• Economic and Environmental Geology
• /
• v.37 no.6 s.169
• /
• pp.603-612
• /
• 2004

Pyrochlore is known as one of the most promising materials for the immobilization of radionuclide in high level waste. This study included the synthesis, phase relation and characteristics of $pyrochlore(CaCeZr_xTi_{2-x}O_{7,\;x=0.2\~2.0)$ in the system of Ca-Ce-Zr-Ti-O. Using the CPS(Cold pressing and sintering) method, the mixtures of $CaCO3_,\;CeO_2,\;ZrO_2\;and\;TiO_2$ oxides were pressed, and sintered at $1100\~1600^{\circ}C$ for 20 hours. The optimal synthetic conditions at various compositions were differed from 1300 to $1600^{\circ}C$ Even in the optimal temperatures, pyrochlore or fluorite coexisted with minor amount of perovskite, $CeO_2\;or\;Ce_{0.75}Zr_{0.25}O_2$. It was confirmed that pyrochlore and fluorite structures were stable at $x\leq0.6\;and\;x\geq1.0$, respectively. Especially, the compositions of pyrochlore or fluorite showed non-stoichiometric compositions in that contents of Ca and Ti were more deficient and those of Zr and Ce were more excess than batch compositions with the increase of x value. These characteristics stemmed from the behavior of elements occupied at eight- and six-coordinated site, and then caused the coexistence of perovskite, $CeO_2\;or\;Ce_{0.75}Zr_{0.25}O_2$ along with pyrochlore or fluorite.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.479-486
• /
• 2017

Steel beams with corrugated web have been widely used in the steel structures. However, it is challenging to weld the section between the corrugated web and the flange straight, which increases the cost of production. In order to solve this issue, steel beam with intaglio and embossed web (It is called an IEB) was invented. A web with embossment is produced by cold pressing and welded to flange by automatic welding machine. The loading tests were conducted to investigate the load-carrying capacity of IEB, and its test result was compared with that of H-shaped beam having a same size of flange and web. The test results of IEB series showed about 40% higher load capacities than H-shaped series. As a result of comparing the IEB specimen with Eurocodes for steel beams with corrugated web, all of specimens tested in this study did not meet the design value. Therefore, it is difficult to apply existing formula to IEB and new design formula should be presented for field application.

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.176-183
• /
• 2020

The high-temperature stability of YSZ specimens fabricated by die pressure and cold isostatic press (CIP) is investigated in CaCl₂-CaF₂-CaO molten salt at 1,150 ℃. The experimental results are as follows: green density 46.7 % and 50.9 %; sintering density 93.3 % and 99.3 % for die press and CIP, respectively. YSZ foremd by CIP exhibits higher stability than YSZ formed by die press due to denseness dependency after high-temperature stability test. YSZ shows peaks mainly attributed to CaZrO₃, with a small t-ZrO₂ peak, unlike the high-intensity tetragonal-ZrO₂ (t-ZrO₂) peak observed for the asreceived specimen. The t-ZrO₂ phase of YSZ is likely stabilized by Y₂O₃, and the leaching of Y₂O₃ results in phase transformation from t-ZrO₂ to m-ZrO₂. CaZrO₃ likely forms from the reaction between CaO and m-ZrO₂. As the exposure time increases, more CaZrO₃ is observed in the internal region of YSZ, which could be attributed to the inward diffusion of molten salt and outward diffusion of the stabilizer (Y₂O₃) through the pores. This results in greater susceptibility to phase transformation and CaZrO₃ formation. To use SOM anodes for the electroreduction of various metals, YSZ stability must be improved by adjusting the high-density in the forming process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.42-49
• /
• 1988

In order to utilize sea mustard, Undaria pinnatifida, effectively. sea mustard jam was prepared by use of physical properties of polysaccharides, mainly alginic acid and then its chemical composition, nutritive qualifies and the stability of pigments were examined. Suitable processing condition for sea mustard jam was as fellows : as the first stage, fresh sea mustard was scalded for 20 sec at $85^{\circ}C$ and dried sea mustard was dipped for 20 min in cold water for rehydration, then both sea mustards were treated by draining and chopping. Next, after adding 4 fold of $0.5\%\;K_2HPO_4$ solution to weight of chopped sea mustards, the mixed solutions were agitated for 15 min at $95^{\circ}C$, and gelated sea mustards were filterated by pressing. Flow characteristics of those sea mustard jam were regarded mixed type having pseudoplastic type and yield stress. Judging from sensory evaluation, adding $0.375\%$ of saccharin, $2\%$ of sorbitol, $0.25\%$ of citric acid and $0.5\%$ of powder of roasted soybean to sea mustard jam were suitable for enhancing taste and flavor of product. Chemical composition of products were scarcely changed throughtout processing. Jam processed by fresh sea mustard was better than dried one in contents of chlorophyll and total carotenoid pigments. In fatty acid composition, polyenoic acids of $C_{18:3},\;C_{20:4},\;C_{20:5},\;C_{22:6}$ were held high contents as known to have lowering function of cholesterol contents. It was presumed that dominant contents in free amino acids such as lysine, alanine, glutamic acid and organic acids such as citric acid, oxalic acid, $\alpha-ketoglutaric$ acid, lactic acid and succinic acid held important role for the flavor of sea mustard jam.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1178-1183
• /
• 1999

Essential oils were isolated from the peel of mandarin (Citrus unshiu Marc. Var. Okitsu) cultivated in Cheju Island. Among three different isolation methods investigated, simultaneous distillation gave higher yield 1.14%(w/w) than solvent extraction or cold pressing. The densities of essential oils were between 0.8409 and 0.8530, which showed no significant effect of the isolation methods. Some variations in the number of constituents detected and the content of d-limonene in the peel oils were observed depending upon the isolation methods. The citrus fruit was collected seasonally from the field and used as a sample for analysis. The peel thickness and the peel content of citrus fruit were around 2 mm and about 17% on wet weight basis, respectively, in harvest season. The maximum yield of essential oils was obtained in September from citrus peels just prior to ripeness and thereafter the yield had a tendency of decrease but remained over 1%(w/w). The relative content of d-limonene, the major constituent of citrus peel oils. increased gradually with ripening up to 68.69%(relative peak area, RPA). The other minor constituents were ${\gamma}-terpinene,\;{\beta}-elemene$, farnesene, hexadecanoic acid, ${\alpha}-pinene,\; {\beta}-myrcene$ and linalool in the decreasing order of their own contents of 7.75, 2.96, 2.29, 1.76, 1.63, 1.56 and 1.46%(RPA).

• The Journal of Internal Korean Medicine
• /
• v.10 no.1
• /
• pp.65-80
• /
• 1989

About Oui-Ga-Sil(胃家實) in order to considerate the contents recorded in Nai-Gyung Sang-Han-Lon and latter literature, definition, etiopathology, syndrome, differential diagnosis, therapy, Prognosis and prevention were classified. And the results were as follows: 1. Oui-Ga(胃家)was a term which indicated the whole digestive system such as stomach, small intestine, large intestine, rectum and anus. Sil(實)could be defined as the peculiar concept pertaining to the acute and last stage which was invaded to inside bowels because of abundance with evil influence. 2. Eliology of Oui-Ga-Sil was abunt gastric fever originally, injured mucus because of mistreatment, the invasion to inside of outside evil influence through meridian. Pathology was the opening and shutting appearance of gastric abundance with intestinal emptiness, and intestinal abundance with gastric emptiness, Oui-Ga-Sil could be occurred because of gastric abundant dryness and splenic humidifying capacity decrease. 3. Symptom of Oui-Ga-Sil was classified as for the sunlight outside syndrome and the inside abundant syndrome. The sunlight outside syndrome was body fever, sweating, no chilling, on the contrary hatred of fever. The chief complaint of inside abundant syndrome was daily fever, talking in delirium, hand and foot sweating, abdominal distention, difficult defection and those could be pertained to sunlight bowel syndrome. 4. Diagnostic views of Oui-Ga-Sil were that pulse was descending abundant large strong and smooth quick, a coated tongue was yellow, deep yellow, old yellow, thick, scorching dry rough or gray black. On abdominal diagnosis, pressing by hand, patient was conscious of pain, excessive pain, rejection against press, impossible press or intermittent abdominal pain and bowel cutting pain without press. 5. Differential diagnosis was that the sunlight of Nai-Gyung-Fever-Theory was outside desease making meridian the prime object, Baik-Ho-Tang syndrome was making figureless abundant fever the pivotal point. And important differential standard of splenic shrink syndrome was that a daily fever, an irritation with fever were not occurred. 6. Theory of Oui-Ga-Sil was that Seng-Gi-Tang classes had been used in attacking downward or making balance, and moxibustion on Jung-Wan, honey boiling induction theory had been also used. Attacking downward therapy was invigorating method to preserve mucus, and if mucus had been exausted with complicating emptiness prognosis had been appeared badly. 7. Preventing from Oui-Ga-Sil diet by rule, fitness to cold and warmth may be needed to prevent outside evil influence attack and inside evil influence occurrence. Prudence with being very busy, fatigue, wine and woman may be also needed not to be an injury to splanic and gastric spirit.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.886-893
• /
• 2001

We synthesized $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ powders by coprecipitation, citration and solid-state reactions. The oxygen permeation membranes were fabricated by cold isostatic pressing of the synthesized powders, followed by sintering in air. All powders and membranes consist of perovskite phases. The coprecipitated powders showed the highest surface area ($7.5m^2/g$) but strontium deficiency was found during washing and filtering in the process. The membrane with lower relative density was fabricated by citration method. On the other hand, solid state reacted powders had high relative density (95%), and mechanical properties showed superior properties. Especially, the composition of the solid-state reacted powders was relatively well-controlled.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.622-629
• /
• 2017

This study was carried out to investigate the effects of cold maceration and heat treatment prior to alcohol fermentation on the quality characteristics of wine made from Okrang grape cultivar. The results of this study show that alcohol contents of wines increased as fermentation period increased, whereas $^{\circ}Brix$ values decreased. The pH levels of wines ranged from 3.17 to 3.42 while the total acidities of wines ranged from 0.49~0.99%. The free sugar contents of wines tended to decrease as fermentation period increased. In particular, free sugar content of wine pre-treated at low temperature prior to alcohol fermentation slowly. Total polyphenol content of wine heat-treated prior to alcohol fermentation was higher than those of other wines and reached a maximum value after fermentation for 2 days. Campbell Early wine showed the strongest antioxidant effect, measured based on DPPH free radical scavenging activity, followed by Okrang wine pressing after fermentation. These results indicate that pre-treatment before wine fermentation greatly affects wine quality and biofunctional activities.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.283-294
• /
• 2020

In this study, in order to increase the utilization of Citrus junos seeds, which account for 13% of the weight ratio of Citrus junos ripened fruit, but are mostly discarded and not utilized, the efficacy of skin beauty of Citrus junos seed oil extracted by cold pressing was studied. Citrus junos seed oil was found to contain approximately 74% of unsaturated fatty acids consisting mainly of oleic acid and linoleic acid, and limonene, which is mainly contained in Citrus junos peel, contained a very low content of about 0.0187%. As a result of evaluating the DPPH radical scavenging activity of Citrus junos seed oil, 26% of DPPH radical scavenging ability was confirmed at 5% concentration of Citrus junos seed oil. To confirm the anti-inflammatory effect, as a result of testing RAW 264.7 cytotoxicity test and NO production for Citrus junos seed oil, NO production was suppressed by 53% at a concentration of 0.05% that does not show cytotoxicity. In addition, in the RBL-2H3 cytotoxicity and β-hexosaminidase release inhibitory efficacy test for anti-allergic efficacy confirmation, it was confirmed that β-hexosaminidas release was suppressed by 26% at a concentration of 0.05% that did not show cytotoxicity. Lastly, in the human skin application test result of O/W emulsion containing 5% of Citrus junos seed oil, it showed higher skin moisturizing effect than the control emulsion containing the same amount of caprylic/capric triglyceride. Therefore, it is thought that Citrus junos seed oil might be used as a excellent skin care material.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.