• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.409-414
• /
• 2017

두께가 얇은 스트립의 권취공정에서는 맨드렐과 함께 슬리브가 사용된다. 이때 스트립과 슬리브의 응력분포는 코일의 좌굴 및 슬리브의 두께 결정에 중요한 요인으로 작용한다. 하지만 스트립 권취 시 압력이 과도하게 누적됨에 따라 이를 실측하는 데에는 어려움이 있다. 이에 본 논문에서는 권취공정에 대한 유한요소모델을 수립하였다. 제안된 모델을 이용하여 슬리브의 반경, 원주방향 응력 및 스트립 층간 응력에 대해 분석하였다. 스트립 두께 변화에 따른 응력분포를 확인하였으며, 1 mm 스트립의 경우 권취 시작점에서 6.3배 큰 응력이 발생하였다. 맨드렐이 제공하는 반력에 의해 스트립 90 mm 적층 시 슬리브의 반경방향 응력이 선행이론대비 14.8 % 증가하였다.

• 한국재료학회지
• /
• 제22권8호
• /
• pp.403-408
• /
• 2012

A sample of ultra low carbon IF steel was processed by six-layer stack accumulative roll-bonding (ARB) and annealed. The ARB was conducted at ambient temperature after deforming the as-received material to a thickness of 0.5 mm by 50% cold rolling. The ARB was performed for a six-layer stacked, i.e. a 3 mm thick sheet, up to 3 cycles (an equivalent strain of ~7.0). In each ARB cycle, the stacked sheets were, first, deformed to 1.5 mm thickness by 50% rolling and then reduced to 0.5 mm thickness, as the starting thickness, by multi-pass rolling without lubrication. The specimen after 3 cycles was then annealed for 0.5 h at various temperatures ranging from 673 to 973 K. The microstructural evolution with the annealing temperature for the 3-cycle ARB processed IF steel was investigated in detail by transmission electron microscopy observation. The ARB processed IF steel exhibited mainly a dislocation cell lamella structure with relatively high dislocation density in which the subgrains were partially observed. The selected area diffraction (SAD) patterns suggested that the misorientation between neighboring cells or subgrains was very small. The thickness of the grains increased in a gradual way up to 873 K, but above 898 K it increased drastically. As a result, the grains came to have an equiaxed morphology at 898 K, in which the width and the thickness of the grains were almost identical. The grain growth occurred actively at temperatures above 923 K.

• 대기
• /
• 제21권1호
• /
• pp.109-121
• /
• 2011

This study revisits the definition of Changma, which is the major rainy season in Korea and corresponds to a regional component of the East Asian summer monsoon system. In spite of several decades of researches on Changma, questions still remain on many aspects of Changma that include its proper definition, determination of its onset and retreat, and relevant large-scale dynamical and thermodynamical features. Therefore, this study clarifies the definition of Changma (which is a starting point for the study of interannual and interdecadal variability) using a basic concept of air mass and front by calculating equivalent potential temperature (${\theta}_e$) that considers air temperature and humidity simultaneously. A negative peak in the meridional gradient of this quantity signifies the approximate location of Changma front. This front has previously been recognized as the boundary between the tropical North Pacific air mass and cold Okhotsk sea air mass. However, this study identifies three more important air masses affecting Changma: the tropical monsoon air mass related to the intertropical convergence zone over Southeast Asia and South China Sea, the tropical continental air mass over North China, and intermittently polar continental air mass. The variations of these five air masses lead to complicated evolution of Changma and modulate intensity, onset and withdrawal dates, and duration of Changma on the interannual time scale. Importantly, use of ${\theta}_e$, 500-hPa geopotential height and 200 hPa zonal wind fields for determining Changma onset and withdrawal dates results in a significant increase (up to~57%) in the hindcast skill compared to a previous study.

• 전기전자학회논문지
• /
• 제17권1호
• /
• pp.63-70
• /
• 2013

본 연구에서는 차량용 연료히터의 전기적 성능검사 챔버를 구현한다. 겨울철 저온환경의 영향을 받는 디젤 엔진이 냉각될 경우 일정한 온도 이하로 내려가면 파라핀과 같은 반고체 상태인 왁싱(Waxing)물질을 형성하여 엔진 시동이 잘 걸리지 않게 하는 원인이 된다. 히터내에 센서를 안착시켜 통합한 일체형 통합히터는 시동성 평가에 중요한 요소이며, 성능평가 시험 챔버 시스템을 통해 전기적인 특성을 시험한다. 최근 CRDI(커먼레일) 엔진을 주로 사용함에 따라 연료히터로 디젤오일을 가열하여 점화성능을 향상시키기 위한 연료히터 성능시험은 엔진의 시동성을 향상시키는 중요한 요소이다. 따라서 연료히터의 전기적 성능시험 검사항목은 상온, 극저온, 극고온에서 동작검사, 시험저항 설정에 따른 저항동작 지연시간 및 전류동작 지연시간, 온도변화에 따른 바이메탈 지연시간 검사, 블록히터의 전류 및 저항 검사, 히팅 운전검사 등을 수행하도록 설계한다.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.154-159
• /
• 2016

A roll-bonding process was applied to fabricate an AA1050/AZ91/AA1050 laminate complex sheet. Two AA1050 and one AZ91 magnesium sheets of 2 mm thickness, 30 mm width and 200 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 2 mm in thickness by conventional rolling. The rolling was performed at 623K without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 15.9 m/min. The AA1050/AZ91/AA1050 laminate complex sheet fabricated by roll bonding was then annealed at 373~573K for 0.5h. The microstructure of the complex sheets was revealed by electron back scatter diffraction (EBSD) measurement; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the complex sheet was found to increase by 11 % and the tensile elongation decreased by 7%, compared to those values of the starting material. In addition, the hardness of the AZ91 Mg region was slightly higher than those of the AA1050 regions. Both AA1050 and AZ91 showed a typical deformation structure in which the grains were elongated in the rolling direction; however, the mis-orientation distribution of grain boundaries varied greatly between the two materials.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.586-591
• /
• 2012

$Zr_2WP_2O_{12}$ powder, which has a negative thermal expansion coefficient, was synthesized by a solid-state reaction with $ZrO_2$, $WO_3$ and $NH_4H_2PO_4$ as the starting materials. The synthesis behavior was dependent on the solvent media used in the wet mixing process. The $Zr_2WP_2O_{12}$ powder prepared with a solvent consisting of D. I. water was fully crystallized at $1200^{\circ}C$, showing a sub-micron particle size. According to the results obtained from a thermal analysis, a $ZrP_2O_7$ was synthesized at a low temperature of $310^{\circ}C$, after which it was reacted with $WO_3$ at $1200^{\circ}C$. A new sintering additive, $Al(OH)_3$, was applied for the densification of the $Zr_2WP_2O_{12}$ powders. The cold isostatically pressed samples were densified with 1 wt% $Al(OH)_3$ additive or more at $1200^{\circ}C$ for 4 h. The main densification mechanism was liquid-phase sintering due to the liquid which resulted from the reaction with amorphous or unstable $Al_2O_3$ and $WO_3$. The densified $Zr_2WP_2O_{12}$ ceramics showed a relative density of 90% and a negative thermal expansion coefficient of $-3.4{\times}10^{-6}/^{\circ}C$. When using ${\alpha}-Al_2O_3$ as the sintering agent, densification was not observed at $1200^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.637-646
• /
• 2021

The free-piston Stirling engine (FPSE) has been widely used in aerospace owing to its advantages of high efficiency, high reliability, and self-starting ability. In this paper, a 20-kW FPSE is proposed by analyzing the requirements of space nuclear power reactor. A code was developed based on an improved simple analysis method to evaluate the performance of the proposed FPSE. The code is benchmarked with experimental data, and the maximum relative error of the output power is 17.1%. Numerical results show that the output power is 21 kW, which satisfies the design requirements. The results show that: a) reducing the pressure shell's thickness can improve the output power significantly; b) the system efficiency increases with the wire porosity, while the growth of system efficiency decreases when the porosity is higher than 80%, and system efficiency exhibits a linear relationship with the temperatures of the cold and hot sides; c) the system efficiency increases with the compression ratio; the compression ratio increases by 16.7% while the system efficiency increases by 42%. This study can provide valuable theoretical support for the design and analysis of FPSEs for space nuclear power reactors.

• Ocean and Polar Research
• /
• 제43권2호
• /
• pp.53-63
• /
• 2021

Changes in a marine environment have a broad socioeconomic implication on fisheries and their relevant industries so that there has been a growing demand for the medium-range (months to years) prediction of the marine environment Using a medium-range ocean prediction model (Ocean Mid-range prediction System, OMIDAS) for the northwest Pacific, this study attempted to assess seasonal difference in the mid-range predictability of the sea surface temperature (SST), focusing on the Korea seas characterized as a complex marine system. A three-month re-forecast experiment was conducted for each of the four seasons in 2016 starting from January, forced with Climate Forecast System version 2 (CFSv2) forecast data. The assessment using relative root-mean-square-error was taken for the last month SST of each experiment. Compared to the CFSv2, the OMIDAS revealed a better prediction skill for the Korea seas SST, particularly in the Yellow sea mainly due to a more realistic representation of the topography and current systems. Seasonally, the OMIDAS showed better predictability in the warm seasons (spring and summer) than in the cold seasons (fall and winter), suggesting seasonal dependency in predictability of the Korea seas. In addition, the mid-range predictability for the Korea seas significantly varies depending on regions: the predictability was higher in the East Sea than in the Yellow Sea. The improvement in the seasonal predictability for the Korea seas by OMIDAS highlights the importance of a regional ocean modeling system for a medium-range marine prediction.

• 원예과학기술지
• /
• 제29권1호
• /
• pp.1-9
• /
• 2011

본 연구는 한지형 마늘인 '의성마늘'을 이용하여 장일과 단일 조건에서 재배하여 마늘의 인경 분화 및 비대에 미치는 식물 생장 물질의 역할에 대해서 조사하였다. 한지형 마늘의 인경 분화기(4월 16)부터 인경 비대기(4월 24일, 5월 18일)에 엽신과 엽초내 식물내생호르몬 abscisic acid (ABA), jamonic acid(JA) 및 당 함량변화는 장일조건에서 ABA 함량이 단일조건에서 ABA 함량보다 높았고, 엽초내 ABA 함량이 엽신내 ABA 함량보다 높은 것으로 조사되었다. 마늘생육시기별 ABA 함량은 인편 분화기에서 인경 비대개시기까지는 큰 변화가 없다가 인경 비대개시기(5월 2일) 이후부터 인경이 비대 되는(5월 18일) 동안 그 함량이 현저히 증가하는 것으로 조사되었다. 반면 단일조건에서는 내생 JA 함량은 변화가 없었으나, 장일조건에서는 인편 분화기(4월 16일)부터 인경 비대개시기(5월 2일)까지 JA 함량은 증가되었다. 엽초내 JA 함량($30.19-53.19ng{\cdot}g^{-1}$ DW)은 엽신내 JA 함량($12.82-20.41ng{\cdot}g^{-1}$ DW)보다 높은 것으로 조사되어 엽초 내 JA 함량에 의해 마늘의 인경 비대가 유도되는 것으로 조사되었다. 장일 조건에서 엽신내 당 함량은 인편 분화기(4월 16일)부터 인경 비대개시기(5월 4일)까지 증가되었고, 인경 비대기(5월 4일에서 5월 8일) 동안 감소하였으나, 엽초내 당 함량은 인편 분화기(4월 16일)부터 인경 비대기(5월 18일)까지 서서히 증가되었다. 결론적으로 한지형 의성마늘 생장양상에 따라 엽초내 호르몬도 변화하는 경향을 보여 호르몬 변화가 마늘 생장과 밀접한 연관이 있음을 보여주었다.

• Strategy21
• /
• 통권39호
• /
• pp.140-162
• /
• 2016

The construction of Jeju Naval Base was finally completed and donated to the Republic of Korea Navy on February 26th this year. There is no doubt that the new base will contribute to the substantial augmentation of Korea's naval power and maritime security. However, we should note that the new naval base took a long and hard twenty-three years to be completed. In the 21st century, Korea should adopt a new strategy that can fulfill the security requirements of Korea for the new age of international relations. The 21st century is characterized by globalization, and in the world of globalization, a national boarder has become meaningless. In the late 20th century, after the Cold War, trade between countries have greatly increased and so did the importance of the seas. Having transformed from an agricultural country into a commercial country, Korea went from a continental state to a maritime state. Korea has become the 9th largest trading state, and obviously, the importance of the sea has become significant. Korea's national strategic focus needs to be on the sea for national survival. Thus, since the 1990s, the Korean Navy has planned to build the Jeju Naval Base. Jeju, due to its geopolitical characteristics, is extremely important to the 21st century Korea's economy and national security. Jeju is the starting point of the sea route that reaches out to the world, and at the same time, the ending point of the sea route that heads towards Korea. Jeju is located in the center of Northeast Asia and thus, Jeju Naval Base is extremely important for the area's security and order. Jeju Naval Base will be very useful not only for the maritime security of Korea, but also for keeping peace and order in Northeast Asia. Jeju Naval Base was the minimal effort against the six sea route security threats towards Korea. The six sea route threats are: 1) Threat from North Korea; 2) China's Threat towards Korea's sovereignty; 3) China's treat towards Korea's fishery; 4) Threat from Japan; 5) Threat towards Korea's sea routes; 6) Threat from recent phenomena of isolationism of the United States. Jeju Naval Base is built for both warships and civilian ships--such as cruise ships--to use. Just like the United States' Pearl Harbor, Jeju Naval Base will become not only the largest military base, but a beautiful tourist site.