• 제목/요약/키워드: Coefficient Diagram Method(CDM)

검색결과 38건 처리시간 0.037초

FFC Design for PI Flow Control System Designed by CDM

  • Oh, Kyu-Kwon;Yu, Kee-Ho
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.151.3-151
    • /
    • 2001
  • A design of PI controller to be used to control the first-order lag plus dead time process, such as a flow process, by the coefficient diagram method (CDM) is investigated. The factor of the dead time of process is first approximated to be the first-order by the Pade approximation. The response of the flow control system designed by CDM satisfy both transient and steady state specifications. However, the transient response generally still has long rise time. In order to improve the speed of the system response, a feedforward controller (FFC) is added into the PI control system. The structure of the FFC is a phase lead structure with two designed parameters and one derivative time obtained from the reaction curve of the flow process ...

  • PDF

계수도법을 이용한 휠체어 로봇의 자세제어 (Motion control of a wheel-chair robot using CDM)

  • 박성진;정상철;김관형;안영주;이형기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 D
    • /
    • pp.2046-2048
    • /
    • 2002
  • In this paper, I designed the inverter pendulum controller to controll the position of a wheel-chair. I used coefficient diagram method (CDM) to design the controller. The CDM is available, because it can make an engineer know all about the characteristic, stability, response time and robustness, of closed loop system. Writing this paper, I simulated the controller to know wheather is can controll the position of wheel-chair using the theorem of inverter pandulum controll, and I identified the usefulness of it.

  • PDF

The Design and Implementation of Electromotion Curtain System using PLC and CDM Controller

  • Choo, Yeon-Gyu;Kang, Sung-Soo;Kim, Bong-Gi
    • Journal of information and communication convergence engineering
    • /
    • 제8권4호
    • /
    • pp.443-448
    • /
    • 2010
  • The electrical curtain is an electronic product which is most suitable for the sphere of intelligent home network. It provides the basic feature of intelligent home network such as the followings; various functions, powerful control. It also becomes the ideal technology with inexpensive power-line protocol, energy saving and solar power generation. Generally it is a suitable motor for BLDC to move the electrical curtain, because it provides the maintenance without difficulty, long-lived use with good efficiency. On this paper, we proposed the BLDC motor controller designed by CDM(Coefficient Diagram Method) and evaluated its performance with a simulation of the plant, designed the electrical curtain using BLDC motor and powe-line protocol.

Web Guide Process in Cold Rolling Mill : Modeling and PID Controller

  • Ahn, Byoung-Joon;Park, Ju-Yong;Chang, Yu-Shin;Lee, Man-Hyung
    • Journal of Mechanical Science and Technology
    • /
    • 제18권7호
    • /
    • pp.1074-1085
    • /
    • 2004
  • There are many intermediate web guides in cold rolling mills process such as CRM (cold rolling mill), CGL (continuous galvanizing line), EGL (electrical galvanizing line) and so on. The main functions of the web guides are to adjust the center line of the web (strip) to the center line of the steel process. So they are called CPC (center position control). Rapid process speed cause large deviation between the center position of the strip and the process line. Too much deviation is not desirable. So the difference between the center position of the strip and the process line should be compensated. In general, the center position control of the web is obtained by the hydraulic driver and electrical controller. In this paper, we propose modelling and several controller designs for web-guide systems. We model the web and guide by using geometrical relations of the guide ignored the mass and stiffness of the web. To control the systems, we propose PID controllers with their gains tuned by the Ziegler-Nichols method, the H$\_$$\infty$/ controller model-matching method, and the coefficient diagram method (CDM). CDM is modified for high order systems. The results are verified by computer simulations.

CDM Controller Incorporating Friction Compensation for Rotational Inverted Pendulum

  • Cahyadi, Adha I.;Benjanarasuth, Taworn;Isarakorn, Don;Ngamwiwit, Jongkol;Komine, Noriyuki
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1901-1905
    • /
    • 2004
  • A controller designed by CDM for a servo type system which is an augmented system constructed from a rotational inverted pendulum with an integrator added to its arm, is presented in this paper. In order to be able to apply the CDM concept, the augmented system must be linearized and converted into controllable canonical form. Then, the controller consisting of the state feedback gain matrix and an integral gain in the sense of CDM can be obtained. This shows that design procedure for the proposed controller is easy. The experimental results obtained from the rotational inverted pendulum controlled by the proposed controller show that the system response has no steady-state error, however, the oscillation amplitude of the arm angle is still significant. Therefore, in this paper, the friction compensation using Coulomb friction with stiction is also added to the controller. The oscillation amplitude of the arm angle that can be reduced remarkably is also shown in the experimental results.

  • PDF

진동억제를 위한 자동추정 퍼지제어기 설계 (Design of Auto Tuning Fuzzy Controller for Vibration Suppression)

  • 박재형;김성대
    • 대한전자공학회논문지TE
    • /
    • 제39권2호
    • /
    • pp.118-123
    • /
    • 2002
  • 토크 전달시스템은 다수의 기어와 커플링이 유연하게 구성되어 있으므로, 모터의 속도가 갑자기 변할 때 비틀림 진동이 발생한다. 따라서 모터의 정확한 응답 특성을 얻기 위해서는 반드시 이 진동을 억제시켜야 한다. 이와 같이 진동억제는 모터제어에 있어서 매우 중요하다. 진동억제를 위해, 특히 2관성 시스템의 제어를 위해 다양한 제어방법들이 소개되었다. 토크의 비틀림 현상으로 인해 발생하는 진동을 억제하기 위해 토크의 비틀림 성분을 궤환시켜 외란 관측기 및 필터를 사용하여 진동을 억제하는 방법이 소개되었고, 이 방법은 CDM으로 적절한 비례 제어기와 필터의 계수 값을 설계하여 진동을 억제하는 방법이다. 그러나 CDM을 이용하여 설계된 제어기는 외란이 인가될 경우에 적응성이 떨어짐을 알 수 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 퍼지를 사용하여 제어기의 파라메터 $K_P$를 자동적으로 추종하는 자동추정 퍼지제어기를 제안하고 이 제어기의 성능을 시뮬레이션을 통해 검증하였다.

단상 UPS용 인버터의 강인제어기 설계 (Design of Robust Controller of Inverter for Single UPS)

  • 김제홍;김재식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
    • /
    • pp.233-236
    • /
    • 2001
  • In this paper, a robust controller for UPS inverter is designed using CDM (Coefficient Diagram Method) developed by S. Manabe, by which a low order controller guaranteeing the stability and robustness is easily designed. The proposed controller consists of two control loops, the inner current control loop and the outer voltage control loop. The robustness of the proposed controller is verified through the theoretic evolution and its simulation.

  • PDF

The Design of PIDA Controller with Pre-Compensator

  • Kang, Shin-Chool;Cho, Yong-Sung
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.301-306
    • /
    • 2003
  • PID controller is applied mostly to two-order system. In third-order or higher- system, it's impossible to get high response quality because of having more zero point than the number of zero point being in the PID controller. To solve those, Jung & Dorf suggested a new type of PIDA controller and solved problen of a third-order system. But, as the result of getting step response using PIDA controller, rising time is very quickly but wide overshoot is happened. Beside designing PIDA controller with using CDM(Coefficient Diagram Method) suggested by shunji manabe. But, In Performance standard, CDM decreases overshoot to desired but rising time is very slow. Therefore this paper suggest a PD-PIDA controller for low overshoot with PD type Pre-compensator. This paper applied designed PD-PIDA controller to position control of 3-Phase induction motor.

  • PDF

A Simulation of I-PDA Controller for Induction Motor

  • Choo, Yeon-Cyu;Kim, Seung-Cheol;Lee, Ihn-Yong;Cho, Yong-Sung
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.1521-1523
    • /
    • 2005
  • PID controller is applied mostly to two-order system. In third-order or higher- system, it's impossible to get high response quality because of having more zero point than the number of zero point being in the PID controller. To solve those, Jung & Dorf suggested a new type of PIDA controller and solved problen of a third-order system.. But, as the result of getting step response using PIDA controller, rising time is very quickly but wide overshoot is happened. Beside designing PIDA controller with using CDM(Coefficient Diagram Method) of Shunji Manabe decreases overshoot to desired but rising time is very slow. Therefore this paper suggest a I-PDA controller for low overshoot and fast responsibility. This paper applied designed PD-PIDA controller to position control of 3-Phase induction motor.

  • PDF

매개변수적 강인제어 및 모델 식별 GUI Tool (Parametric Robust Control and Identification(PROCI) Toolbox)

  • 조태신;우영태;최선욱;기진호;김동형;정재윤;양대정;이재관;김영철
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.380-380
    • /
    • 2000
  • We have developed a design/analysis tool for use with Mat lab whick is named as "Parametric Robust Control and Identification(PROCI)". The tool is composed of three parts: Part i) consists of the identification of the continuous time transfer function by using either time domain input-output data or frequency response data, which might be experimentally obtained. Part ii) is the CDM synthesis of classical controller such as PID, Lead/Lag compensators. In part iii), the analysis of robustness of overall system can be dealt with. This tool allows us to analyze completely most of robustness issues with respect to the interval uncertaintyncertainty

  • PDF