DOI QR코드

DOI QR Code

석탄 폐석을 이용한 소다라임계 유리의 제조 및 특성 연구

A study on the fabrication of soda-lime glass by using refused coal ore and its properties

  • 임태영 (한국세라믹기술원 전자/광소재센터) ;
  • 정상수 (한국세라믹기술원 전자/광소재센터) ;
  • 황종희 (한국세라믹기술원 전자/광소재센터) ;
  • 김진호 (한국세라믹기술원 전자/광소재센터)
  • 발행 : 2010.02.28

초록

삼척 도계지역의 탄광에서 석탄채취시에 발생되는 석탄폐석을 이용하여 유리를 제조하였다. 소다라임계 화학조성을 갖는 유리를 제조하기 위하여 화학원료로서 소다회, 탄산칼슘 등의 원료를 추가로 사용하였고, 화학원료인 탄산칼슘 대신에 천연광물원료인 석회석을 사용하였을 때의 특성을 검토하였다. 전기로를 사용하여 $1,550^{\circ}C$에서 1시간 용응하여 투명한 유리를 제조할 수 있었다. 석탄폐석의 종류 및 파유리의 종류에 따라 다양한 종류의 유리샘플이 제조되었다. 유리샘플의 투과율 및 색차와 같은 광학적 특성을 UV/VIS/NIR Spectrometer를 이용하여 측정하였고, 또한 열팽창계수 및 연화점과 같은 열적특성도 측정하였다. 그 결과, 일반 선탄경석으로는 70% 이상의 가시광선투과율을 갖는 투명한 유리를 제조할 수 있었으며, 또한 쉘(shell) 타입의 선탄경석으로는 0~35%의 가시광선 투과율을 갖는 검정색의 칼라유리를 제조할 수 있었다. 따라서 석탄폐석을 이용하여 건축재료로서 유리타일이나 발포유리와 같은 유리 2차제품을 제조하는데 활용할 수 있으리라 판단되었다.

Glass was fabricated by using refused coal ore obtained from Dogye coal mine in Samchuk. We additionally used soda ash and calcium carbonate as raw materials to make a glass with the chemical composition of soda-lime glass. And the properties of glass were measured when limestone was used as natural raw materials instead of calcium carbonate as chemical raw materials. Transparent glass was fabricated by melting raw materials at $1550^{\circ}C$ for 1 hr in an electrical furnace. The various kinds of glass samples were fabricated according to the kinds of refused coal ore and glass cullet. The optical properties of transmittance and color chromaticity were measured by UV/VIS/NIR spectrometer and the thermal properties of thermal expansion coefficient and softening point were measured. Transparent glass with the transmittance of over 70% in visible range was fabricated by using normal refused coal ore and black colored glass with the transmittance of 0~35% was fabricated by using shel1 type refused coal ore. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a glass tile and foamed glass panel for construction material.

키워드

참고문헌

  1. S.B. Jeong, "Effective utilization for the domestic coal refuse", Korea Insititute of Geoscience & Mineral Resources (2005).
  2. B.S. Kim, "Development of a pyrometallurgical process for recovering precious metals simultaneously from the ovsolete printed circuit boards (PCBs) & spent autocatalysts", Annual Report, Korea Insititute of Geoscience & Mineral Resources (2002) 10.
  3. Y. Ryu and Y. Kim, "A study on the surface modification of artificial lightweight aggregates by using bottom ash from coal power plant", J. Kor. Crystal Growth and Crystal Technology 19 (2009) 208.
  4. M. Song, I.B. Jang, B.S. Cho, I.H. Kim, Y.R. Kim and M.H. Kim, "An experimental study on properties of mortar using bottom ash produced in power plant", J. Architectural Institute of Korea 23 (2003) 202.
  5. K.D. Kim and S.G. Kang, "Manufacturing artificial lightweight aggregates using coal botom ash and clay", J. Kor. Crystal Growth and Crystal Technology 17 (2007) 277.
  6. K. Kim and S. Kang "Manufacturing artificial lightweight aggregates using coal botom ash and its application to the lightweight-concretes", J. Kor. Crystal Growth and Crystal Technology 18 (2008) 211.
  7. H.J. Moon, "A study on the effect of blast furnace slag on the characteristics of soda-lime-silica glass", Paichai Univ. (2005).
  8. B.H. Kim, "Glass technology", Chungmoon Gak (1986).
  9. T. Suzuki, "Data book of glass composition", The Glass Manufacturers' association in Japan (1991).

피인용 문헌

  1. A study on the fabrication of foamed glass by using refused coal ore and its physical properties vol.21, pp.6, 2011, https://doi.org/10.6111/JKCGCT.2011.21.6.266
  2. Fabrication and characterization of glass with E-glass fiber composition by using silica-alumina refused coal ore vol.23, pp.4, 2013, https://doi.org/10.6111/JKCGCT.2013.23.4.180
  3. Effects of forming and cooling temperature on the opaque properties of translucent opal glass for the glass diffuser of LED lighting vol.23, pp.5, 2013, https://doi.org/10.6111/JKCGCT.2013.23.5.246
  4. Characteristics of green colored opal glass with contents of iron oxide for LED light diffuser vol.24, pp.3, 2014, https://doi.org/10.6111/JKCGCT.2014.24.3.120
  5. The properties of AR(Alkali Resistant)-glass fiber by zirconia contents vol.25, pp.6, 2015, https://doi.org/10.6111/JKCGCT.2015.25.6.263
  6. Performance of Alkali-Resistant Glass Fibers Modified with Refused Coal Ore vol.58, pp.5, 2017, https://doi.org/10.2320/matertrans.M2016321