• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.714-716
• /
• 1997

In order to prevent the belt from being damaged by metal pieces, we developed multicoil-type metal detection system. This detects the presence of belt clips and position of metal pieces in ores being transported on conveyor belt. In this research, our coil sensor of multicoil-type metal detection system is divided into two parts, exciting part (transmitter coil) and sensing part composed of two receiver coils. Each receiver coil has several coils in the direction of belt width. Multicoil-type metal detection system is operated by supplying a transmitter coil with electric power resources to generate magnetic field, and then the change of magnetic flux resulted from a metal piece on the conveyor be a is induced into sensing coils. We can prevent detector from failing to catch metal pieces due to high threshold level produced by steel belt clips and male the sensitivity of belt-width direction uniform by using multicoil-type metal detection system. Besides, this developed system can recognize precise position and size of metal piece. The experiments shows that our multicoil-type metal detection system has better performances than the conventional metal piece detector.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.331-337
• /
• 2011

Purpose: The purpose of this study was to impact of force system change in finger spring that add helical coil one round on orthodontic force. Methods: The following conclusions were drawn from the experiment conducted after bending 90 samples with a CNC wire forming machine while changing the height and lumen size to 1mm - 3mm - 5mm and 2mm - 3mm - 4mm respectively in the coil of the force system in finger spring added with one wheel of helical coil of 18-8 stainless steel round wire (${\Phi}0.5mm$, spring hard) from Jinsung Co. in domestic market under the following conditions: Laboratory name = Instron 5942; Temperature($deg^{\circ}C$) = 18.00; Humidity(%) = 50.00; Rate 1 = 10.00000 mm/min; Compressive extension = 5.0mm. Results: When Coil height is 1, 3, 5mm and lumen size is 2, 3, 4mm reduce finger spring as mean value of compressive extension occasion maximum load(mN) increases as coil height rises, and lumen size grows to 5.0mm. And was expose that compressive load(mN) increases as coil position of finger spring rises and increase as lumen size is decrescent. Conclusion: As the adherence height of coil was raised from 1mm through 3mm to 5mm, compressive load increased. As the lumen size increased from 2mm through 3mm to 4mm, compressive load decreased. Therefore, these results suggest that it is desirable to lower the coil height and enlarge the lumen size to enhance the biomechanical efficiency of finger spring when manufacturing the finger spring for removable orthodontic devices.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1217-1223
• /
• 2006

Induction heating is a process that is accompanied with magnetic and thermal situation. This paper presents a simulation of a magneto-thermal coupled problem of an induction heating process for moving inductor coil. In the magnetic and thermal analyses, temperature-dependent magnetic and thermal material properties were considered. As the inductor coil moves in the process, solution domains corresponding to inductor changes into those of the air, and the solution domains of air change into those of the inductor. For these reasons, modeling of induction heating process is very difficult with general purpose commercial programs. In this paper, induction heating process for moving coil was simulated with the concept of traveling the position of the heating planes. Finite element program was developed and finite element results were compared with the experimental results.

• 전자공학회논문지SC
• /
• 제46권5호
• /
• pp.38-43
• /
• 2009

본 논문에서는 자기 벡터 포텐셜 해석을 통해 3-코일 구조를 갖는 금속 검출기 헤드가 수신 코일에 미치는 유도 전압을 구하고, 금속 물체의 특성이 송신 코일의 임피던스에 미치는 영향을 유도하였다. 이러한 해석을 통하여 최적의 검출 성능을 위한 송신 코일과 수신 코일 간의 거리를 구하였고, 최대 유도 전압을 출력하는 금속의 위치를 유도하였다. 또한 기존의 수식과 비교하여 본 논문의 자기 벡터 포텐셜 해석에 대한 타당성을 입증하였다.

• 한국항행학회논문지
• /
• 제19권3호
• /
• pp.237-243
• /
• 2015

본 논문에서는 전자기 유도 방식을 이용하여 무선전력전송 시스템을 구현하고 전송 효율을 측정하였다. 또한 수신부 코일의 세부 조건 변화에 따른 효율 변화를 확인하고 최적의 코일 조건을 제시하였다. 제작한 송수신부 회로를 이용하여 수신 코일 위치에 따른 전압 변화를 측정하고, 같은 위치에서 인덕턴스 값 변화에 따른 전압변화를 측정하였으며, 휴대폰 충전 시간을 측정하는 앱을 개발하여 충전 상태에 따른 무선전력전송 충전 시간을 비교하여 이를 통해 최적의 무선전력전송 시스템을 구현하고자 하였다. 개발된 전자기 유도방식을 이용한 무선전력전송 시스템은 주파수 125 kHz를 사용하며, 핸드폰 50%에서 60%까지 충전 시 유선 충전기는 16분, 무선충전기는 23분의 충전시간을 가졌다.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.406-417
• /
• 1997

초크랄스키법들 의한 8인치 실리콘 단결정 성장계에 대칭과 비대칭 커스프 자장을 인가하여 결정을 성장시켰을 때 축방향으로 일정한 산소농도분포를 가질 수 있는 적절한 인가 자장의 크기와 비대칭도에 대한 수치해석적 연구를 수행하였다. 결정이 성장할 때 커스프 자장의 형태가 유지되는 방법으로 도가니의 위치를 변화시키는 방법과 인가코일의 위치를 변화시키는 방법을 비교하였다. 대칭 커스프 자장이 인가된 경우, 축방향으로 일정한 산소농도를 얻을 수 있는 자장의 강도변화는 결정이 성장함에 따라 아래로 볼록한 형태를 띠었다. 축밟향으로 일정한 산소농도분포를 갖기 위해 도가니의 위치를 변화시키는 방법과 코일의 위치를 변화시키는 방법을 비교한 결과 비슷한 산소농도의 표준편차값을 가짐을 알 수 있었다. 비대칭 자장이 인가된 경우, 축방향으로 일정한 산소농도 분포를 얻기 위해서는 비대칭도는 결정이 성장함에 따라 점차 증가하는 양상을 보였다.

• Smart Structures and Systems
• /
• 제34권1호
• /
• pp.41-50
• /
• 2024

The accurate measurement of temperature in the ground source heat pump system is crucial for assessing the thermal response of the system and validating the numerical model for parametric study, which is necessary for the thermal performance evaluation of the geothermal energy system. Conventional temperature sensors have some disadvantages such as they are difficult to install, and their position can be shifted during the backfill process of the ground heat exchanger. In this study, Fiber Bragg Grating (FBG) sensors were used to measure the temperature change of a recently developed ground heat exchanger (Coil Column Unit, CCU). FBG sensors were first calibrated in a thermal chamber alongside a correlation sensor (RTD sensor). The calibrated sensors were then mounted on the pipe surface at each spiral of the CCU to measure how temperature changes during the in-door mockup thermal response test. Finally, the measurement results of the FBG sensors were verified with a finite element coded program. The results indicated that the temperature difference between the numerical analysis and the experiment was less than 1%, which is significantly lower than that of the previous study using the RTD sensors. Therefore, it is feasible to apply FBG sensors for temperature measurement during the operation of the TRT of the geothermal energy system.

• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.699-706
• /
• 2018

본 연구는 array 코일을 이용한 검사 시 코일의 위치변화에 따른 신호강도를 측정하여 영상의 신호강도가 급격히 저하되지 않는 기준 방향과 거리를 제시함으로써, 동일선상에 코일들이 위치하지 않았을 경우 신호강도가 저하되는 문제점을 개선해 보고자 하였다. 연구방법은 두 부분으로 나눠져 있는 array 코일에 multi-purpose MRI 팬텀을 위치시킨 다음 array 코일의 앞부분을 상, 하, 좌, 우 네 방향으로 중심에서 2 cm 씩 10 cm 까지 이동하며 영상을 획득한 후 신호강도를 측정하여 비교평가 하였다. 연구결과, T1, T2 강조 영상 모두 상 방향을 제외한 하 방향과 좌, 우 방향의 위치변화가 2 cm 이내인 경우 기준 신호강도인 중심의 신호강도와 유의한 차이가 없어 동일한 신호강도를 나타냄을 알 수 있었다. 결론적으로 array 코일을 이용한 검사 시 여러 가지 원인에 의해 동일선상에 코일들을 위치시킬 수 없을 경우 상 방향을 제외한 나머지 방향의 위치변화를 중심에서 2 cm 이내로 설정한다면 위치변화로 인해 신호강도가 저하되는 문제점을 개선할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1146-1151
• /
• 2003

Pneumatic servo valve is an electro-mechanical device which change electric signals to a proper pneumatic signals, that is, flowrate and pressure. In this study, a pneumatic servo valve was designed and each simulation was conducted on any variation in the flowrate depending upon the magnetic force of the linear force motor and the displacement of the spool. And permanent magnet was used as a material for the plunger of the servo valve. Thereby, a low electrical power consumption type coil was desinged. And a modeling for the coil design was conducted by using the magnetic circuit. also, the feasibility of the modeling was verified by using a commercial magnetic field analysis program. The designed and fabrication of the spool and sleeve, position sensor, servo controller and the dynamic characteristic verified by the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2203-2204
• /
• 2006

When the coil with alternating current approaches to the conductor the eddy current flows in conductor. Eddy current is concentrated on the conductor surface and decrescent because of skin effet.. In this paper investigated eddy current characteristic that is happened in conductor. Analyzed characteristic using electromagnetic field finite element analysis program that is commercialized to analyze value of eddy current and penetration depth. Analyzed creation value of eddy current and penetration depth in conductor that change operation frequency and the material of conductor, coil outside diameter, inside diameter, position, type of conductor from analyzed eddy current characteristic. The results. using distribution of eddy current and penetration depth data is that will help to forecast ECT(Eddy Current Testing), Eddy current application and use field, eddy current loss.