Abstract
In the thin strip coiling process, it is necessary to use a sleeve with a mandrel to prevent excessive deformation of the strip. The stress distribution in the sleeve and strip is an important factor to determine the size of the sleeve. However, an experimental approach is almost impossible because of the accumulation of high pressure. A finite element (FE) model of the strip coiling process was developed in this study. Then, the radial and hoop stresses on the sleeve and strip were investigated using FE analyses. The theoretical values and analysis results under idealized conditions were compared to verify the FE model. The effect of the strip thickness on the stress distribution was also investigated. The radial stress increased by 6.3 times for a 1-mm-thick strip at the coil starting point. The radial stress at the sleeve increased by 14.8 % with a stacked thickness of 90 mm because of the reaction force applied by the mandrel.
두께가 얇은 스트립의 권취공정에서는 맨드렐과 함께 슬리브가 사용된다. 이때 스트립과 슬리브의 응력분포는 코일의 좌굴 및 슬리브의 두께 결정에 중요한 요인으로 작용한다. 하지만 스트립 권취 시 압력이 과도하게 누적됨에 따라 이를 실측하는 데에는 어려움이 있다. 이에 본 논문에서는 권취공정에 대한 유한요소모델을 수립하였다. 제안된 모델을 이용하여 슬리브의 반경, 원주방향 응력 및 스트립 층간 응력에 대해 분석하였다. 스트립 두께 변화에 따른 응력분포를 확인하였으며, 1 mm 스트립의 경우 권취 시작점에서 6.3배 큰 응력이 발생하였다. 맨드렐이 제공하는 반력에 의해 스트립 90 mm 적층 시 슬리브의 반경방향 응력이 선행이론대비 14.8 % 증가하였다.