growth period such as composition of nutrient, irradiation time of light source and cultivation mode. The culture of water spray type using seeds of grand rapids was performed during growth period of total 50 days. Experimental conditions consist of five compositions of nutrient (PW 0.5 mS/cm, PW 1.0 mS/cm, PY 0.5 mS/cm, PY 1.0 mS/cm, PW 2.0 mS/cm) and three irradiation times of light source (12h(on) / 12h(off), 18h(on) / 06h(off), 24h(on) / 00h(off)). Illumination was adjusted to ratio of 7:1:1 of red, blue and white color, respectively. Indoor environmental condition for cultivating grand rapids is as follows: temperature (19-$22^{\circ}C$), relative humidity (60-70%) and carbon dioxide (1,000-1,200 ppm). The data were obtained from five iteration tests. The maximum growth level was observed in the experimental condition of 18 hr(on) / 06 hr(off) and PY 1 mS/cm for 1st week of cultivation period, 24 hr(on) / 00 hr(off) and PY 1mS/cm for 2nd week of cultivation period, and 24 hr(on) / 00hr(off) and PW 1 mS/cm for 3rd week of cultivation period, respectively. On the contrary, the minimum growth level was observed in the experimental condition of 18 hr(on) / 06 hr(off) and PW 0.5 mS/cm for 1st week of cultivation period, 12 hr(on) / 12 hr(off) and PW 0.5 mS/cm for 2nd week of cultivation period, and 12 hr(on) / 12 hr(off) and PY 0.5 mS/cm for 3rd week of cultivation period, respectively. Based on the results obtained from this study, it is concluded that the growth level of grand rapids varied with different irradiation time of light source and composition ratio of nutrient according to cultivation period.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.