• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.609-616
• /
• 2011

In the study, we analyzed the collision characteristics of a so-called arch-type submarine cable protector by considering the changes in drop heights of a stock anchor and material models for concrete and steel reinforcing bars. We considered plastic kinematics model and Johnson-Holmquist Concrete model for the concrete and linear elastic model and plastic kinematics model for the reinforcing bars. The drop heights of 2-ton stock anchor were selected as 3, 5, and 8.83m, respectively. ANSYS, a finite element analysis program, was used for the collision analysis. To save computational time, we converted those drop heights into initial velocities by the principle of energy conservation. From the sensitivity of the material models on the drop height changes, it is shown that the collision response of the reinforcing bars is sensitive firstly on the steel models and secondly on the concrete models, while the collision response of the concrete is sensitive only on the concrete models.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.65-71
• /
• 2008

In many cases, open-type plate breakwaters use plates with multiple holes; the holes serve as energy dissipaters and weight reducers. Because of the multi-holes configuration, stress concentration should be considered during the design process. Among several design loading conditions, the loads from a possible collision with a man-made vessel or other unexpected events many damage a multi-perforated steel plate. In that case, the structural behavior of a multi-perforated steel plate is quite significant, and is not well understood. This study presents a collision analysis for a multi-perforated steel plate. First, four different perforation topologies (three with circles and one with squares) were selected to investigate the effect of different hole shapes on the structural response. Second, the wave force at a specific site was calculated and loaded onto a steel plate as a static load. The static stresses were used for reference values. Third, two rigid body impacters (cubical & cylindrical) were applied to the steel plates to investigate the transient stress responses. In addition, two different impacting angles ($45^{\circ}\;&\;90^{\circ}$) were selected to investigate the angle effect. From the collision analysis, the significance of the transient stresses was emphasized.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.750-759
• /
• 2012

This paper addresses the collision resolution issue to enhance the performance of wireless sensor networks based on IEEE 802.15.4 slotted CSMA/CA. Some solutions in existing work try to solve this issue by adjusting Backoff Exponent (BE) value or Backoff Period (BP). In contrast to the existing solutions, the proposed scheme in this paper aims at providing high system throughput, but also achieving efficient energy consumption of sensor nodes by using Preamble Address (PA). For this, in the proposed scheme, only one sensor node begins data packet transmission by performing PA contention phase with other nodes before sending each data packet. Our simulation results show that the proposed scheme outperforms existing algorithms in terms of energy consumption and throughput.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1053-1061
• /
• 2015

This paper discusses the analysis of the curl deformation behavior when a dynamic force is applied to a tearing tube installed on a flat die to predict the energy absorption capacity and deformation behavior. The deformation of the tips of the curling strips was obtained when the curl tips and tube body are in contact with each other, and a formula describing the energy dissipation rate caused by the deformation of the curl tips is proposed. To improve this formula, we focused on the variation of the curl radius and the reduced thickness of the tube. A formula describing the mean curl radius is proposed and verified using the curl radius measurement data of collision test specimens. These improved formulas are added to the theoretical model previously proposed by Huang et al. and verified from the collision test results of a tearing tube.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1043-1049
• /
• 2009

Broadcast of sink node is used for network management, data collection by query and synchronization in wireless sensor networks. Simple flooding scheme induces the broadcast storm problem. The MPR based broadcast schemes reduce redundant retransmission of broadcast packets. MPR is a set of one hop neighbor nodes which have to relay broadcast message to cover all two hop neighbors. Though MPR can reduce redundant retransmission remarkably, it still suffers from energy waste problem caused by collision and duplicate packets reception. This paper proposes a new MPR based sink broadcast scheme using 3-channel. The proposed scheme reduces energy consumption by avoiding duplicate packet reception, while increases reliability by reducing collision probability remarkably. The results of analysis and simulation show that the proposed scheme is more efficient in energy consumption compared to the MPR based scheme. The result also shows that the proposed scheme reduces delivery latency by evading a contention with other relay nodes and improves reliability of broadcast message delivery by reducing collision probability.

• Journal of Ginseng Research
• /
• v.43 no.3
• /
• pp.368-376
• /
• 2019

Background: In the current phytochemical research on ginseng, the differentiation and structural identification of ginsenosides isomers remain challenging. In this paper, a two-dimensional mass spectrometry (2D-MS) method was developed and combined with statistical analysis for the direct differentiation, identification, and relative quantification of protopanaxadiol (PPD)-type ginsenoside isomers. Methods: Collision-induced dissociation was performed at successive collision energy values to produce distinct profiles of the intensity fraction (IF) and ratio of intensity (RI) of the fragment ions. To amplify the differences in tandem mass spectra between isomers, IF and RI were plotted against collision energy. The resulting data distributions were then used to obtain the parameters of the fitted curves, which were used to evaluate the statistical significance of the differences between these distributions via the unpaired t test. Results: A triplet and two pairs of PPD-type ginsenoside isomers were differentiated and identified by their distinct IF and RI distributions. In addition, the fragmentation preference of PPD-type ginsenosides was determined on the basis of the activation energy. The developed 2D-MS method was also extended to quantitatively determine the molar composition of ginsenoside isomers in mixtures of biotransformation products. Conclusion: In comparison with conventional mass spectrometry methods, 2D-MS provides more direct insights into the subtle structural differences between isomers and can be used as an alternative approach for the differentiation of isomeric ginsenosides and natural products.

• Journal of the Korean Chemical Society
• /
• v.40 no.8
• /
• pp.557-564
• /
• 1996

FAB CAD MS/MS(Fast Atom Bombardment Collision Activated Dissociation Mass Spectrometry/Mass Spectrometry) was used to study different degree of bond stability according to the linkage positions of alkali cationized $(Na^+, Li^+, K^+, NH_4^+)$ stereoisomeric and synthetic oligosaccharides. The alkali metal cations were much more stable, requiring over -40 eV of collision energy vs. only -10 eV for the protonated forms. Of the cations, the potassium cationized trisaccharides were more stable than the others. They would not yield fragment ions under the conditions of collision available in triple quadrupole. Other cationized species exhibited decreasing stability in the series $Nap^+>Li^+>NH_4^+$ using 0.8 mTorr argon pressure in the collision cell. Metal cations of the oligosaccharides maintained charge principally on the amino sugar as shown by shift of all the fragment ions containing the amino sugar. The reason for the higher stability of the metal cationized form is the formation of crown ether-like bond around metal cations, N-acetyl group on GlcNAc and oxygens on fucose moiety. Depending on the metal sizes and the conformation of linkage-isomeric region, cationized species gave linkage dependent fragment patterns and exhibited stability in the series 1-6 > 1-4 > 1-3 linkage.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.7
• /
• pp.823-828
• /
• 1992

A thermionic energy converter test station is constructed for the study of electromagnetic energy generation. Of particular interest is the frequency variations due to changes in the interelectrode gap, the electrode temperature, and the cesium vapor pressure. It is found experimentally that the most intense ratio-frequency(rf) oscillations occur at two non-overlapping regions.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.825-830
• /
• 2009

Pharmaceutical compounds enter the water environment through the diverse pathways. Because their concentration in the water environment was frequently detected in the level of ppt to ppb, the monitoring system should be optimized as much as possible for finding appropriate management policies and technical solutions. One Factor At a Time (OFAT) approach approximating the response with a single variable has been preferred for the optimization of LC-MS/MS operational conditions. However, it is common that variables in analytical instruments are interdependent. Therefore, the best condition could be found by using the statistical optimization method changing multiple variables at a time. In this research, response surface analysis (RSA) was applied to the LC-MS/MS analysis of emerging antibiotic compound, sulfamethoxazole, for the best sensitivity. In the screening test, fragmentation energy and collision voltage were selected as independent variables. They were changed simultaneously for the statistical optimization and a polynomial equation was fit to the data set. The correlation coefficient, $R^2$ valuerepresented 0.9947 and the error between the predicted and observed value showed only 3.41% at the random condition, fragmentation energy of 60 and collision voltage of 17 eV. Therefore, it was concluded that the model derived by RSA successfully predict the response. The optimal conditions identified by the model were fragmentation energy of 116.6 and collision voltage of 10.9 eV. This RSA can be extensively utilized for optimizing conditions of solid-phase extraction and liquid chromatography.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1686-1694
• /
• 2003

The foam-filled tube beams can be used for the front rail and firewall structures to absorb impact energy during frontal or side collision of vehicles. In the case of side collision where bending is involved in the crushing mechanism, the foam filler would be effective in maintaining progressive crushing of the thin-walled structures so that much impact energy could be absorbed. In this study, bending behaviors of the closed-cell-aluminum-alloy-foam-filled stainless steel tube were investigated. The various foam-filled specimens including piecewise fillers were prepared and tested. The aluminum-alloy-foam filling offered the significant increase of bending resistance. Their suppression of the inward fold formation at the compression flange as well as the multiple propagating folds led to the increase of load carrying capacity of specimens. Moreover, the piecewise foams would provide the easier way to fill the thin-walled shell structures without the drawback of strength.