• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5565-5570
• /
• 2014

Objectives: This study aimed to characterize the histopathological pattern of thyroid lesions among Saudi patients and to highlight the age and gender variations of these lesions as base line data. Materials and Methods: We retrospectively analyzed the data from thyroid specimens received at the Department of Pathology, King Fahad Hospital, Madinah, Saudi Arabia from January 2006 to December 2013. Results: The 292 thyroidectomy specimens received during the study period came from 230 (78.8%) females and 62 (21.2%) males giving a female: male ratio of 3.7:1. Age of the patients ranged from 14 to 95 years with a mean age 39.7 years. Two hundred and eleven (72.3%) cases were found to be non-neoplastic and 81 (27.7%) cases were neoplastic. The non-neoplastic group included: colloid goiter, including both diffuse and nodular goiter (170 cases; 58.2%), nodular hyperplasia (28 cases; 9.6%), Hashimoto/chronic lymphocytic thyroiditis (12 cases; 4.1%), and Grave's disease (1 case; 0.3%). In neoplastic lesions, there were 7 benign tumors and 74 malignant tumors. Among the benign tumors, 5 were follicular adenomas and 2 were Hurthle cell adenomas. Papillary carcinoma was the commonest malignant tumor accounting for 87.8% of all thyroid malignancies, followed by lymphoma, follicular carcinoma and medullary carcinoma. The size of papillary carcinoma was more than 2 cm in 40 cases (76.9%). Conclusions: Non-neoplastic thyroid lesions were more common than neoplastic ones. Colloid goiter was the most common lesion. Follicular adenoma was the commonest benign tumor and papillary carcinoma was the commonest malignant lesion. There appears to be a slightly increased trend of papillary carcinoma diagnosis, most being diagnosed at an advanced stage.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.263-270
• /
• 2012

Two kinds of uranium species, oxidized uranium(VI) and reduced uranium(IV), were prepared to be interacted with goethite and montmorillonite to identify sorption characteristic of uranium species, which are very sensitive to the redox-reaction. The reduced uranium was prepared by diluting a substantial uranium(IV) that was concomitantly produced during a sulfate reduction via a sulfate-reducing bacterium. The sorption amount of uranium(IV) by the minerals was relatively lower than that of uranium(VI) because the aqueous uranium(IV) had fine colloidal forms to cause its weak adsorption onto the mineral surfaces. We found that the uranium(IV) phase has a nano-colloid character by the transmission electron microscope, suggesting that the uranium species possibly migrating with the flow of groundwater in underground environments can be the colloidal uranium(IV) as well as the ionic uranium(VI).

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2015

Various types of inorganic and organic colloids are present in natural water including groundwater. Previous studies showed that Fe, Mn and Al are colloid-forming elements and dissolved concentrations can be erroneous for these elements if water samples are not properly filtered. Dissolved concentrations of elements including Ca, Na, Mg, K, Fe, Mn, Si and Al in groundwater from alluvial and bedrock aquifers, and surface water near Nakdong River were determined to evaluate effects of colloids on dissolved concentrations in natural water samples using various pore sizes of filters. Groundwater is mostly anoxic and have elevated concentrations of Fe and Mn, which provides a unique opportunity to observe the effects of colloids on dissolved concentrations of colloid-forming elements. Membrane filters with four kinds of pore sizes of 1000 nm, 450 nm, 100 nm, and 15 nm were used for filtration of water samples. Concentrations of dissolved concentrations in each filtrate did not show significant differences from 1000 nm to 100 nm. However, concentrations of all elements considered were decreased in the filtrates obtained using 15 nm pore size filters by 10 to 15% compared to those using 450 nm except for bedrock groundwater. Al in surface water showed a distinct linear decrease with the decrease of filter pore sizes. These results showed that 100 nm pore size had little effect to remove colloidal particles in alluvial groundwater and surface water in our study. In contrast, significant concentration decreases in 15 nm pore size filtrates indicate that the presence of 15 to 100 nm colloidal particles may affect determination of dissolved concentrations of elements in natural water.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.134-142
• /
• 2011

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Exhaust pipes with circular fin were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The gases examined in this study were oxides of nitrogen (NOx), carbon dioxide ($CO_2$) and carbon monoxide (CO). In addition, $O_2$ concentration in the exhaust was measured. The designs adopted in this study were about exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe technique. The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10 nm), surface forces are increasingly important. Nano particles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. The current tools for directly measuring interaction forces such as a surface force apparatus or atomic force microscopy (AFM) are limited to particles much larger than nano size. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^4$ by free convection and Re=$3.36{\times}10^4$ by forced air furnace.

• Korean Journal of Materials Research
• /
• v.16 no.8
• /
• pp.524-528
• /
• 2006

On the synthesis of Au/$TiO_2$ core-shell structure nanoparticle, the effect of concentration of $Ti^{4+}$ and reaction temperature on the morphology and optical property of Au/$TiO_2$ core-shell nanoparticles is examined. A gold colloid was prepared by $HAuCl_4{\cdot}4H_2O\;and\;C_6H_5Na_3{\cdot}2H_2O$. Titanium stock solution was prepared by mixing solution of titanium(IV) isopropoxide (TTIP) and triethanolamine (TEOA). The concentrations of $Ti^{4+}$ stock solution were adjusted to $10.01{\sim}0.3$ mM, and then the gold colloid is added to the $Ti^{4+}$ stock solution. Au/$TiO_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of the $Ti^{4+}$ stock solution at $80^{\circ}C$. The size of synthesized Au nanoparticles was 15 nm. The thickness of $TiO_2$ shell on the surface of gold particles was about 10 nm. The absorption peak of synthesized Au/$TiO_2$ core-shell nanoparticles shifted towards the red end of the spectrum by about 3 nm because of the formation of $TiO_2$ shell on the surface of gold particles. The good $TiO_2$ shell is produced when $Ti^{4+}$ concentration is varied between 0.01 and 0.05 mM, and reaction temperature is maintained at $80^{\circ}C$. The crystal structure of $TiO_2$ shell was amorphous.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.527-530
• /
• 2013

I present the behavior of colloidal adsorption to an oil-water interface in the presence of electrolyte in an aqueous subphase. The optical laser tweezers and the piezo controller are used to trap an individual polystyrene microsphere in water and forcibly transfer it to the interface in the vertical direction. Addition of an electrolyte (i.e., NaCl) in the aqueous subphase enables the particle to attach to the interface, whereas the particle escapes from the trap without the adsorption in the absence of the electrolyte. Based on the analytical calculations of the optical trapping force and the electrostatic disjoining pressure between the particle and the oil-water interface, it is found that a critical energy barrier between them should exist. This study will provide a fundamental understanding for applications of colloidal particles as solid surfactants that can stabilize the immiscible fluid-fluid interfaces, such as emulsions (i.e., Pickering emulsions) and foams.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.117-124
• /
• 2011

This study was made on the poly(vinyl acetate) (PVAc) and poly(vinyl acetate- ethylene) (VAE) emulsion polymer blend which used PVA as protective colloid, and the PVA used as protective colloid was existed in each emulsion film before blend and even in the film after the blend consecutively. It makes us expect excellent adhesive power among particles that form the blend. Emulsion blends with different Tg are important target of concerning, and PVAc/VAE emulsion blend suggested simple and excellent research method. As a result of blend, elongation was lowered by the increase of PVAc, and the plasticizer used in making PVAc affected on the Tg of blend and lowered Tg of VAE emulsion, and the synergy effect of two blends was seen for the tensile strength, thermal resistance, and adhesive strength.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.222-227
• /
• 2010

This study added Au colloid in martial of conventional contact lens in various concentrations and copolymerized by heating at $70^{\circ}C$ for 40 minutes, $80^{\circ}C$ for 40 minutes, and finally, $100^{\circ}C$ for 40 minutes. Using the polymer produced through the copolymerization process, we have produced a contact lens and measured the physical characteristics which showed oxygen transmissibility of $9{\sim}12{\times}10^{-9}$ cm/s mL $O_2$/mL ${\times}$ mmHg, water content of 27.84% ~ 32.17%, refractive index of 1.432 ~ 1.443, visible transmittance of 83.2% ~ 89.5% and tensile strength of 0.141 kgf ~ 0.152 kgf. The polymer satisfied the physical properties required to produce contact lenses. Also, we judged that the polymer is suitable to be applied as a functional material for ophthalmological purposes.

• Clean Technology
• /
• v.18 no.4
• /
• pp.331-340
• /
• 2012

Synthetic methods of colloids have been significantly developed in industry due to their significant demand for preparation of functional particles. Recently, dynamic/static microfluidic system has emerged as a promising route to the synthesis of the particles, providing precise control of physical and chemical properties such as size, shape, porosity, surface roughness, and surface functionality. These formed particles can be potentially used in various applications including medical diagnostics, photonic device, and biological industry. In addition, these particles provide a novel route to create new materials via their directed self-assembly, and it enable to study and predict the natural phenomenon by mimicking of the nature. Therefore, we describe recent progress for functional colloid particles and its applications.

• The Korean Journal of Nuclear Medicine
• /
• v.16 no.1
• /
• pp.63-72
• /
• 1982

Hepatoscintigram has been a useful diagnostic method for the liver diseases since 1953, but reasonable diagnostic criteria for parenchymal liver diseases are not yet accurately established. For the purpose of searching for more advanced diagnostic criteria for various types of live disease by the liver scan, a retrospective study was made of 272 cases who underwent both hepatoscintigram with 198 Au colloid and liver biopsy in Hanynag University Hospital from Jan., 1978 to Dec., 1981. The results were as follows: 1. Fuzzy margin (irregular indentation of the liver margin) in the hepatoscintigram was noted in 226 cases (97.79%). 2. Of 35 cases with fuzzy margin only, 28 cases (80%) revealed mild parenchymal liver disease, such as acute hepatitis or chronic persistent hepatitis by the liver biopsy. 3. Mottling change (209 cases) was always accompanied by fuzzy margin except only one case, and 31 cases (86.1%) of fuzzy and mottling cases (36 cases) showed mild parenchymal liver disease. 4. Configuration change (193 cases) was usually accompanied with other changes and espicially 104 cases had configuration change with fuzzy and mottling changes. 73 cases (88.44%) of 86 cases with severe configuration change revealed advanced parenchymal liver disease on biopsy. If liver scan showed mild configuration change, we could not decide the type of liver disease only liver scan, and so further studies are needed. 5. Splenic uptake was noted in 34 cases (40.48%) of 84 cases with advanced parenchymal liver disease, and the degree of splenic uptake was for the most part morderate or severe; whereas splenic uptake was noted in 18 cases (16.51%) of the mild parenchymal liver disease (109 cases), and the degree of splenic uptake was largely mild.