• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.659-668
• /
• 2006

The optimization of supercritical water oxidation (SCWO) process for decomposing nitromethane was studied by means of a design of experiments. The optimum operating region for the SCWO process to minimize COD and T-N of treated water was obtained in a lab scale unit. The authors had compared the results from a SCWO pilot plant with those from a lab scale system to explore the problems of scale-up of SCWO process. The COD and T-N in treated waters were selected as key process output variables (KPOV) for optimization, and the reaction temperature (Temp) and the mole ratio of nitromethane to ammonium hydroxide (NAR) were selected as key process input variables (KPIV) through the preliminary tests. The central composite design as a statistical design of experiments was applied to the optimization, and the experimental results were analyzed by means of the response surface method. From the main effects analysis, it was declared that COD of treated water steeply decreased with increasing Temp but slightly decreased with an increase in NAR, and T-N decreased with increasing both Temp and NAR. At lower Temp as $420{\sim}430^{\circ}C$, the T-N steeply decreased with an increase in NAR, however its variation was negligible at higher Temp above $450^{\circ}C$. The regression equations for COD and T-N were obtained as quadratic models with coded Temp and NAR, and they were confirmed with coefficient of determination ($r^2$) and normality of standardized residuals. The optimum operating region was defined as Temp $450-460^{\circ}C$ and NAR 1.03-1.08 by the intersection area of COD < 2 mg/L and T-N < 40 mg/L with regression equations and considering corrosion prevention. To confirm the optimization results and investigate the scale-up problems of SCWO process, the nitromethane was decomposed in a pilot plant. The experimental results from a SCWO pilot plant were compared with regression equations of COD and T-N, respectively. The results of COD and T-N from a pilot plant could be predicted well with regression equations which were derived in a lab scale SCWO system, although the errors of pilot plant data were larger than lab ones. The predictabilities were confirmed by the parity plots and the normality analyses of standardized residuals.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.85-95
• /
• 2018

In this research, a biofilter system equipped with a biofilter process and a humidifier composed of a fluidized aerobic and an anoxic reactor, was constructed to treat odorous waste air containing hydrogen sulfide, ammonia and VOC, frequently generated from pig and poultry housing facilities, compost manufacturing factories and publicly owned facilities. Its optimum operating condition was revealed and discussed. In the experiment of complex feed, the ammonia of fed-waste air was removed by ca. 75% and more than 20% at the stage of the humidifier and the biofilter, respectively. The toluene of the fed-waste air was removed by ca. 20% and more than 70% at the stage of the humidifier and the biofilter, respectively. Therefore the water-soluble ammonia and the water-insoluble toluene were treated mainly at the stage of the humidifier and the biofilter, respectively. In addition, hydrogen sulfide was almost absorbed at the stage of the humidifier so that it was not detected at the biofilter process. In the experiment of ammonia-containing feed, the ammonia of fed-waste air was removed by ca. 65% and 35% at the stage of the humidifier and the biofilter, respectively. Its removal efficiency of ammonia at the stage of the humidifier was 10% less than that in the experiment of complex feed, due to no supply of such carbon source as toluene required in the process of denitrification. In the experiments of complex feed, ammonia-containing feed with and without (instead, glucose) the addition of yeast extract, the absorption rates of ammonia-nitrogen were ca. 0.28 mg/min, 0.23 mg/min and 0.27 mg/min, respectively. The corresponding denitrification rates in the anoxic reactor were 0.42 mg/min, 0.55 mg/min and 0.27 mg/min, respectively. In addition, in the modeling of bubble column(the fluidized aerobic reactor of the humidifier) process, the value of specific surface area(a) of bubbles multiplied by enhanced mass transfer coefficient (E $K_y$) was evaluated to be 0.12/hr.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1419-1425
• /
• 2013

The aim of this study was to investigate the method validation for the determination of eleutherosides (B and E) and ${\beta}$-glucan in Acanthopanax (A.) koreanum. This medicinal plant reportedly mainly included eleutherosides which exhibit the pharmacological effects, and ${\beta}$-glucan substantially enhances the function of the immune system by activating macrophages. The specificity, linearity, precision, accuracy, limit of detection (LOD, S/N=3), and limit of quantification (LOQ, S/N=10) were measured by HPLC and enzymatic methods. Our results showed that the coefficient of calibration correlation ($R^2$) for eleutheroside B and E were 0.9997 and 0.9999, respectively. The limits of detection (LOD) for eleutheroside B and E were $0.050{\mu}g/mL$ and $0.025{\mu}g/mL$, respectively. The recovery rate of eleutheroside B and E were revealed in the high range of 100.66~110.04% and 94.26~111.62%, respectively. The inter-day precision of eleutheroside B and E in the root and stem in A. koreanum were 1.4~5.0% and 1.1~2.5%, respectively. The intra-day precision of eleutheroside B and E in the root and stem in A. koreanum were 2.8~2.9% and 0.4~1.1%, respectively. Furthermore, the inter-day and intra-day precision of ${\beta}$-glucan in the stem, leaf, and fruit of A. koreanum were 1.32~5.67% and 8.01~11.76%, respectively. In conclusion, the methods were validated for the detection of eleutherosides and ${\beta}$-glucan in A. koreanum.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1610-1616
• /
• 2016

This study aimed to establish an optimal extraction process and high performance liquid chromatography-ultraviolet (HPLC-UV) analytical method for determination of 3,5-dicaffeoylquinic acid (3,5-DCQA) as a part of materials standardization for the development of a xanthine oxidase inhibitor as a health functional food. The quantitative determination method of 3,5-DCQA as a marker compound was optimized by HPLC analysis using a Luna RP-18 column, and the correlation coefficient for the calibration curve showed good linearity of more than 0.9999 using a gradient eluent of water (1% acetic acid) and methanol as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 320 nm. The HPLC-UV method was applied successfully to quantification of the marker compound (3,5-DCQA) in Aster glehni extracts after validation of the method with linearity, accuracy, and precision. Ethanolic extracts of A. glehni (AGEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 30, 50, 70, and 80% ethanol for 3, 4, 5, and 6 h, respectively. Among AGEs, 70% AGE at $70^{\circ}C$ showed the highest content of 3,5-DCQA of $52.59{\pm}3.45mg/100g$ A. glehni. Furthermore, AGEs were analyzed for their inhibitory activities on uric acid production by the xanthine/xanthine oxidase system. The 70% AGE at $70^{\circ}C$ showed the most potent inhibitory activity with $IC_{50}$ values of $77.01{\pm}3.13{\sim}89.96{\pm}3.08{\mu}g/mL$. The results suggest that standardization of 3,5-DCQA in AGEs using HPLC-UV analysis would be an acceptable method for the development of health functional foods.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.214-219
• /
• 2019

Purpose: The aim of this study was to evaluate the correlation between inter-condylar width and inter-maxillary first molar width to present the criteria for prosthetic reconstruction of dental arch width in maxillary and mandibular fully edentulous patients. Materials and Methods: 120 Koreans (60 males and 60 females) who underwent the cone beam computerized tomography (Cone-beam CT) were selected. The Cone-beam CT images were analysed using Invivo 5.1. After reorientation of axis, inter-maxillary first molar width was measured by clicking both mesio-buccal cusp tip of maxillary first molar. And inter-condylar width was measured by clicking both middle points of condyles. The collected data were analysed with SPSS Version 20.0 and statistical significance of the correlation between inter-condylar width and inter-maxillary first molar width was verified by Pearson's correlation analysis. Results: The mean inter-condylar width of Korean was 105.9 mm, and that of male (108.3 mm) was statistically significantly wider than the female (103.4 mm). The inter-maxillary first molar width of Korean was 57.1 mm, and that of male (57.9 mm) was statistically significantly wider than the female (56.2 mm). Pearson's correlation analysis between inter-condylar width and inter-maxillary first molar width showed a Pearson correlation coefficient of 0.614 and statistically significantly positive correlation. Conclusion: Intercondylar width and inter-maxillary first molar width showed positive correlation and the average ratio of inter-condylar with and inter-maxillary first molar width was 1:0.54. Based on the results of this limited study, inter-condylar width can be used as a guide for setting up dental arch width in fully edentulous patient.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.273-280
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of international logistics strategies as a countermeasure in changes of international logistics environments. This region represents most severe competition among Mega hub ports in the world in terms of container cargo throughput at the onset of the 21 st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN. which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even compared with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjugn Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none have comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines. Moreover, through the comparative evaluation between major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korea ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently qualified in ASEAN.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.122-130
• /
• 2010

The Study takes the rivers in Zhouzhuang - traditional Chinese Kangnam watery landscape as the object. The purpose of this study is to grasp the relationships between visual characteristics and the preference. The following is the research process: Firstly, the theoretical study of Zhouzhuang, the traditional Kangnam region in China, is conducted, the watery landscape is taken pictures, and 22 photos are selected. Secondly, in order to grasp the visual preference and landscape characteristics of the watery landscape in Zhouzhuang, 22 pictures and 25 pairs of adjectives are adopted for the questionnaire survey. Thirdly, in order to have a better understanding on the physical properties and effects of physical quantity on the preference, the occupation ratios of buildings and sculptures, natural elements, footpaths, bank revetments and other landscape elements are calculated, and the mean analysis, dispersion analysis and regression analysis are conducted. In order to grasp the landscape characteristics and preference factors, 25 pairs of adjectives are used to conduct the factor analysis. In order to grasp the effects of characteristics of visual factors on the preference, the dispersion analysis and regression analysis are carried out. The results are as follows: From the results of the landscape preference analysis, in the No.22 photo with the top preference, 11 pairs of adjectives, namely, "harmonious-disharmonious", "beautiful-ugly", "rural-urban", "soft-rough", "stable-instable", "romantic-realistic", "cheerful-gloomy", "brilliant-simple", "natural-artificial", "familiar-strange", and "clean-dirty" have positive effects on watery landscape. It can be viewed as the relatively important factor in the visual preference. In terms of the results of visual physical quantity analysis of traditional Chinese Kangnam watery landscape, the landscape with high occupation ratio of buildings and sculptures has positive effects on visual preference. The results of analysis of visual physical quantity and preference show that the preference degree increases as the occupation ratio of footpath area increases. The analysis results of visual characteristics of traditional Chinese Kangnam watery landscape identify four factors, namely psychological factor, cultural factor, condition factor and physical factor. It can be concluded from the results of analysis of the relationships between visual preference and visual characteristics that the return coefficient B of the psychological factor is +0.936. It can significantly affect the watery landscape, so it can be identified as the most important factor among the visual preference factors of Chinese Kangnam watery landscape.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.167-176
• /
• 2008

The variation characteristics of groundwater level with distance from shoreline at Jeju Island was investigated using groundwater level data monitored from 257 wells for dry season (December 1998) and wet season (July 1997), respectively. Groundwater levels of the dry season were $7.46{\sim}203.8\;m$ with an average of 60.49 m, while those of the wet season were $4.01{\sim}204.10\;m$ with an average of 57.66 m. Groundwater level of the dry season was higher than that of the wet season, which was caused by heavy rains between June and October, 1998 at the Jeju Island. Correlation coefficients between altitude and groundwater level for dry and wet seasons were above 0.86, and those between dry season and wet season groundwater levels were very high above 0.95. 257 groundwater level data were classified at an interval of 500 m. Average values for altitude, groundwater levels and distance from shoreline were calculated for 17 intervals. Altitude and groundwater level fur dry and wet seasons at $0{\sim}4\;km$ intervals were increased with distance from shoreline, but those at $4{\sim}9\;km$ intervals were irregularity. Linear functions of the groundwater level for dry and wet seasons as distance from shoreline were estimated, and the coefficient of determinant at $0{\sim}4\;km$ interval data was higher than it at $0{\sim}9\;km$ interval data. Increasing rate of groundwater level at $0{\sim}4\;km$ intervals was more 2 times than it at $0{\sim}9\;km$ intervals. This results are caused by linear increase of groundwater level to 4 km from shoreline and by irregularity of groundwater level at the $4{\sim}9\;km$ intervals.

• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.173-182
• /
• 2004

We carried out a validation-calibration study of the food frequency questionnaire (FFQ) that we had previously developed for a community-based cohort of the Korean Genome and Health Study of the Korea National Genome Research Institute. We have collected a total of 254 3-day diet records (DRs) from 400 subjects, 200 each randomly selected from the two study cohorts of Ansung and Ansan. FFQ was administered at the time of cohort recruitment in 2001, and DRs were collected during a two month period from January through February of 2002. The mean age was 52.2 years. Farming for men and housewife for women were the most common occupations. The majority of the subjects had undergone 6∼12 years of education. The general characteristics including demographic and other data were not different from the total cohort subjects. Absolute levels of consumed nutrients including total energy (energy), protein, fat, carbohydrate, calcium, phosphorus, sodium, potassium, iron, retinol, carotene, vitamin A, thiamin, riboflavin, niacin and vitamin C were compared. The average of energy intake was not significantly different between the data collected by the 2 methods. However, consumptions of protein and fat were higher in data of DRs, whereas that of carbohydrate was higher in FFQ data. Significant correlation of each nutrient consumption between the data sets was observed (p ＜ 0.05) except in the case of iron, while the average correlation coefficient between them was 0.22 ranging from 0.33 for energy to 0.11 for iron. The results of cross classification by quantile for exact classification ranged from 25.2% (carotene) to 35.0% (phosphorus), and from 64.6% (vitamin A) to 76.4% (retinol) for adjacent classification. The proportion of completely opposite classification was 8.1% in average. Calibration slope was estimated by regression and calibration parameters ranged from 0.025 for carotene to 0.423 for niacin. We conclude that the FFQ we have developed is an appropriate tool for assessing the nutrient intakes as ranking exposures in epidemiology studies in view that amounts of consumed nutrients obtained by FFQ were similar to those collected by DRs, that correlations between consumed nutrients collected by these methods were significant, and that classification results were relatively fair. The correlation coefficients, however, were lower than expected, which may be mainly due to the survey season. In fact, any short-term dietary survey cannot accurately reflect the overall dietary intakes that change heavily depending on seasons. Further studies including the analysis of chemical indices would be helpful for the studies of causal relationship between the diet and disease.