• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.139-142
• /
• 2002

제어 시스템에서 제어기를 설계하는 방법에는 기존 PID 설계 기법인 Ziegler-Nichols와 Jung, R. C. Dorf 방법들이 있다. 본 논문은 Shunji Manabe의 계수도법(CDM Coefficient Diagram Method)을 이용하여 Ball-Beam 시스템을 제어하기 위한 PID 제어기를 설계한다. PID 제어기의 각 파라메터인 P, I, D 계수는 시스템의 속도와 안정성에 기인하는 표준 안정도 지수$(\gamma)$와 등가시정수$(\tau)$ 로부터 얻 어진다. 등가시정수$(\tau)$와 안정도 지수$(\gamma)$는 제어기 파라메터의 대수적 형태와 절대적인 관계가 있다. 그러므로 설계된 제어기로부터 빠른 상승시간과 안정된 정상상태 응답을 얻을 수 있다. Ball-Beam 시스템에 CDM 제어기를 적용한 결과 시스템의 안정도, 정확성 그리고 강인성에 있어서 퍼지 제어기나 PID 제어기에 비해 뛰어난 응답 특성을 확인하였다

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.239-242
• /
• 2008

본 논문은 3차 이상의 고차 시스템에 적용 가능한 Jung & R. C. Dorf이 제안한 새로운 형태의 PIDA 제어기 설계에서 오버슈트에 대한 문제점을 해결하기 위해 Shunji Manabe에 의해 제안된 CDM(Coefficient Diagram Method)을 이용하여 PIDA 제어기를 설계하고, PD형 보상기를 추가하여 PD-PIDA 제어기를 제안한다. 설계된 PD-PIDA 제어기를 이용하여 3상 유도전동기에 적용하고 그 결과를 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.66.4-66
• /
• 2002

In this paper, coefficient diagram method is applied to a center position controller design of the web. The significant property of this controller is the designer can design the controller simultaneously a good balance of stability, response, and robustness. Manabe's CDM is useless for designing high-order plant. We proposed a modified CDM which can be called as approximated pole placement method. The practicality of the proposed method is shown through computer simulation.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.455-457
• /
• 1998

This paper designs a noise controller for the small cavity using Coefficient Diagram Method(CDM). In the small cavity system, there exist nonlinear characteristics such as uncertain-time delay and parameter variation. In the controller design of nonlinear system with uncertainty need to the higher order controller or complexity computation. The coefficient diagram is convenient implementation of the control system design method, that is utilized as a vehicle to collectively express the important features of the system and an improved version Kessler's standard form and the Lipatov stability condition of a constitutes the theoretical basis. Simultaneously, it is provided a desired specification, such as the robustness, the stability, faster response, and lower order controller. A simulation of the system with the proposed controller shows sufficient noise cancelation in small cavity.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.594-597
• /
• 2005

In this paper, I-PDA controller based on Coefficient Diagram Method incorporating feedforward controller is applied by robotic manipulators. Robotic manipulator models contain uncertain elements, which are not known exactly. Therefore, the dynamics of robotic manipulators are generally classified as uncertain dynamic system. The controller considered for the robotic manipulators need to move payloads of different masses from one point to another with good balance of the stability and response, consequently we propose I-PDA controller based on Coefficient Diagram Method incorporating FFC. The effectiveness of the controller for different system type of robotic manipulators is demonstrated by the simulation results.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.250-256
• /
• 2001

This paper deals with a design problem of a decentralized controller with a strongly connected two-input two-output multivariable system. To this end, we present a classical design approach which consists of two main steps: one is to decompose the multivariable plant into two single-input single-output systems by means of the Individual Channel Design (ICD) concept, the other is to design controller of each channel by the Coefficient Diagram Method (CDM) so that it satisfies, especially, time domain specifications such as settling time, overshoot etc.. A design procedure was proposed and then was applied to a 2$\times$2 hot rolling mill plant. Simulation results showed that the proposed method has excellent control performances.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2240-2245
• /
• 2003

In this paper, the controller design by coefficient diagram method (CDM) for controlling the trolley position, load-swing angle and hoisting rope length of the overhead crane system simultaneously is proposed. The overhead crane system is a MIMO system consisting of two inputs and three outputs. Its mathematical model is nonlinear with coupling characteristics. This nonlinear model can be approximated to obtain a linear model where the first input mainly affects the trolley position and the load-swing angle while the second input mainly affects the hoisting rope length. In order to utilize the CDM concept for assigning the controllers, namely PID, PD and PI controllers separately, the model is approximated to be three transfer functions in accordance with trolley position, the load-swing angle and the hoisting rope length controls respectively. The satisfied performances of the overhead crane system controlled by the these controllers and fast rejection of the disturbance effect occurred at the trolley position are shown by simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.979-981
• /
• 1999

This paper designs a ball and beam system using Coefficient Diagram Method (CDM). The ball and beam system is used in many undergraduate control classes to verify a control algorithm or for pure educational purposes. Recently CDM is known to be useful for designing a controller with relatively easy procedure and procedures a low order, no overshoot, and robust controller In this paper. CDM is applied to design a controller for the ball and beam system, and the controller is compared to that of LQG method. The result show that CDM gives better controller than LQG method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2001

For a parametric uncertain system, there are many results on stability analysis, but only a few synthesis methods. In this paper, we proposed a new target polynomial decision method for the parametric uncertain system to stabilize the closed loop system with maximal parametric $l_2$ stability margin. To this, we used both Lipatov Theorem and coefficient diagram method(CDM). To show the effectiveness of the proposed method, we designed a robust controller for the inverted pendulum system with parametric uncertainties using fixed order pole assignment(FOPA) method and its performance was compared with that of the ${\mu}$ synthesis methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1847-1852
• /
• 2003

Ultrasonic motors have many excellent performances. A variety of ultrasonic motors has been developed and used as an actuator in motion control systems. However, this motor has nonlinear characteristics. Therefore, it is difficult to achieve the precise position control system incorporating with the ultrasonic motor. This paper describes a position control scheme for traveling-wave type ultrasonic motor using a pseudo-derivative control with feedforward gains (PDFF) controller designed by the coefficient diagram method (CDM). The PDFF control system satisfies both the tracking and regulation performances, which are the most important for the precise position control system. The CDM is shown to be an efficient and simple method to design the parameters of PDFF controller. The effectiveness of the proposed control system is demonstrated by experiments.