• 제목/요약/키워드: Cold pressing

검색결과 140건 처리시간 0.029초

후방 가압식 피어싱 및 중공축 압축 공법에 의한 난성형 재료 중공장축의 단조 (Forging of Long Hollow Shafts of Hard-to-Form Material by Hollow Shaft Extrusion after Piercing with Back Pressing)

  • 전병윤;이진혁;엄재근;박정휘;전만수
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2007년도 추계학술대회 논문집
    • /
    • pp.338-343
    • /
    • 2007
  • We presented a special method of forging hollow shafts of hard-to-form material, which is composed of piercing with back pressing and hollow shaft extrusion. The presented method was applied to cold forging a bushing of an excavator. The finite element simulation technology was employed for developing the optimized process and the predictions were compared with the experiments. The method was also applied to an automotive part and was verified to be powerful for manufacturing the cold forged hollow shafts of the hard-to-form materials.

  • PDF

Flexible Thermoelectric Device Using Thick Films for Energy Harvesting from the Human Body

  • Cho, Han Ki;Kim, Da Hye;Sin, Hye Sun;Cho, Churl-Hee;Han, Seungwoo
    • 한국세라믹학회지
    • /
    • 제54권6호
    • /
    • pp.518-524
    • /
    • 2017
  • A flexible thermoelectric device using body heat has drawn attention as a power source for wearable devices. In this study, thermoelectric thick films were fabricated by cold pressing method using p-type antimony telluride and n-type bismuth telluride powders in accordance with specific loads. Thermoelectric thick films were denser and improved the electrical and thermoelectric properties while increasing the load of the cold pressing. The thickness of the specimen can be controlled by the amount of material; specimens were approximately 700 um in thickness. Flexible thermoelectric devices were manufactured by using the thermoelectric thick films on PI (Polyimide) substrate. The process is cheap, efficient, easy and scalable. Evaluation of power generation performance and flexibility on the fabricated flexible thermoelectric device was carried out. The flexible thermoelectric device has great flexibility and good performance and can be applied to wearable electronics as a power source.

Powder Metallurgical Tool Steel Solutions for Powder Pressing and Other High-performance Cold Work Applications

  • Schemmel, Ingrid;Marsoner, Stefan;Makovec, Heinz
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.841-843
    • /
    • 2006
  • In high-performance cold work applications, tool failure depends on the predominating loading conditions. Typical failure mechanisms are a combination of abrasive wear, adhesive wear, plastic deformation, cracking and edge crumbling. In this paper we demonstrate how the microstructure of tool steels can be positively influenced by modifying the alloying system and the production route to meet the demands of the different loading situations which occur during operation. The investigation was focused on ductility, fatigue strength and wear resistance. Theoretical considerations were confirmed by practical tests.

  • PDF

요소수지접착제(尿素樹脂接着劑)를 사용(使用)한 곰솔 집성재(集成材)의 제조조건(製造條件)이 접착성질(接着性質)에 미치는 영향(影響) (Influence of Adhesion Condition on the Laminated Wood of Pinus thunbergii glued with Urea-formaldhyde Resin)

  • 정인오;소원택;임기표
    • Journal of the Korean Wood Science and Technology
    • /
    • 제12권2호
    • /
    • pp.35-43
    • /
    • 1984
  • This study was carried out to investigate the block shear strength of the 2ply laminated wood composed of Pinus thunbergii with ureaformaldehyde resin as adhesives according to pressure (6, 9, 12, 15kg/$cm^2$), pressing time(5, 10, 20, 30 hrs.), amount of spread(54, 108, 217, 324g/$cm^2$), hardener(10, 20, 30, 40% of 10% $NH_4CL$ on resin) and extender(0, 5, 10, 15% wheat flour on resin), and the bending strength and bending young's modulus of laminated beam according to the number of ply. The results were summarized as follows; 1. According to pressing pressure with amount of spread 217g/$cm^2$ both dry and wet shear strength of laminated wood showed the highest in 15kg/$cm^2$, and hot-cold soaking treatment showed the highest in 9kg/$cm^2$, while all shear strength of dry, wet and hot-cold soaked laminated wood have been reduced with the increasing of pressing time. 2. According to amount of spread, adhesion strength with the dry, wet and hot-cold soaking treatments revealed the highest in 217g/$cm^2$ and have been reduced under or over 217g/$cm^2$ of spread. 3. According to addition of hardener and extender, all shear strength of laminated block with the dry, wet and hot-cold soaking treatments have been reduced in increasing of addition amount of hardener and extender. The bending strength of beam according to the number of ply showed the highest in 2ply laminated wood and horizontal loading beam to glue line had the higher in strength than the vertical loading.

  • PDF

금속분말의 냉간금형 압축 해석 (Analysis for Cold Die Compaction of Meteal Powder)

  • 권영삼;이희태;김기태
    • 대한기계학회논문집A
    • /
    • 제20권6호
    • /
    • pp.1893-1902
    • /
    • 1996
  • Densification behavior of 316L stainless steel power under die pressing was studied. The efects of friction between the powder and die wall under different die pressing modes were also investigated. The elastoplastic constitutive equations based on the yield functions of Fleck-Gurson and of Shima and Oyane were implemented into finite element program(ABAQUS) to simulate die compaction processes. The finite element results were compared with experimental data for 316L stainless steel powder under die pressing.

겨자 분말과 겨자유의 품질 향상을 위한 가공조건의 표준화 (Standardization of Processing Conditions of Mustard Powder and Mustard Oil for Quality Improvement)

  • 손무호;이주연
    • 한국조리학회지
    • /
    • 제12권4호
    • /
    • pp.131-139
    • /
    • 2006
  • 겨자 분말의 가공조건을 표준화하여 겨자 분말의 품질을 향상시키고 부산물로 얻어지는 겨자유를 재활용하고자 본 연구를 시도하였다. 겨자 분말과 겨자유의 매운맛 정도는 이에 함유되어 있는 매운맛 성분인 AITC 함량을 측정하여 비교하였다. 원두로부터 기름의 채유는 가능한 한 낮은 온도에서 행하는 것이 좋았으며, 원두에 전혀 열처리를 행하지 않은 $30^{\circ}C$에서 채유 할 때 겨자 분말에 잔류한 AITC 함량은 0.54%인데 비하여 $230^{\circ}$로 열처리 후 채유한 겨자 분말에서는 0.42%가 잔류하여 품질적인 차이를 나타내었다. 그러나 겨자유에 잔류한 AITC 함량은 동일한 처리온도 조건에서 각각 92 ppm, 139 ppm으로 반대의 경향을 나타내었다. 겨자 분말의 수분 함량은 4.5%일 때 가장 높은 0.54%의 AITC 함량을 나타내었고, 이러한 현상은 겨자 분말과 겨자유에 함유되어 있는 휘발성 기름 함량에서도 유사한 경향을 나타내었다. 따라서, 겨자원두에서 기름 성분의 채유는 낮은 온도에서 행하는 것이 겨자 분말 및 재활용을 위한 겨자의 품질을 동시에 고려할 때 가장 바람직한 것으로 나타났다.

  • PDF

기계적합금화한 (Al +12.5%Cu)3Zr 초미립 금속간화합물의 CIP 성형 및 소결 거동 (Cold Isostatic Pressing and Sintering Behavior of (Al +12.5%Cu)3Zr Nanocrystalline Intermetallic Compound Synthesized by Mechanical Alloying)

  • 문환균;홍경태;김선진
    • 한국재료학회지
    • /
    • 제12권8호
    • /
    • pp.634-640
    • /
    • 2002
  • To improve the ductility of mTEX>$(Al +12.5%Cu)<_3$Zr intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior, the effect of pressure and temperature on the $Ll_2$, phase formation and the behavior of the cold isostatic press and sintering were investigated. However mechanically alloyed A1$_3$Zr alloy have been known to have high mechanical strength even at high temperature, its workability was poor. A method of solution is refined grain size and phase transformation from $DO_{23}$ to $Ll_2$.$ Ll_2$ structure TEX>$(Al+12.5%Cu)<_3$Zr with nanocrystalline microstructure intermetallic powders where were prepared by mechanical alloying of elemental powders. Grain sizes of the as milled powders were less than 10nm (from transmission electron microscopy, TEM). Thermal analyses showed that $Ll_2$ structure was stable up to$ 800^{\circ}C$ for 1hour $(Al+ 12.5%Cu)<_3$Zr. $(Al+12.5%Cu)<_3$Zr has been consolidated by cold isostatic pressing (CIP 138, 207, 276, 414MPa) at room temperature and subsequent heat treatment at high temperatures where $Ll_2$ structure was stable under vacuum atmosphere. The results showed that 94.2% density of Ll$_2$ compacts was obtained for the (Al +12.5%Cu)$_3$Zr by sintering at 80$0^{\circ}C$ for 1hour (under CIPed 207MPa). This compact of the grain size was 40nm.

Groove Pressing 한 Aluminum 3003 판재의 집합조직 및 미세조직의 변화 (Texture and Microstructure in Aluminum 3003 Sheet During Groove Pressing)

  • 김훈동;허무영
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.176-179
    • /
    • 2001
  • A simple cold pressing procedure which allows shear deformations on sheet metals is proposed by designing dies with grooves and applied to aluminum 3003 sheets. shear deformation led to the formation of preferred orientation along <100>//RD, and the effect of initial tortures on the formation of shear textures was also studied Rectangular shaped dislocation cells formed in the deformed microstructure and boundaries of dislocation cells gradually rounded with the increased plastic strain. Upon subsequent annealing textures inherited deformation textures. Recrystallized grains consisted of a large number of fully recovered subgrains with well defined boundaries which persisted even after annealing at a higher temperature.

  • PDF

구름 베어링 부품의 소성가공 (Plastic Forming of Rolling Bearing Steel Components)

  • 송복한;박창남
    • 소성∙가공
    • /
    • 제12권2호
    • /
    • pp.83-87
    • /
    • 2003
  • Current state of plastic processes of steel bearing parts is surveyed. According to the advances in plastic forming technologies and their great advantage to mass production, plastic processes are adopted in manufacturing majority of bering parts. The rings are forged or ring rolled and the rolling elements, i.e, balls or rollers are cold formed before fine machining. Bearing's steel retainers are mainly press formed using cold rolled seel strips. Including the general explanation about above processes, some details of forging technology, control of forging temperature and after cooling process, and examples of computer simulation are described.

나노 구리 분말의 냉간정수압 공정에 대한 치밀화 거동 해석 (Analysis of Densification Behavior of Nano Cu Powders during Cold Isostatic Pressing)

  • 윤승채;김형섭;이창규
    • 한국분말재료학회지
    • /
    • 제11권4호
    • /
    • pp.341-347
    • /
    • 2004
  • In the study, a hybrid constitutive model for densification of metallic powders was applied to cold isostatic pressing. The model is based on a pressure-dependent plasticity model for porous materials combined with a dislocation density-based viscoplastic constitutive model considering microstructural features such as grain size and inter-particle spacing. Comparison of experiment and calculated results of microscale and nanoscale Cu powders was made. This theoretical approach is useful for powder densification analysis of various powder sizes, deformation routes and powder processing methods.