• Journal of Physiology & Pathology in Korean Medicine
• /
• v.35 no.2
• /
• pp.47-55
• /
• 2021

In order to ensure the fact that eight principle pattern differentiation is used clinically as a basic guideline for Korean medicine practice, the definition, role and method of yin-yang pattern differentiation with its case report were explored at first. Yinyang Pattern Differentiation is a method of discriminating human tendencies or morbidity based on the yin and yang characteristics expressed in living bodies. And yin and yang are the two contrasting characteristics and aspects of the interaction when certain physical conditions that have a lasting effect on the human physiological metabolic function are correlated with the morbidity. Specific methods of yinyang pattern differentiation can be divided into several types of yin and yang indicators. First, time and space factors like day and night, hot and cold seasons, above and below, topographical districts. Second, colors and pulse and their/or relative clearness and muddiness, hardness and softness, moving and resting. Third, diagnose yin and yang patterns through distinguishing the true and false of a fever and cold in an emergency phase such as increase of brain pressure and shock state. Fourth, general characteristics of the propensity and constitution of a subject such as body type, speech, behavior, and physiological metabolism. And for clinical use, these were summarized again as a symptom indicators of physical signs and color, pulse, tongue and questionnaire indicators of propensity, body type, and space-time characteristics. Conclusively, it was confirmed that yinyang pattern differentiation has its own diagnostic significance which is distinct from exterior-interior, cold-heat and deficiency-excess pattern differentiation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.32-37
• /
• 2001

This article is to provide reasonably accurate vehicle emission estimates for the four sampled fuels which are commercially available across the nation. Emission quantities are obtained by testing a vehicle on a chassis dynamometer and capturing a sample of the emissions from the tailpipe in vehicle. The vehicle is driven following a particular pattern of idle, acceleration, cruise, and deceleration. Shown here is the trace of the test cycle known as the CVS-75 Mode which is used to certify the emission performance standards. The mode of CVS-75 consists of a cold start cycle, a hot stabilized cycle, and a hot start cycle. Emissions for the pollutants are measured in vehicle testing. These are carbon monoxide (CO), oxides of nitrogen (NOx), and total hydrocarbon (THC). The test results summarized in this report indicate that the differences for the amount of emission are quantitatively minimal.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.205-208
• /
• 2016

In this paper, different types of touch screen silver pastes for bonding in conductive pattern formed over the ito film by bonding each sample of 5 was dried. The dry conditions, the oxidation of the ito film is a condition that does not occur. Reliability testing constant temp and humidity, cold-hot impact test is in progress. Each test will check the status of five sheets conductive pattern bonding. Conductive pattern bonding, after each 240,480,615 hours to check the status of silver pattern bonding. Reliability testing these through different silver pastes can see that the change in the adhesion and conductivity deterioration of the quality can be prevented, and reliability testing low temperature curing from the surface of silver pastes that can come as soon as the discoloration was unknown.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.541-550
• /
• 1988

Natural convection in a square enclosure was investigated numerically for low prandtl number fluids using Finite Element Method. In case of Ra=10$^{4}$, 10$^{5}$ and 10$^{6}$ the temperature gradient decreases gradually at the lower end of the hot wall(or at the upper end of the cold wall) as prandtl number decreases in the range of 0.01 .leq. Pr .leq. 10. Maximum heat transfer occurs at a somewhat higher point from the lower end of hot wall(or at somewhat lower point from the upper end of the cold wall) and it draws near to the lower end of the hot wall(or draws near to the upper end of the cold wall) with increasing prandtl number. The flow in the enclosure appears as an Unicell Pattern for Ra .leq. 10$^{4}$ and secondarily flows(or tertiary flows) appears in the core region for Ra .geq. 10$^{5}$ . The line joining the center of secondary cells skewes in a clockwise direction as the Prandtl number decreases.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.4
• /
• pp.53-65
• /
• 2020

This study aimed to provide a basic information for managing the water quality of national and regional 1st rivers in Gyeongnam by analyzing the emerging hot spot patterns in BOD, T-P, and TOC, and by grouping the changing trends into clusters. The emerging hot spot analysis for each water quality item was implemented in ArcGIS Desktop with monthly water quality data from 96 water environmental monitoring stations in Gyeongnam, and then four patterns of water quality change were classified by the K-mean cluster analysis. As for BOD, persistent cold spot pattern covered about 42.9% of target rivers, and T-P concentration tended to be low or be getting lower at over 70% of target rivers. While, for TOC, about 70% of target rivers resulted in oscillating hot spots. In addition, the cluster analysis showed that the downstream of Nakdong river had the top priority in terms of water quality management because of the increasing concentration for all the three water quality.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.12
• /
• pp.915-923
• /
• 2008

The performance experiments for a microchannel printed circuit heat exchanger (PCHE) of high-performance and high-efficiency on the two technologies of micro photo-etching and diffusion bonding were performed in this study. The microchannel PCHE were experimentally investigated for Reynolds number in ranges of 100 $\sim$ 700 under various flow conditions in the hot side and the cold side. The inlet temperatures of the hot side were conducted in range of $40^{\circ}C\;{\sim}\;50^{\circ}C$ while that of the cold-side were fixed at $20^{\circ}C$. In the flow pattern, the counter flow was provided 6.8% and 10 $\sim$ 15% higher average heat transfer rate and heat transfer performance than the parallel flow, respectively. The average heat transfer rate, heat transfer performance and pressure drop increases with increasing Reynolds number in all the experiment. The increasing of inlet temperature in the experiment range has not an effect on the heat transfer performance while the pressure drop decrease slightly with that of inlet temperature. The experimental correlations to the heat transfer coefficient and pressure drop factor as a function of the Reynolds number have been suggested for the microchannel PCHE.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.1
• /
• pp.23-33
• /
• 1987

To detect lepotospiral strains which produce hemolysin and determine the optimal condition for assaying hemolysin, we screened reference strains and observed some property of hemolysin. Hemolysin activity was assayed with cell free culture liquids and erythrocyte suspension. The production of hemolysin by local strains isolated in Korea was assayed and compared with that of reference strains. The hemolysin was produced by 18 strains among 38 reference strains and 3 local strains isolated in Korea. The production of hemolysin began with growth of Leptospira cultured in EMJH medium and reached maximum at stationary phase. The optimum temperature for hemolytic activity was $37^{\circ}C$. At lower temperature the activity of hemolysin was decreased progressively. The hemolytic activity was completely inactivated after :30 minutes' exposure at $56^{\circ}C$. Hemolysis pattern was "hot-cold type" which showed increased hemolysis after cold incubation. The hemolysin was most active on sheep erythrocyte and less active on ox, goat, human and guinea pig erythrocyte with the decreasing order.

• Transactions of Materials Processing
• /
• v.5 no.3
• /
• pp.239-255
• /
• 1996

A new forming technology has been developed to fabricate near-net shape products using light metal. A semi-solid forming technology has some advantages compared with the conventional forming processes such as die casting squeeze casting and hot/cold forging. In this study the numerical analysis of semi-solid filling for a straight die shape and orifice die shape in gate pattern is studied on semi-solid materials(SSM) of solid fraction fs =30% in A356 aluminum alloy. The finite difference program of Navier-Stokes equation coupled with heat transfer and solidification has been developed to predict a filling pattern and the temperature distribution of SSM. The programdeveloped in this study gives die filling patterns of SSM and final solidifica-tion region.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.202-209
• /
• 2017

A cold-work tool steel powder is used to fabricate 3-dimensional objects by selective laser melting using a high-pressure gas atomization process. The spherical powder particles form continuous carbide networks among the austenite matrix and its decomposition products. The carbides comprise Nb-rich MC and Mo-rich $M_2C$. In the SLM process, the process parameters such as the laser power (90 W), layer thickness ($25{\mu}m$), and hatch spacing ($80{\mu}m$) are kept fixed, while the scan speed is changed from 50 mm/s to 4000 mm/s. At a low scan speed of 50 mm/s, spherical cavities develop due to over melting, while they are substantially reduced on increasing the speed to 2000 mm/s. The carbide network spacing decreases with increasing speed. At an excessively high speed of 4000 mm/s, long and irregularly shaped cavities are developed due to incomplete melting. The influence of the scan pattern is examined, for which $1{\times}1 mm^2$ blocks constituting a processing layer are irradiated in a random sequence. This island-type pattern exhibits the same effect as that of a low scan speed. Post processing of an object using hot isostatic pressing leads to a great reduction in the porosity but causes coarsening of the microstructure.

• Journal of Korean Medical classics
• /
• v.34 no.1
• /
• pp.47-65
• /
• 2021

Objectives : An accurate judgment of prognosis when treating diseases is crucial. While the 『Shanghanlun(傷寒論)』 deals with the prognosis of the Three Yin Diseases with great importance, full-scale studies have been lacking. This paper aims to study the Three Yin Diseases with a focus on prognosis analysis. Methods : Among the Three Yin Disease verses, those that could provide clues to prognosis were selected and analysed. Conclusions & Results : When Yang pulse patterns such as long(長脈)·floating(浮脈)·rapid(數脈) pulses and Yang symptoms such as fever, vexing heat, mild perspiration, thirst, warmth in hands and feet are present in Yin disease, it could be taken as signs of Yang Qi restoration. In these situations, Yin Cold pattern such as diarrhea and reversal cold disappear and the prognosis is positive. However, despite Yang pulse patterns and symptoms, there are cases where diarrhea happens as a result of cold dampness being eliminated due to Yang Qi restoration. Also, when Yang Qi starts communicating smoothly after its restoration in the Three Yin Diseases, perspiration can happen. When diarrhea and reversal cold, which are patterns of Yin Cold get worse, with pulse patterns such as unfelt(脈不至)·replete(實脈)·fulminating(脈暴出) pulses, false heat symptoms such as fever and hot flashes happen, accompanied with Yang Qi depleted symptoms such as inability to lie down due to agitation, continuous perspiration, sore throat, dyspnea, and exaggerated breathing happen. When fast pulse, fever, and perspiration are present due to depression and stagnation of ministerial fire, symptoms such as bloody stool with pus, purulent abscess, sore throat, and inability to lie down due to agitation show, which signal negative prognosis. In bad cases of Reverting Yin Disease, there is continuous diarrhea and bloody stool with pus, which can be due to either Kidney Yang deficiency or depression and stagnation of ministerial fire. It could also be caused by excessive heat.