• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1223-1226
• /
• 2003

• 상하수도학회지
• /
• 제18권2호
• /
• pp.201-207
• /
• 2004

Dissolved air flotation (DAF) is a solid-liquid separation process that uses fine rising bubbles to remove particles in water. Most of particle-bubble collision occurs in the DAF contact zone. This initial contact considered by the researchers to play a important role for DAF performance. It is hard to make up conceptual model through simple mass balance for estimating collision efficiency in the contact zone because coupled behavior of the solid-liquid-gas phase in DAF system is 90 complicate. In this study, 2-phase(gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. For the modeling of turbulent 2-phase flow in the reactor, the standard $k-{\varepsilon}$ mode I(liquid phase) and zero-equation(gas phase) were used in CFD code because it is widely accepted and the coefficients for the model are well established. Particle-bubble collision efficiency was calculated using predicted turbulent energy dissipation rate and gas volume fraction. As the result of this study, the authors concluded that bubble size and recycle ratio play important role for flow pattern change in the reactor. Predicted collision efficiency using CFD showed good agreement with measured removal efficiency in the contact zone. Also, simulation results indicated that collision efficiency at 15% recycle ratio is higher than that of 10% and showed increasing tendency of the collision efficiency according to the decrease of the bubble size.

• 폴리머
• /
• 제35권6호
• /
• pp.513-519
• /
• 2011

침투 가능한 구형 모델 유체의 충돌 특성을 고찰하고자 분자 동력학 방법을 이용한 전산 모사를 수행하였다. 이로부터 다양한 범위의 입자 충전 분율 ${\phi}$ 및 척력적 에너지 ${\varepsilon}^*$ 조건에 대한 충돌 빈도수, 평균 자유 행로, 강체형 반사 충돌각 및 연체형 침투 충돌각의 분포도, 유효 충전 분율 등을 계산하였다. 낮은 척력적 에너지 조건에서는 연체형 충돌이 주된 특성이나, 반면 높은 척력적 에너지 조건에서는 강체형 충돌이 주된 요인이었다. 매우 흥미롭게도, 전체 충돌 빈도수에 대한 연체형 충돌비(또는, 강체형 충돌비)는 정준 앙상블의 몬테카를로 전산 모사에서 받아들임 확률(또는, 되돌림 확률)로 표시되는 볼쯔만 인자와 직접적으로 관계되었다. 이와 같은 거동 입자들의 동적 충돌 특성들은 ${\varepsilon}^*{\geqq}3.0$ 및 ${\phi}{\geqq}0.7$ 범위의 높은 척력적 에너지 및 높은 충전 분율 조건에서 제한적이었으며, 이는 침투성 구형 모델에서 나타나는 클러스터 형성 구조를 함축하고 있다.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.976-984
• /
• 2005

This paper presents the analysis results of dynamics in the billiards game within the frame­work of rigid-body mechanics and a numerical simulation program. The friction exists between the ball and the table bed as well as between the ball and the rail. There are three parts in the dynamic behavior of the ball on the table bed; motion of the ball on the table bed, collision between balls, and collision between the ball and the cushion. During the development of the simulation program, the dynamics problems such as rolling motion and three-dimensional frictional impact motion have been analyzed in detail. The theoretical issues are implemented into a viable graphic simulation program and its efficacy is demonstrated through the experi­mental validation of the billiards game. The resulting analysis results are verified quantitatively and qualitatively using high-speed video camera. Through the experimental tests, it was found that the physical parameters such as coefficients of restitution and friction vary according to the motion variables and corresponding empirical formulations were developed. The simulation and experimental results agree well.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1602-1606
• /
• 2008

In the Rail Safety Regulations article 16, deceleration rate in the survival spaces should be limited as far as is practicable to 5g, and shall not be more than 7.5g. As it is impractical to evaluate complete train behaviour by testing, the achievement of the objectives shall be validated by dynamic simulations corresponding to the reference collisions scenarios. But initial design and evaluation procedure, impact dynamics model which classified 1D and 2D is more useful than full scale model. This paper presents acceleration response characteristics between 1D and 2D dynamics model under head-on collision in standard collision scenarios.

• Kyungpook Mathematical Journal
• /
• 제52권4호
• /
• pp.459-472
• /
• 2012

A piecewise smooth system is characterized by non-differentiability on a curve in the phase space. In this paper, we discuss particular bifurcation phenomena in the dynamics of a piecewise smooth system. We consider a two-dimensional piecewise smooth system which is composed of a linear map and a nonlinear map, and analyze the stability of the system to determine the existence of dangerous border-collision bifurcation. We finally present some numerical examples of the bifurcation phenomena in the system.

• 한국소음진동공학회논문집
• /
• 제20권5호
• /
• pp.477-485
• /
• 2010

In this study, we suggested several approaches to evaluate the collision acceleration of a carbody under the article 16 of the Korean rolling stock safety regulations. There are various methods to evaluate the rigid body accelerations such as the displacement comparison method by double integration of filtered acceleration data, the velocity comparison method by direct integration of filtered acceleration data, and the analysis method of a velocity-time curve. We compared these methods one another using the 1D dynamic simulation model of Korean high-speed EMU composed of nonlinear springs or bars, dampers, and masses. From the simulation results, the velocity-time curve analysis method and the displacement comparison method are recommended to filter high frequency oscillations and evaluate the maximum and average accelerations of a carbody after a train collision.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.233-237
• /
• 2009

In this study, we suggest that several approaches to evaluate the collision acceleration value of a car in the article 35 and the guideline 16 of Korean rolling stock safety regulation. There are various methods to evaluate collision acceleration such as; a displacement comparison method by the double integration of filtered acceleration data, a velocity comparison method by the integration of filtered acceleration data, an analysis method of time-velocity curve, or a differential method of time-velocity curve. We compared these methods one another using 1D dynamic simulation model composed of nonlinear dampers, springs and bars, and masses. Also, we applied these methods to a hybrid model, which is made of 3D shell element model and 2D collision dynamics model, in order to evaluate whether 1D force-displacement curve modeling for energy absorbing structures have an effect on the collision acceleration levels or not.

• Structural Engineering and Mechanics
• /
• 제59권4호
• /
• pp.683-701
• /
• 2016

Safety is the prime concern for a high-speed railway bridge, especially when it is subjected to a collision. In this paper, an analysis framework for the dynamic responses of train-bridge systems under collision load is established. A multi-body dynamics model is employed to represent the moving vehicle, the modal decomposition method is adopted to describe the bridge structure, and the time history of a collision load is used as the external load on the train-bridge system. A (180+216+180) m continuous steel trussed-arch bridge is considered as an illustrative case study. With the vessel collision acting on the pier, the displacements and accelerations at the pier-top and the mid-span of the bridge are calculated when a CRH2 high-speed train running through the bridge, and the influence of bridge vibration on the running safety indices of the train, including derailment factors, offload factors and lateral wheel/rail forces, are analyzed. The results demonstrate that under the vessel collision load, the dynamic responses of the bridge are greatly enlarged, threatening the running safety of high-speed train on the bridge, which is affected by both the collision intensity and the train speed.

• 한국분무공학회지
• /
• 제13권1호
• /
• pp.34-41
• /
• 2008

Molecular dynamic simulations have been carried out to study the effect of the nano-structure substrate and its temperature on cluster laminating. The interaction between substrate molecules and liquid molecules was modeled in the molecular scale and simulated by the molecular dynamics method in order to understand behaviors of the liquid cluster on nano-structure substrate. In the present model, the Lennard-Jones potential is applied to mono-atomic molecules of argon as liquid and platinum as nano-structure substrate to perform simulations of molecular dynamics. The effect of wettability on a substrate was investigated for the various beta of Lennard-Jones potential. The behavior of the liquid cluster and nano-structure substrate depends on interface wettability and function of molecules force, such as attraction and repulsion, in the collision progress. Furthermore, nano-structure substrate temperature and beta of Lennard-Jones potential have effect on the accumulation ratio. These results of simulation will be the foundation of coating application technology for micro fabrication manufacturing.