• 제목/요약/키워드: Coil tube

검색결과 156건 처리시간 0.022초

역전 유동층 내의 유동해석 및 슬러리아이스 생성에 관한 연구 (Flow Analysis and an Experimental Study on Formation of Slurry Ice in the Reversing Flow Layer)

  • 오철;최영규
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권4호
    • /
    • pp.421-428
    • /
    • 2011
  • 최근 지구 온난화와 더불어 급격한 기후 변화 등으로 여름철 주간 냉방 수요가 급격히 증가하여 이에 따른 전력 수요량이 증가하고 있다. 또한 주간 전력 피크로 인한 급격한 전력부하 상승은 전력 수급의 불균형을 가져 와 사회적 문제로 대두되고 있다. 이를 위해 개발된 축냉시스템은 전력사용량이 상대적으로 적은 심야시간에 냉열을 만들어 탱크에 저장해 두었다가 그것을 주간 냉방 전력 사용 피크시간에 이용함으로써, 냉동기의 용량이 작아지고 냉동기를 고효율로 운전할 수 있으며, 갑작스런 부하 증가에 적절히 대응할 수 있는 등 여러 가지 장점을 갖고 있다. 이로 인하여 주간전력 피크를 줄여주는 효과를 가진다. 축냉시스템 중 하나인 슬러리아이스형은 슬러리아이스가 과냉되지 않은 작은 입자형태를 갖고 있어 해빙특성이 뛰어나므로 부하변동에 빠르게 반응할 수 있으며, 그 저장과 재생 및 수송 분야에서 그 장점과 기능이 입증되었다. 본 실험에서는 슬러리아이스 생성 효율을 높이기 위하여 역전유동층을 이용하였다. 이러한 역전유동층은 냉각관 표면에 얼음 부착이 심화되기 전에 얼음 입자를 분리시켜 수 내지 수십 미크론 단위(0.1~0.001 mm)의 슬러리아이스를 생성하도록 하였다.

SG Tube 축방향 노치 균열의 정량적 EC 신호평가 (Quantitative EC Signal Analysis on the Axial Notch Cracks of the SG Tubes)

  • 민경만;박중암;신기석;김인철
    • 비파괴검사학회지
    • /
    • 제29권4호
    • /
    • pp.374-382
    • /
    • 2009
  • 원자력발전소의 1차측 및 2차측 냉각계의 장벽 역할을 하는 핵심 설비중 하나인 증기발생기(steam generator, SG) 전열관은 공공의 사회적 안전성과 효율적인 발전 용량을 유지하기 위해 구조적 건전성을 유지하여야 한다. 또한 결함을 함유하고 있는 전열관은 해당결함을 조기에 검출, 정량적으로 결함을 평가하여 필요한 경우에는 보수조치를 수행하여야 한다. 이러한 결함의 검출 및 정량화를 위해서 검사관련 고시 및 강화된 SG 관리프로그램(SGMP)에 근거하여 와전류탐상검사법(eddy current testing, ECT)을 적용, 검사를 수행하고 있다. SG 전열관에서 검출되고 있는 결함중 응력부식균열(stress corrosion cracking, SCC)은 미세한 경우 결함의 검출이 어려울 뿐 아니라 생성된 결함의 성장속도가 빠르기 때문에 SG 전열관의 건전성을 위협하는 주요결함 기구중 하나로 분류하고 있다. 본 논문에서는 다양한 결함 깊이 및 길이별로 방전가공(electric discharge machining, EDM)된 축방향 ODSCC에 대해 pancake, +point 및 shielded pancake 코일 등이 탑재된 3 coil형태의 +PT MRPC(motorized rotating pancake coils)를 적용하여 결함의 검출가능 여부 및 크기 측정을 위한 검사를 수행하였으며 본 실험결과를 통해 SG 전열관의 건전성 및 원전 운전의 안전성을 진단하는 공학적 평가 자료로써의 활용 가능성 뿐 아니라 와전류탐상검사의 신뢰도 향상을 도모하고자 하였다.

Relationship Between the Dose of Clodronate and Serum Level of Alkaline Phosphatase, Calcium, and Phosphate During Orthodontic Tooth Movement

  • Choi, Josefina;Baek, Seung-Hak;Chang, Young-Il
    • Journal of Korean Dental Science
    • /
    • 제3권1호
    • /
    • pp.32-38
    • /
    • 2010
  • Objective : To evaluate the relationship between the dose of Clodronate and serum level of alkaline phosphatase (ALP), calcium (Ca), and phosphate (PO4) during orthodontic tooth movement MaterialS and MethodS: A total of 18 sex-matched Wistar rats (weight=180~230g, mean age=8 weeks) were allocated into the 2.5mM Clodronate (2.5C) group, 10mM Clodronate (10C) group, or control group (n=6 for each group). After the application of a nickel-titanium closed coil spring (force of 60g) between the upper central incisors and first molars (UFM), 2.5C, 10C, or saline was injected every third day into the subperiosteum of the alveolar bone adjacent to UFM for the experimental and control groups. The animals were sacrificed 17 days later. Trunk blood was quickly collected into a heparinized tube and centrifuged at 2,000 rpm for 20 min. The plasma was used for the biochemical assays of the serum level of ALP, Ca, and PO4. Kruskall-Wallis test and Mann-Whitney test with Bonferroni correction were performed for the statistical analyses. Results : Dose-dependent increase in the level of ALP (P<0.01) and decrease in the level of Ca (P<0.001) were observed among the control, 2.5C, and 10C groups. Although there was no significant difference in PO4 between the 2.5C and 10C groups, the 10C group showed a significantly higher level of PO4 than the control group (P<0.01). Conclusion : Since Clodronate induced significant dose-dependent change in the serum level of ALP, Ca, and PO4 during orthodontic tooth movement, orthodontists should consider these biochemical markers not only as a diagnostic tool for bone turnover rate but also as a monitoring tool for orthodontic tooth movement.

  • PDF

착상조건에서 연속난방이 가능한 히트펌프 성능 향상 기술 (Performance Improvement Technology on a Continuous Heating Heat Pump at Frost Condition)

  • 전창덕
    • 한국산학기술학회논문지
    • /
    • 제14권2호
    • /
    • pp.573-577
    • /
    • 2013
  • 히트펌프는 에너지 효율이 높고, 지열, 폐열, 공기열 등 다양한 열원 사용이 가능하기 때문에 보급이 빠르게 확대되고 있다. 공기를 열원으로 이용하는 공랭식 히트펌프의 경우는 실외기 표면에 형성되는 서리를 제거하기 위해 제상운전이 요구된다. 일반적으로 사용하는 역사이클(reverse cycle) 제상운전 방법은 연속난방이 불가능하며 이로 인해 성능계수가 감소하는 원인이 된다. 본 연구에서는 실외기 코일용 휜-관 열교환기를 3열로 구성하고 난방과 제상이동시에 가능하도록 일정시간 간격으로 열교환기의 한 개의 열을 응축기로, 나머지 열은 증발기로 교번 운전을 수행하여 KS C 9306에 규정된 제상-난방 시험조건(건구온도 $2^{\circ}C$, 습구온도 $1^{\circ}C$)에서 최소 180분 이상 연속난방이 가능함을 실증하였으며 역사이클 제상방법을 사용하는 일반적인 히트펌프 대비 COP가 약 20% 향상됨을 알 수 있었다.

2,4,6-Trinitrotoluene (TNT)의 광분해 특성 (Photo-decomposition Characteristics of 2,4,6-Trinitrotoluene in a UV/$H_2O_2$ Process)

  • 권범근;최원용;윤제용
    • 상하수도학회지
    • /
    • 제24권6호
    • /
    • pp.775-788
    • /
    • 2010
  • The decomposition of 2,4,6-trinitrotoluene (TNT) and the mass balance of nitrogen (N) species as products were investigated in a UV/H2O2system by varying pH, concentrations of $H_2O_2$, and $O_2$. All experiments were conducted in a semi-batch system employing a 50 mL reaction vessel and a coil-type quartz-tube reactor. In contrast with previous studies employing batch mode, TNT decomposition in the semi-batch mode was proportionally enhanced by increasing $H_2O_2$ concentration to 10 mM (0.034%), indicatingthat an inhibitory effect of excess $H_2O_2$on hydroxyl radical (${\cdot}OH$) can be negligible. N compounds are released as $NO_2^-$ in the early stages of the reaction, but $NO_2^-$ is rapidly oxidized to $NO_3^-$ by means of ${\cdot}OH$. $NH_4^+$ was also detected in this study and showed gradually the increase with increasing reaction time. In this study, $NH_4^+$ production can involve the reduction of nitro group of TNT concurrent with the production of $NO_3^-$. Of the N species originating from TNT decomposition, 12 ~ 72% were inorganic forms (i.e. [$NO_3^-$] + [$NO_2^-$] + [$NH_4^+$]). This result suggests that the large remaining N portions indicate that unidentified N compounds can exist.

실험적 치아 이동시 성견 치주조직의 변화에 대한 면역조직화학적 연구 (IMMUNOHISTOCHEMICAL STUDY ON THE PERIODONTAL TISSUE REACTION DURING EXPERIMENTAL TOOTH MOVEMENT IN THE ADULT DOG)

  • 김미정;양원식
    • 대한치과교정학회지
    • /
    • 제23권1호
    • /
    • pp.89-100
    • /
    • 1993
  • The purpose of this study was to evaluate the effect of orthodontic force on periodontal cellular activity by immunoperoxidase stain of epidermal growth factor, one of the tissue hormone. And supplementarily, to investigate of the changes of periodontal structures, periodontium was stained by H-E, Masson's Trichrome, P. A. S. stain after orthodontic force application. The experimental animals were four young adult dogs of average 8 month old. The fixed orthodontic appliance was cemented on mandibular right 4th premolar and 1st molar of each animal as experimental site. Mandibular left 4th premolar area of the same animal was used as control. The appliance consist of two silver crown soldered with 0.030' tube, $0.018\times0.022'$ S.S. sectional arch wire, and 0.009' open coil spring for manifestating of orthodontic force for bodily tooth movement of mandibular 4th premolar toward mesial direction. Experimental group was sacrificed at 1, 2, 3, 5 weeks from beginning of the experiment, and was investigated immunohistochemically and bistochemically by several staining methods. Findings were as follows: 1. The degree of EGF staining in control group was highest in epithelium of periodontium, and osteoclasts, osteoblasts and fibroblasts around the capillary were stained at higher level in periodontium. Generally, control group shows positive distribution of EGF all around the periodontal area. 2. The degree of EGF staining in control and 5 week group were similar, and did not show the significant different level between tension and pressure side. 3. All of 1, 2, 3 week group showed the same staining degree and distribution of EGF, and the tension side was more positive reaction of EGF stain than the pressure side. 4. The features of collagen fiber and periodontal fiber arrangement observed by H-E, Masson's Trichrome and P. A. S. stain revealed that oblique periodontal fibers were strectched in tension side, compressed in pressure side of all experimental group. Some fiber group in pressure side of 5 week group recovered the regular arrangement along the capillaries.

  • PDF

원자방출 분광분석을 위한 수평형 유도결합 플라스마의 개발과 납 검출한계 비교 (Development of an Axially Viewed Inductively Coupled Plasma for Atomic Emission Spectrometry and Comparison between the Detection Limits of Lead)

  • 조성일;한명섭;이상화;이종해;우진춘
    • 대한화학회지
    • /
    • 제41권6호
    • /
    • pp.292-298
    • /
    • 1997
  • 유도코일을 5회 감고, 외측 석영관 길이를 일반적인 ICP(Inductively Coupled Plasma) 토오치에서 보다 50 mm 더 길게 제작한 수평형 ICP 방출원을 제작한 후, ICP 방출분광분석기를 구성하였다. 신호대 잡음비 및 바탕선의 세기를 고주파 출력, 시료 유량, 알곤가스 유량 그리고 차단가스 유량변화에 대하여 측정하고 최적조건을 구했다. 이들 조건에서,수직형 플라스마와 비교하여 분광분석학적으로 비슷한 정도의 특징을 가진 바탕선 스펙트럼을 파장범위 200~500 nm에서 얻었다. 납(II), 220.35 nm의 방출선에서 검출한계가 11 ppb로 산출되었으며, 수직형과 비교하여 약 5배 낮은 값을 보였다.

  • PDF

환형 인덕티브 센서의 설계 및 압력센서로의 적용 (Ring-Shaped Inductive Sensor Design and Application to Pressure Sensing)

  • 노명규;김선영;백성기;박영우
    • 대한기계학회논문집A
    • /
    • 제39권10호
    • /
    • pp.995-999
    • /
    • 2015
  • 자기유도(inductive) 센서는 원리가 간단하고 경제적이어서 변위, 힘, 압력 등 다양한 물리량 측정에 사용된다. 본 논문에서는 고리 모양의 강판과 코일로 이루어진 간단한 구조의 자기유도 센서를 제안하였다. 센서의 인덕턴스를 자기회로 방법을 이용하여 추정하고 유한요소 해석을 통해 검증하였다. 고리의 고유 진동수를 Castigliano 정리와 등가 질량 방법을 이용하여 추정하고 실험 및 유한요소 해석을 통해 검증하였다. 기계적 진동에 영향을 주지 않도록 센서의 가진 주파수를 결정하였으며, 구동 및 신호처리 회로를 설계하여 센서를 제작하였다. 제작된 자기유도 센서를 유연관 내부의 유체 압력을 비침습적으로 측정하는데 활용하였다. 압력과 센서 출력 간의 관계를 이차식 형태로 표현하면 2% 이내의 정확도로 압력을 측정할 수 있어 압력 센서로서의 가능성을 확인하였다.

증기발생기 전열관의 입계부식에 대한 와전류검사 신호특성 (Signal Characteristics of Eddy Current Test for Intergranular Attack of Steam Generator Tubes)

  • 최명식;이덕현;조세곤;임창재;한정호;허도행
    • 비파괴검사학회지
    • /
    • 제22권2호
    • /
    • pp.198-202
    • /
    • 2002
  • 가동중인 증기발생기 전열관에서 발생하는 결함 유형 중의 하나인 입계부식은 방전가공에 의한 모의 시편 제작이 불가능하므로 입계부식에 대한 와전류검사 신호의 특성이 잘 알려져 있지 않다. 본 연구에서는 0.1 M sodium tetrathionate 용액에서 비확관 전열관에 입계부식을 형성시키고 와전류검사 신호를 수집하여 평가하였다. 이를 통하여 탐촉자의 종류와 주파수에 따른 선호 특성 및 입계부식의 깊이 변화에 따른 검출능을 비교하였다.

X선 고전압장치의 전파 및 배전압 정류방식에 따른 X선 출력 및 선질 비교 (Comparison of Output and Radiation Quality of X-rays according to the Full-Wave Rectification Method and Dual-Voltage Rectification Method of an X-ray Generator)

  • 김태곤;천민우;박용필
    • 한국전기전자재료학회논문지
    • /
    • 제23권7호
    • /
    • pp.534-538
    • /
    • 2010
  • X-ray systems for medical treatment use noninvasive procedures. Being capable of locally inspecting the inside of the body, X-ray systems are routinely used for basic diagnosis. X-ray systems to be used for medical purposes were originally made with a gas filled tube inside an induction coil in the initial stages of development but with this approach it becomes difficult to take a satisfactory picture through thick body sections, non invasively. However continued development made it possible to take non-invasive pictures of breasts, blood vessels and other body parts through thick body sections. Recently, high-voltage X-ray generators of more compact size, increased generation efficiency, and sophisticated output control have become possible. All of these features are made possible by the use of a high-frequency output from an inverter and a fast switching semiconductor device. In this paper, we describe a new X-ray generator operating with a resonant inverter in order to reduce switching loss and high frequency noise. In addition, in order to identify the differences amongst types of rectification, we have compared output and the quality of X-ray pictures obtained with full-wave rectification and dual-voltage rectification methods.